Thermal Expansion · Power · Intermediate

How to Build a Self-Sustaining Tree Oil Power Plant

Running out of coal and lava is a constant struggle in early-to-mid modded Minecraft, making a renewable power source essential for automation. This guide will walk you through building a self-sustaining Tree Oil power plant using Thermal Expansion machines. Once built, this closed-loop system generates passive, infinite Redstone Flux (RF) without requiring any complex farming machinery or manual fuel gathering.

What you need

  • 4 to 8 Arboreal Extractors
  • 1 Fractionating Still
  • 1 to 2 Compression Dynamos
  • 1 Aqueous Accumulator (and 2 buckets of water)
  • 1 Redstone Flux Cell (optional, for energy buffering)
  • Spruce or Oak Saplings, plus Bone Meal to grow them
  • Fluid pipes, item cables, and RF power cables (from Thermal Dynamics or any compatible logistics mod)
  • Crescent Hammer (for machine configuration and rotation)
  • Hardened or Reinforced Integral Components (for scaling output later)

Step by step

  1. 1Grow Your Extraction Trees

    Find a flat area for your power plant and plant one or two saplings, leaving at least three blocks of space around the trunks. Spruce trees are highly recommended because they grow straight and consistently yield Resin in modern versions of the Thermal Series (check JEI in your specific modpack to confirm which tree produces Resin). Use Bone Meal to grow the saplings into full-sized, natural trees. Do not break any of the leaves, as the machines require a living tree to function.

    Tip: A 2x2 Mega Spruce tree allows you to place up to eight Arboreal Extractors around the base for maximum compact fluid production.

  2. 2Place the Arboreal Extractors

    Place your Arboreal Extractors directly against the bottom logs of the grown trees, ensuring the front tapping nozzle faces the wood. You can place up to four extractors around a single 1x1 tree trunk. Once placed, open each extractor's GUI to verify it has detected the tree; you should see the internal tank slowly filling with Resin after a brief cycle.

    Tip: You can feed Bone Meal or Phyto-Gro into the Arboreal Extractor's item slot to significantly boost its fluid generation speed, though it works completely free without fertilizer.

  3. 3Route Resin to the Fractionating Still

    Place a Fractionating Still a few blocks away from your trees. Open the Configuration tab (the gear icon) on your Arboreal Extractors, set the back or top faces to Output (Orange), and enable the Auto-Output button. Connect fluid pipes from the output faces of all your extractors to the input face (Blue) of the Fractionating Still.

    Tip: If your fluid pipes have built-in extraction motors, you do not need to enable Auto-Output on the Arboreal Extractors, though turning it on ensures instant fluid transfer.

  4. 4Set Up the Compression Dynamos and Water Cooling

    Place your Compression Dynamos near the Fractionating Still, ensuring their red excitation coils point toward where your power cables will go. Compression Dynamos require both a liquid fuel and a coolant to run. Place an Aqueous Accumulator nearby with two water source blocks adjacent to its sides so it generates infinite water, then pipe that water directly into the Compression Dynamos.

    Tip: Check the dynamo's internal tanks to verify that the water tank is completely full before introducing any fuel.

  5. 5Pipe Tree Oil and Manage the Rosin Byproduct

    Configure the Fractionating Still's sides: set one side to Blue to accept Resin, one side to Orange to output refined Tree Oil, and another side to output the solid byproduct, Rosin. Run a fluid pipe from the Still's fluid output into your Compression Dynamos. Crucially, you must also attach an item pipe or a chest adjacent to the Still's item output face to collect the Rosin; if the internal item slot fills up with Rosin, the Still will jam and stop making fuel.

    Tip: Rosin acts as a solid fuel equivalent to coal! You can route it into a Stirling Dynamo for bonus RF, or use it to craft torches and sticky pistons.

  6. 6Close the Loop and Jumpstart the System

    Run RF energy cables from the active coil ends of your Compression Dynamos back to the Fractionating Still, and branch that same power line out to a Redstone Flux Cell to store excess energy for your base. Because the Fractionating Still needs power to make the very fuel that runs the dynamos, the system starts dead. Temporarily drop a bucket of Tree Oil, Creosote, or another compatible liquid fuel (check JEI for valid fuels) into the Dynamo—or place a temporary Stirling Dynamo burning coal next to the Still—to kick-start the refining process.

  7. 7Upgrade and Scale the Plant

    Once the Fractionating Still refines its first batch of Tree Oil, the Compression Dynamos will kick on, powering the Still and netting you a steady surplus of RF. Watch the fluid levels in the Fractionating Still and the Dynamos for a few minutes. If the Still is backed up with Resin, insert a Hardened or Reinforced Integral Component into it to speed up refining; if you have excess Tree Oil, add another Compression Dynamo or upgrade your existing ones.

    Tip: Installing Fuel Catalyzer augments in your Compression Dynamos stretches each millibucket of Tree Oil much further, drastically increasing your net energy gain.

How it works

The magic of this setup lies in thermodynamic net-positive processing. The Arboreal Extractor is a completely passive machine that requires zero RF to operate. As long as it is attached to the base of a valid, naturally generated tree (meaning the log is connected to natural leaves that were grown from a sapling), it continuously generates Resin out of thin air.

