Thermal Expansion · Power · Intermediate
Thermal Expansion Power Guide: Best Dynamos and RF Generation Setups
Mastering energy generation in Thermal Expansion is the key to transitioning from manual ore processing to a fully automated factory. This guide compares the five main Dynamos, explains how to scale their Redstone Flux (RF) output using augments, and details how to build an efficient power buffer with Redstone Flux Cells. By the end, you will know exactly which generator fits your current resource pool and how to prevent energy loss.
What you need
- Crescent Hammer (for rotating dynamos and configuring cells)
- Raw metals (Iron, Copper, Gold, Lead, Tin, Silver, Nickel) and Redstone
- Redstone Flux Coil (required for all Dynamos) and Redstone Conductance Coil
- Tinker's Workbench (optional, for recharging items and installing components)
- Hardened, Reinforced, and Resonant Integral Components
- Energy cables or conduits from a compatible logistics mod
Step by step
1Start with the Stirling Dynamo for Early Power
Craft a Stirling Dynamo using a Redstone Flux Coil, Iron Gear, stone, and iron ingots. Place it directly against your early-game machines (like the Pulverizer or Redstone Furnace), ensuring the red excitation coil points directly into the machine. Feed it any standard furnace fuel such as Coal, Charcoal, or Blocks of Coal to immediately begin generating baseline Redstone Flux.
Tip: Blocks of Coal provide a full ten times the energy of a single coal piece, making them more efficient than nine separate pieces.
2Harness Nether Lava with the Magmatic Dynamo
Once you have Invar Ingots (made by alloying Iron and Nickel), craft a Magmatic Dynamo to move away from solid fuels. Pump Lava from the Nether or a local lava lake directly into the dynamo to generate steady power. Because it accepts fluids through any face except the red coil, you can easily automate a bank of Magmatic Dynamos with a single fluid pipe line.
Tip: Check JEI for exact RF values per bucket of lava, as modpacks frequently tweak fluid fuel values.
3Automate Renewable Bio-Power with the Compression Dynamo
For a completely self-sustaining mid-game setup, build a Compression Dynamo, which requires BOTH a liquid fuel and a liquid coolant (typically Water) to operate. Pair it with an Arboreal Extractor attached to living trees to harvest Resin, then refine that Resin into Tree Oil using a Fractionating Still. Pipe the Tree Oil and Water into the Compression Dynamo for an infinite, passive RF loop.
Tip: If you find Crude Oil in the world, refining it into Refined Fuel yields drastically higher total RF in a Compression Dynamo than Tree Oil.
4Burn Excess Gems and Metals in Lapidary and Numismatic Dynamos
When your automated mining setups produce surplus minerals, transition to specialized generators. Craft a Lapidary Dynamo (using Lapis Lazuli and Signalum/Diamonds depending on your exact game version) to burn Diamonds, Emeralds, Prismarine, and Quartz directly into massive bursts of RF. Alternatively, craft a Numismatic Dynamo and feed your extra metal ingots into a Multiservo Press with a Coin Die to mint Coins, turning excess Gold, Silver, or Enderium into dense energy packets.
Tip: Check the Dynamo tabs in JEI to see which specific gems or coins offer the highest total RF yield in your current modpack.
5Scale Output Using Integral Components
A stock dynamo produces a modest amount of RF/t, which will bottleneck a growing base. Craft Hardened, Reinforced, or Resonant Integral Components using increasingly advanced alloys (Invar, Electrum, Signalum, and Enderium). Right-click the dynamo to open its GUI, click the Augmentation tab on the right, and insert the Integral Component into the top slot to multiply both its maximum RF/t output and its fuel consumption speed.
Tip: An Integral Component does not waste fuel; it simply burns through the fuel faster to deliver higher RF per tick.
6Specialize with Auxiliary Coils and Chambers
Fill the remaining augment slots to tailor the dynamo to your base's needs. Install Auxiliary Reaction Chambers to increase the maximum generation rate even further, or install Multi-Cycle Injectors to increase fuel efficiency so each piece of coal or bucket of lava produces more total RF. You can mix and match speed and efficiency augments depending on whether you are short on fuel or short on power per tick.
Tip: Avoid stacking only speed augments without upgrading your fuel supply line, or the dynamo will starve and stutter.
7Buffer Your Grid with a Redstone Flux Cell
Craft a Redstone Flux Cell using a Redstone Conductance Coil, Lead, and Glass to store excess energy instead of letting your dynamos idle. Place the Flux Cell between your dynamo bank and your machine line. Open the Cell's GUI, go to the Configuration tab, and set the side facing your dynamos to Blue (Input) and the side facing your machines or cables to Orange (Output).
Tip: You can shift-click the center button in the Configuration tab to clear all sides at once before setting up your inputs and outputs.
8Prevent Fuel Waste with Redstone Control
Dynamos will continue burning their current unit of fuel even if their internal buffer and the attached Flux Cell are completely full, slowly bleeding energy. To prevent this, craft a Redstone Excitation Limiter augment (or use the built-in Redstone Control tab if available in your version/setup) to make the dynamo stop generating the exact tick its buffer fills up. You can also attach a Vanilla Comparator to your Redstone Flux Cell to automatically shut off the dynamos via redstone signal when storage reaches full capacity.
Tip: Installing a Higher-Tier Integral Component in a Redstone Flux Cell increases both its total RF capacity and its maximum input/output transfer rates.
How it works
Dynamos in Thermal Expansion operate on a demand-driven throttling curve. Every dynamo has an internal RF buffer. When that buffer is empty—meaning your machines or Flux Cells are actively pulling all available power—the dynamo runs at 100% speed and maximum RF/t output. As the internal buffer fills up because demand drops, the dynamo automatically throttles down its generation rate (and fuel consumption rate) down to a minimum threshold (typically 10% of its maximum rate).
However, a dynamo cannot stop burning a piece of fuel mid-operation without losing heat, and without specific augments or redstone shutoffs, it will still trickle-burn fuel at that minimum 10% rate even when completely full. This is why pairing dynamos with a Redstone Flux Cell is essential: the Cell acts as a massive sponge that absorbs 100% of the dynamo's output during active cycles, allowing you to use redstone control to cleanly turn the dynamos completely off once the Cell is full.
Augmentation works through a dual-modifier system: base multipliers and additive modifiers. The Integral Component applies a base multiplier to the dynamo's maximum RF/t output without altering the total RF extracted from a given fuel item. Secondary augments (like Auxiliary Reaction Chambers or Multi-Cycle Injectors) add percentage modifiers to either generation speed or total fuel energy value, letting you balance high-burst factory setups against long-lasting passive power grids.
Common mistakes
- Pointing the dynamo coil the wrong way: Dynamos ONLY output RF from the projecting red coil end and ONLY accept items/fluids through the wider base faces. Use a Crescent Hammer to right-click and rotate the dynamo if the coil is not facing your cable or Flux Cell.
- Installing multiple Integral Components: Only the highest-tier Integral Component placed in a dynamo or Flux Cell takes effect. Do not waste resources putting both a Hardened and a Reinforced Integral Component into the same machine.
- Forgetting coolant in the Compression Dynamo: Unlike the Magmatic Dynamo, the Compression Dynamo will refuse to run—even when full of Tree Oil or Refined Fuel—if its secondary tank does not have Water or another valid coolant.
- Bottlenecking a dynamo bank with an un-upgraded Flux Cell: A stock Redstone Flux Cell has a limited input/output transfer limit. If you connect ten augmented dynamos to a basic Cell without putting an Integral Component inside the Cell itself, your power grid will be throttled by the Cell's default transfer cap.
FAQ
Which Dynamo is the best overall for mid-to-late game?
The Compression Dynamo running on Refined Fuel (or automated Tree Oil) and the Lapidary Dynamo running on automated Emeralds (from mob farms or villagers) are generally the strongest, as they combine high base RF/t with easily renewable fuels.
How do I pick up a Dynamo or Redstone Flux Cell without losing its stored power and augments?
Hold Sneak (Shift) and right-click the Dynamo or Flux Cell with a Crescent Hammer. It will drop immediately as an item while retaining its internal fluids, stored RF, side configurations, and installed augments.
Why is my Redstone Flux Cell not sending power to my machines?
Open the Redstone Flux Cell GUI and check two things: first, ensure the side touching the machine or power cable is set to Orange (Output) in the Configuration tab; second, verify the output transfer slider on the main GUI screen isn't set to 0 RF/t.
Can I connect Dynamos directly to each other in a chain?
No, Dynamos cannot pass power through one another. Each Dynamo's red excitation coil must connect directly to an energy-consuming machine, a Redstone Flux Cell, or a compatible energy cable.
By matching the right Thermal Expansion Dynamo to your available resources, scaling its output with Integral Components, and buffering the grid through a properly configured Redstone Flux Cell, you can build a lag-free, zero-waste RF power plant for any stage of your modded world.