Thermal Expansion · Getting started · Beginner

Thermal Expansion Getting Started Guide: First Machines and Ores

This guide will walk you through setting up your first automated ore-processing line using Thermal Expansion. By transitioning from vanilla furnaces to powered machines, you will double your metal yield from raw ores and establish a scalable power grid for future automation.

What you need

  • Iron Pickaxe or better for mining modded ores
  • Basic vanilla resources: Iron, Copper, Redstone, Gold, Cobblestone, Glass, and Bricks
  • Thermal Foundation ores: Tin, Lead, Silver, and Nickel
  • A solid fuel source such as Coal, Charcoal, or Wooden Planks
  • JEI (Just Enough Items) or the in-game Thermalpedia for checking exact crafting recipes

Step by step

  1. 1Mine Thermal Foundation Ores

    Head underground with an Iron Pickaxe and gather the new ores added by Thermal Foundation, specifically Tin, Silver, Lead, and Nickel, alongside plenty of vanilla Copper, Iron, and Redstone. Smelt a small initial batch of Iron, Copper, and Tin in a vanilla Furnace so you have enough ingots to build your first components. Save the rest of your raw ores in a chest, as you will process them much more efficiently once your machines are running.

    Tip: Tin is normally found at higher elevations similar to Copper, while Silver, Lead, and Nickel generate deeper underground.

  2. 2Craft the Crescent Hammer

    Open your Crafting Table and combine Iron Ingots with a Tin Ingot in a wrench-like Y-shape to craft the Crescent Hammer. This tool is essential for managing Thermal Series blocks. Right-clicking a machine or dynamo with the Crescent Hammer rotates its orientation, while Shift-Right-Clicking instantly dismantles and picks up the block while preserving its internal power and inventory.

    Tip: Never break Thermal machines with a regular pickaxe if you want them to keep their stored Redstone Flux (RF) and configuration settings.

  3. 3Assemble Gears and Redstone Reception Coils

    Before making machines, you need intermediate mechanical parts. Craft a few Copper Gears and Iron Gears by placing four ingots of the same metal in a diamond shape around a central Iron Nugget. Next, craft two Redstone Reception Coils and one Redstone Transmission Coil by placing Redstone Dust on opposite sides of a Gold Ingot (or Silver Ingot, depending on the coil type). Check JEI for the exact diagonal arrangement, as Reception Coils go into machines while Transmission Coils go into dynamos.

    Tip: Craft these components in small batches, as almost every Thermal Expansion block requires at least one coil and two gears.

  4. 4Build and Place the Stirling Dynamo

    Craft a Stirling Dynamo using a Redstone Transmission Coil, Iron Gears, Stone or Cobblestone, Redstone, and an Iron Ingot. Place the dynamo on the floor of your base. Notice the protruding red coil on one side of the block; this coil must point directly into the machine or energy cable you wish to power.

    Tip: If the red excitation coil is pointing the wrong way, right-click the Stirling Dynamo with your Crescent Hammer to rotate it.

  5. 5Craft the Machine Frames

    Craft two Machine Frames by placing Tin Gears in the center of a Crafting Table surrounded by Iron Ingots and Glass blocks. Machine Frames act as the structural chassis for all Thermal Expansion processing blocks. Having two frames ready allows you to immediately build both your ore crusher and your powered smelter.

  6. 6Craft and Connect the Pulverizer

    Combine one Machine Frame with a Piston, Flint, Copper Gears, and a Redstone Reception Coil to create a Pulverizer. Place the Pulverizer directly against the red coil face of your Stirling Dynamo. Open the Stirling Dynamo's interface and insert Coal or Charcoal into its fuel slot; you will see flames ignite and the energy bar inside both the dynamo and the Pulverizer begin to fill with Redstone Flux (RF).

    Tip: The Pulverizer crushes raw ores into two piles of metal dust, effectively doubling your ingot production while occasionally yielding bonus secondary dusts.

  7. 7Craft and Align the Redstone Furnace

    Craft a Redstone Furnace using your second Machine Frame, Bricks, Copper Gears, Redstone, and a Redstone Reception Coil. Place the Redstone Furnace directly to the left or right of the Pulverizer. So that both machines receive power without needing external cables right away, you can either place the Stirling Dynamo between them (using a compatible energy conduit if installed) or temporarily move the dynamo to power whichever machine you are currently using.

    Tip: If you have an energy storage block like a Redstone Flux Cell or energy ducts from companion mods, place them behind both machines to power them simultaneously from one dynamo.

  8. 8Configure Auto-Input and Auto-Output Sides

    Right-click the Pulverizer to open its GUI and click the gear icon on the right side to open the Configuration tab. Here you will see a 3D representation of the machine's faces: click the face touching the Redstone Furnace until it turns Orange (Output), and ensure the Auto-Output button on the left is enabled. Next, open the Redstone Furnace's Configuration tab and click the face touching the Pulverizer until it turns Blue (Input), enabling Auto-Input. Place your remaining raw ores into the Pulverizer; it will now crush them into dust and automatically push the dust into the Redstone Furnace to be smelted into ingots.

    Tip: A Purple or Blue/Orange split border on a machine face means it can both accept inputs and eject outputs through that same side.

How it works

Thermal Expansion runs on a unified energy system known as Redstone Flux (RF), which seamlessly integrates with Forge Energy (FE). Energy is produced by generators called Dynamos. The Stirling Dynamo operates on the same logic as a vanilla furnace—burning solid items like coal or wood—but instead of cooking food, it converts that burn time into RF and pushes it exclusively out of its narrow red coil.

Machines use this RF to perform work faster and more efficiently than vanilla blocks. The core logic of early-game ore doubling relies on separating crushing from smelting. Because the Pulverizer breaks one raw ore into two pulverized dusts, and the Redstone Furnace smelts each dust into one full ingot, chaining them together doubles your yield for every ore mined while occasionally generating bonus secondary byproducts (such as Silver dust when pulverizing Lead).

Automation between adjacent machines works without extra pipes thanks to Thermal Expansion's built-in side reconfiguration logic. Every machine has an internal transfer pump controlled by the Configuration tab. When a side is painted Blue, it opens the input slot to adjacent inventories; when painted Orange with Auto-Output enabled, the machine actively pushes completed items out of that face into whatever valid container or machine sits next to it.

Common mistakes

  • Smelting all your raw ores in a vanilla furnace before building the Pulverizer, which permanently wastes half of your potential metal ingots and prevents you from getting secondary byproduct dusts.
  • Confusing Redstone Reception Coils with Redstone Transmission Coils during crafting; remember that Dynamos transmit power (Silver/Gold Transmission Coil) while Machines receive power (Gold Reception Coil).
  • Pointing the Stirling Dynamo's thick base toward a machine instead of its narrow red coil; dynamos only output energy from the red coil end.
  • Forgetting to click the 'Auto-Output' toggle button inside the machine's Configuration tab after coloring the side Orange, which leaves finished items stuck inside the output slots.
  • Leaving a Stirling Dynamo burning fuel when no machines are working; while newer dynamos throttle down their consumption, they can still slowly trickle fuel if the internal buffer isn't completely full.

FAQ

Why isn't my Pulverizer pushing dust into the Redstone Furnace?

Check three things in the Configuration tab: the Pulverizer's side facing the furnace must be Orange (Output), the Pulverizer's Auto-Output button must be toggled on, and the Redstone Furnace's side facing the Pulverizer must be set to Blue (Input).

How do I speed up my Thermal Expansion machines?

You need to upgrade their tier by crafting Integral Components (starting with Hardened Integral Components made with Invar) and placing them in the machine's Augmentation tab, along with Flux Linkage Amplifiers.

How do I make Invar, Electrum, and Bronze?

Once you have a Pulverizer, crush pure metals into dust and combine them in a crafting grid: two Iron Dust and one Nickel Dust make Invar Blend; one Gold and one Silver make Electrum Blend; three Copper and one Tin make Bronze Blend. Smelt the blends in your Redstone Furnace.

Can I power multiple machines with one Stirling Dynamo?

A single dynamo only touches one block face with its coil, so to power multiple machines at once you will need to connect the dynamo to an Energy Cell or use energy transfer cables from another module or compatible mod.

With a Crescent Hammer in hand and a Stirling Dynamo powering an auto-ejecting Pulverizer and Redstone Furnace setup, you now have an automated ore-doubling facility ready to fuel your climb up the Thermal Expansion tech tree.

More Thermal Expansion guides

Thermal Expansion · ExplainedThermal Machine Configuration & Blue/Orange I/O Logic ExplainedMastering the internal side configuration of Thermal Expansion machines is the key to building clean, pipe-free automated processing lines. In this guide, you will learn how to use the iconic Blue and Orange input/output logic, enable automatic item movement, and control your machines with Redstone.Beginner7 steps
Thermal Expansion · Setup guideHow to Build an Automated Ore Processing Line in Thermal ExpansionMoving beyond basic one-to-one furnace smelting is essential for progressing through modded Minecraft without constantly running out of raw resources. In this guide, you will learn how to build an automated Thermal Expansion processing line that chains a Pulverizer, Redstone Furnace, and Induction Smelter together. This setup automatically doubles common ores and uses generated byproducts like Rich Slag and Cinnabar to triple your rarest minerals.Intermediate8 steps
Thermal Expansion · PowerThermal Expansion Power Guide: Best Dynamos and RF Generation SetupsMastering energy generation in Thermal Expansion is the key to transitioning from manual ore processing to a fully automated factory. This guide compares the five main Dynamos, explains how to scale their Redstone Flux (RF) output using augments, and details how to build an efficient power buffer with Redstone Flux Cells. By the end, you will know exactly which generator fits your current resource pool and how to prevent energy loss.Intermediate8 steps
Thermal Expansion · ProgressionThermal Progression Guide: Integral Components, Upgrade Kits, and AugmentsMastering the progression system in Thermal Expansion allows you to transform sluggish, basic machines into high-speed industrial powerhouses. In this guide, you will learn how to smelt the three core advanced alloys, scale your machinery from Hardened to Resonant tiers using Integral Components, and customize individual machine behaviors with specialized Augments.Intermediate8 steps
Thermal Expansion · PowerHow to Build a Self-Sustaining Tree Oil Power PlantRunning out of coal and lava is a constant struggle in early-to-mid modded Minecraft, making a renewable power source essential for automation. This guide will walk you through building a self-sustaining Tree Oil power plant using Thermal Expansion machines. Once built, this closed-loop system generates passive, infinite Redstone Flux (RF) without requiring any complex farming machinery or manual fuel gathering.Intermediate7 steps
Thermal Expansion · Setup guideFluid Processing & Advanced Alloying Setup: Magma Crucible and Fluid EncapsulatorIn this guide, you will build a seamless fluid processing and infusing pipeline using the Magma Crucible and Fluid Encapsulator from Thermal Expansion. Mastering this setup is essential for melting down raw materials like Redstone, Glowstone, and Ender Pearls to automate high-tier crafting components and prepare resources for advanced alloys like Signalum, Lumium, and Enderium.Intermediate7 steps