The Fractionating Still is the only machine in the chain that consumes RF. It heats and separates raw Resin into two components: liquid Tree Oil and solid Rosin. However, the energy required by the Still to refine a batch of Tree Oil is only a small fraction of the energy that the resulting Tree Oil produces when burned inside a Compression Dynamo.

By looping a minor portion of the Dynamo's RF output back into the Fractionating Still, the power plant sustains its own fuel production indefinitely. Combined with passive water generation from an Aqueous Accumulator for dynamo coolant, the entire factory runs forever with zero player intervention.

Common mistakes

  • Building artificial trees: Placing logs and leaf blocks by hand will not work. The Arboreal Extractor checks for a genuine tree structure grown from a sapling. If you accidentally break too many leaves on your grown tree, the extractor will stop functioning.
  • Ignoring the Rosin byproduct: The Fractionating Still produces solid Rosin alongside Tree Oil. If you do not automatically pull the Rosin out into a chest, drawer, or trash can, the Still's internal inventory will hit 64 items and halt all fuel production, causing a total base blackout.
  • Wrong side configuration: Thermal Expansion machines rely heavily on their colored I/O system. If fluid isn't moving, open the machine's Configuration tab and verify that Blue sides face input pipes, Orange sides face output pipes, and the Auto-Output toggle (the arrow icon with a gear) is actually turned on.
  • Running Dynamos without a buffer or control: By default, Dynamos may continue burning fuel slowly even when their internal RF buffer is full. Connect them to a Redstone Flux Cell, or install an Excitation Field Limiter augment inside the Dynamos so they automatically throttle down and save Tree Oil when your base doesn't need power.

FAQ

Why is my Arboreal Extractor producing Sap or Latex instead of Resin?

Different tree species yield different fluids depending on your Minecraft version and modpack configuration. In modern Thermal Series (1.16+), Spruce typically yields Resin, Oak yields Sap, and Jungle or Rubber trees yield Latex. Always check the Arboreal Extractor recipes in JEI to see which sapling produces Resin in your pack.

How many Arboreal Extractors do I need per Fractionating Still?

At base speed with no upgrades, four to six Arboreal Extractors on a single tree will comfortably keep one Fractionating Still running continuously, which in turn can easily feed one or two base-level Compression Dynamos.

Can I put multiple Arboreal Extractors on the same tree?

Yes! You can place up to four extractors around the bottom block of a standard 1x1 tree trunk (one on each cardinal side). Doing this does not divide their output; each extractor operates at full speed.

What can I do with all the leftover Rosin?

Never throw Rosin away early on! It is an excellent solid fuel that can be burned in a Stirling Dynamo for even more RF, used in furnaces in place of coal, or used as a substitute for slimeballs when crafting sticky pistons and leads.

By combining passive Resin harvesting from Arboreal Extractors with the refining power of a Fractionating Still, you now have an easily scalable, closed-loop Tree Oil power plant that provides endless RF for your mid-game base.

More Thermal Expansion guides

Thermal Expansion · Getting startedThermal Expansion Getting Started Guide: First Machines and OresThis guide will walk you through setting up your first automated ore-processing line using Thermal Expansion. By transitioning from vanilla furnaces to powered machines, you will double your metal yield from raw ores and establish a scalable power grid for future automation.Beginner8 steps
Thermal Expansion · ExplainedThermal Machine Configuration & Blue/Orange I/O Logic ExplainedMastering the internal side configuration of Thermal Expansion machines is the key to building clean, pipe-free automated processing lines. In this guide, you will learn how to use the iconic Blue and Orange input/output logic, enable automatic item movement, and control your machines with Redstone.Beginner7 steps
Thermal Expansion · Setup guideHow to Build an Automated Ore Processing Line in Thermal ExpansionMoving beyond basic one-to-one furnace smelting is essential for progressing through modded Minecraft without constantly running out of raw resources. In this guide, you will learn how to build an automated Thermal Expansion processing line that chains a Pulverizer, Redstone Furnace, and Induction Smelter together. This setup automatically doubles common ores and uses generated byproducts like Rich Slag and Cinnabar to triple your rarest minerals.Intermediate8 steps
Thermal Expansion · PowerThermal Expansion Power Guide: Best Dynamos and RF Generation SetupsMastering energy generation in Thermal Expansion is the key to transitioning from manual ore processing to a fully automated factory. This guide compares the five main Dynamos, explains how to scale their Redstone Flux (RF) output using augments, and details how to build an efficient power buffer with Redstone Flux Cells. By the end, you will know exactly which generator fits your current resource pool and how to prevent energy loss.Intermediate8 steps
Thermal Expansion · ProgressionThermal Progression Guide: Integral Components, Upgrade Kits, and AugmentsMastering the progression system in Thermal Expansion allows you to transform sluggish, basic machines into high-speed industrial powerhouses. In this guide, you will learn how to smelt the three core advanced alloys, scale your machinery from Hardened to Resonant tiers using Integral Components, and customize individual machine behaviors with specialized Augments.Intermediate8 steps
Thermal Expansion · Setup guideFluid Processing & Advanced Alloying Setup: Magma Crucible and Fluid EncapsulatorIn this guide, you will build a seamless fluid processing and infusing pipeline using the Magma Crucible and Fluid Encapsulator from Thermal Expansion. Mastering this setup is essential for melting down raw materials like Redstone, Glowstone, and Ender Pearls to automate high-tier crafting components and prepare resources for advanced alloys like Signalum, Lumium, and Enderium.Intermediate7 steps