Powah! (Rearchitected) · End game
Powah: Overcharged Hyper-Reactor & KubeJS Factory
The Overcharged Hyper-Reactor & KubeJS Factory is an endgame megastructure designed to automate custom, high-cost energizing recipes while generating millions of FE/t. By pairing an array of Nitro-to-Overcharged Reactors with a multi-laser Energizing Orb matrix, this setup breezes through the deepest power bottlenecks of expert modpacks. Build this when your standard Nitro power grid can no longer sustain massive KubeJS crafting loops or ultimate-tier multidimensional machinery.
- Footprint
- 15x15x9 blocks
- Power
- Generates 2M+ FE/t (check JEI for exact Overcharged pack configs); consumes up to 1.5M FE/t during peak energizing
- Throughput
- 1-4 high-tier custom energized crafts per second
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Reactor (Nitro or Overcharged) | 144 |
| Energizing Orb | 4 |
| Energizing Rod (Nitro or Overcharged) | 64 |
| Energy Cable (Nitro or Overcharged) | 120 |
| Ender Cell (Nitro or Overcharged) | 2 |
| Ender Gate (Nitro or Overcharged) | 16 |
| Energy Cell (Nitro) | 8 |
| Redstone Comparator | 4 |
| Hopper | 8 |
| Chest | 6 |
| Block of Uraninite | 64 |
| Blue Ice or Dry Ice | 64 |
Build it step by step
1Construct the Quad-Reactor Foundation
Clear a 15x15x9 area and mark four 3x4 footprints in the corners for your Reactors. Hold 36 Reactor blocks (Nitro or Overcharged tier, depending on your modpack's KubeJS extensions) in your main hand and right-click the center block of each footprint to automatically assemble the four 3x4x3 multiblock reactors. Leave at least a 3-block gap between each reactor for cabling and coolant routing.
2Plumb Fuel, Buffer, and Solid Coolant
Connect a fluid pump and pipes to feed a constant stream of Water into the base of all four Reactors. Route item logistics from your Fuel & Catalyst Chest into the reactors to supply Uraninite, Redstone, Coal, and Dry Ice (or Blue Ice). Ensure Auto-Mode is toggled OFF in the Reactor GUIs so they run continuously at maximum saturation.
3Establish the Ender Cell Spine
Place your Ender Cells near the reactors and link them to Channel 1. Shift-right-click your highest-tier Energy Cells into the Ender Cell GUI to expand the channel's maximum FE buffer capacity into the billions. Attach Energy Cables to the power output faces of the four Reactors and feed them directly into the Ender Cells.
4Build the Energizing Orb Platform
In the center of the room, construct a raised 7x7 platform at eye level and place four Energizing Orbs spaced two blocks apart. This central location ensures all surrounding lasers have a clean line of sight and stay well within the maximum linking range of the orbs.
5Install the Overhead Rod Canopy
Two blocks above the platform, lay a dense grid of 64 Energizing Rods facing downward, held aloft by a framework of Energy Cables connected to your Ender Cell network (or fitted directly with Ender Gates). Dividing 64 rods among 4 orbs yields 16 high-tier rods per orb, allowing you to inject millions of FE per tick into massive KubeJS recipes.
6Link Rods to Orbs
Craft a Wrench and configure it to Link Mode. Sneak-right-click an Energizing Rod and then right-click its assigned Energizing Orb if manual pairing is required, or allow them to auto-link by ensuring each cluster of 16 rods is closest to its target orb. Verify that all rods emit active laser beams when a test recipe is inserted.
7Wire the Comparator Batch Control
Place a Redstone Comparator reading directly off each Energizing Orb. Run that redstone signal to lock the input Hopper or modded item dropper feeding the orb. Because the Energizing Orb breaks down and stalls if extra items are shoved in mid-craft, this comparator lock guarantees the next batch of ingredients only drops once the previous craft has been extracted.
8Configure Filtered Output Extraction
Place extraction hoppers or item pipes beneath each Energizing Orb leading into your Finished Component Storage. Set up a strict whitelist filter containing only your target outputs—such as Nitro Crystals, Overcharged Alloys, or custom KubeJS singularities—so raw input materials are never prematurely pulled out of the orb.
How it works
Powah Reactors operate on a multi-input efficiency scale. While they only strictly require Uraninite to generate FE, feeding them Water and solid coolant ( optimally Dry Ice) alongside Carbon (Coal/Charcoal) and Redstone drastically multiplies both fuel efficiency and raw FE/t output. By grouping four high-tier reactors together and dumping their combined generation into an Ender Cell buffer, the system smooths out any power spikes caused by heavy factory machinery.
The KubeJS Energizing Factory relies on parallel laser injection. A single Energizing Orb has no internal FE/t absorption limit; its crafting speed is strictly bounded by the total transfer rate of all Energizing Rods linked to it. By hanging 16 Nitro or Overcharged Energizing Rods above each orb and feeding them via high-capacity Energy Cables, recipes requiring tens or hundreds of millions of FE finish in mere ticks.
Item handling is the true bottleneck of any Energizing Orb setup. If an orb receives a second batch of ingredients before the current recipe finishes, the recipe invalidates and the lasers shut down. Reading the orb with a Redstone Comparator outputs a signal the moment items enter the orb, immediately locking the input feeder until the finished energized product is pulled out from the bottom.
Upgrades and scaling
- Replace the Energy Cable canopy with direct Ender Gates (Nitro/Overcharged) placed directly onto the back of every single Energizing Rod to eliminate cable transfer limits and reduce block update lag.
- Integrate an AE2 Pattern Provider or Refined Storage Crafter set to 'