Thermal Expansion · Setup guide · Intermediate
How to Build an Automated Ore Processing Line in Thermal Expansion
Moving beyond basic one-to-one furnace smelting is essential for progressing through modded Minecraft without constantly running out of raw resources. In this guide, you will learn how to build an automated Thermal Expansion processing line that chains a Pulverizer, Redstone Furnace, and Induction Smelter together. This setup automatically doubles common ores and uses generated byproducts like Rich Slag and Cinnabar to triple your rarest minerals.
What you need
- 1x Pulverizer
- 1x Redstone Furnace
- 1x Induction Smelter
- 2x to 3x Chests, Barrels, or Storage Drawers (for input, output, and byproduct routing)
- 1x Crescent Hammer (optional, for rotating and dismantling machines)
- A reliable Redstone Flux (RF) or Forge Energy (FE) power source and energy cables (such as Stirling Dynamos or Fluxducts)
- Integral Components (Hardened, Reinforced, or Signalum) and Auxiliary Process Sieves (optional, to boost speed and secondary outputs)
- Sand, Flint, or Cinnabar (for catalysts and induction reagents)
Step by step
1Place Your Core Processing Line
Find a flat area near your base's power grid and place the Pulverizer on the left, the Redstone Furnace directly touching it in the middle, and your output Chest on the right of the Redstone Furnace. Place an input Chest directly on top of the Pulverizer to hold your raw ores. Leave one block of space near the Pulverizer or output chest to place your Induction Smelter for the advanced tripling branch.
Tip: Thermal Expansion machines can push and pull items directly into adjacent inventories without needing external item pipes!
2Connect Power to All Machines
Run your energy cables along the back or bottom of the Pulverizer, Redstone Furnace, and Induction Smelter. Verify that each machine is receiving power by right-clicking them and checking the vertical energy bar on the left side of the GUI. Make sure your dynamos or energy cells can sustain all three machines running simultaneously.
Tip: Machines consume more power per tick when upgraded with Integral Components, so upgrade your power generation alongside your machines.
3Configure the Pulverizer for Ore Doubling
Open the Pulverizer's interface and click the gear icon on the right to open the Configuration tab. Click the top face on the 3D machine model until it turns Blue (Input), and click the right face—the one touching the Redstone Furnace—until it turns Orange (Output). Finally, click the 'Auto-Input' and 'Auto-Output' buttons on the left side of the Configuration tab so they highlight as active.
Tip: In newer versions of Thermal Expansion (1.16+), you can add Flint or Basalz Powder into the Pulverizer's bottom catalyst slot to dramatically increase secondary byproduct chances.
4Configure the Redstone Furnace for Auto-Smelting
Open the Redstone Furnace and navigate to its Configuration tab. Set the left face (touching the Pulverizer) to Blue (Input) and the right face (touching your output Chest) to Orange (Output). Enable both 'Auto-Input' and 'Auto-Output' so the furnace automatically pulls pulverized dust and pushes finished ingots into the chest.
Tip: You actually only need one machine at a connection point to push or pull, but enabling both ensures smooth transfers without bottlenecks.
5Route Secondary Byproducts and Cinnabar
Pulverizing ores often yields valuable secondary dusts (like Silver from Lead, or Cinnabar from Redstone and Gold) that can clog your furnace if not managed. If you want to isolate secondary outputs in older versions (1.12.2), set the bottom face of the Pulverizer to Yellow (Secondary Output) and place a chest underneath; in newer versions (1.16+), standard Orange outputs push all slots, so let the Redstone Furnace smelt the bonus metal dusts while pulling non-smeltable Cinnabar out into a dedicated filter or chest.
Tip: Check JEI for your specific Minecraft version to see which ores produce Cinnabar when pulverized—Redstone Ore and Gold Ore are your best sources.
6Set Up the Induction Smelter for Rich Slag
Place your Induction Smelter next to your output area and connect it to power. Inside the Induction Smelter, combine common raw ores with regular Sand. This process smelts the ore into ingots while giving you a scaling percentage chance to generate Rich Slag as a secondary byproduct.
Tip: Keep a dedicated barrel or drawer of Sand feeding into the Induction Smelter so you always have a steady stockpile of Rich Slag accumulating in the background.
7Triple Your Rare Ores
Instead of putting your rarest raw ores (such as Diamond, Emerald, Platinum, or Tin/Nickel depending on your modpack needs) into the Pulverizer chest, feed them into the Induction Smelter along with the Rich Slag or Cinnabar you collected earlier. One raw ore combined with one Rich Slag or Cinnabar yields three ingots (or extra gems) along with a high chance for bonus secondary dust. Configure the Induction Smelter's output face to Orange to push these tripled ingots straight into your main output chest.
Tip: Cinnabar typically guarantees a 100% chance of a secondary metal byproduct in addition to tripling the primary ore, making it the ultimate reagent for rare resources.
8Install Upgrades and Augmentations
Open the Augmentation tab (the plus-sign icon) on each machine to install upgrades. Insert your highest-tier Integral Component (or Upgrade Kit in 1.12.2) to multiply processing speed and energy storage. Next, install Auxiliary Process Sieves inside the Pulverizer and Induction Smelter to significantly boost the drop rate of Rich Slag, Cinnabar, and bonus metal dusts.
Tip: Avoid putting Auxiliary Process Sieves in the Redstone Furnace, as basic dust smelting has no secondary output and the augment will simply waste power.
How it works
Thermal Expansion's automation relies on two core mechanics: internal side reconfiguration and auto-ejection. Inside every machine's Configuration tab, the 3D block representation corresponds to the actual faces of the block in the world. By painting a face Blue (Input) or Orange (Output) and toggling the Auto-Input/Auto-Output controls, the machine acts as its own item pipe, actively pulling items from adjacent inventories and pushing completed crafts into the next block in the chain.
The resource multiplication logic works as a two-stage feedback loop. First, the Pulverizer crushes 1 raw ore into 2 pulverized dusts (plus a small percentage chance for a related secondary dust or Cinnabar), which the Redstone Furnace smelts at a 1:1 ratio for simple ore doubling.
Second, the Induction Smelter acts as a metallurgical multiplier. By smelting common ores with Sand, it produces Rich Slag as a byproduct. When you feed that Rich Slag (or Cinnabar from the Pulverizer) back into the Induction Smelter alongside a rare ore, the reagent increases the base yield from 2 ingots to 3 ingots per ore. Installing Auxiliary Process Sieves shifts the math even further in your favor, making your factory generate almost enough Rich Slag and Cinnabar to sustain continuous ore tripling.
Common mistakes
- Forgetting to enable the Auto-Input and Auto-Output toggles: Setting the machine sides to Blue and Orange only opens the item slots to that face; the machine will not actually push or pull items on its own until you click the Auto-Input and Auto-Output buttons on the left side of the Configuration tab.
- Clogging the Pulverizer with un-ejectable items: If the Redstone Furnace's input slot fills up with one type of dust while the Pulverizer finishes a different ore, or if a non-smeltable byproduct like Cinnabar gets stuck, the Pulverizer will halt. Always ensure the output chest has plenty of room, or place an intermediary buffer chest with filtered pipes between machines for massive mining hauls.
- Confusing machine orientation in the GUI: In the Configuration tab, the center face of the diagram always represents the front of the machine (the side with the machine's face texture). If your items aren't transferring into the adjacent block, double-check which physical direction the machine is facing.
- Sending every single ore into the Induction Smelter with Rich Slag: Rich Slag and Cinnabar are generated at a partial percentage rate per craft. If you waste them on ultra-common ores like Copper or Iron, you will run out when you actually need to triple rare materials like Gold, Diamond, or Netherite scrap.
FAQ
Why are my machines not transferring items even though the sides are set to Blue and Orange?
Check two things: first, verify that the Auto-Input and Auto-Output buttons (located next to the 3D block layout in the Configuration tab) are clicked and lit up. Second, ensure the machine's Redstone Control tab is set to 'Ignored' rather than waiting for a high or low redstone signal.
What is the difference between using Rich Slag and Cinnabar in the Induction Smelter?
Both items will triple the primary output of most raw ores in the Induction Smelter (yielding 3 ingots instead of 2). However, Cinnabar provides a dramatically higher—often guaranteed—chance to also produce the ore's secondary metal byproduct, whereas Rich Slag gives a more modest secondary chance.
Do I need item pipes or ducts from another mod to build this setup?
No! Because Thermal Expansion machines have built-in Auto-Input and Auto-Output capabilities, placing the machines and chests directly adjacent to one another allows them to pass items back and forth with zero pipes required.
How do I unlock the augment slots inside my machines?
In modern Minecraft versions (1.16+), all augment slots are open by default, and you boost base stats by placing an Integral Component in the dedicated top-right upgrade slot. In older versions (1.12.2), you must first upgrade the machine's tier using Hardened, Reinforced, Signalum, and Resonant Upgrade Kits or Conversion Kits to unlock additional augment slots.
By chaining a Pulverizer, Redstone Furnace, and Induction Smelter using Thermal Expansion's built-in side configuration, you now have a compact, pipe-free factory that automatically doubles bulk ores and recycles slag and Cinnabar to triple your rarest minerals.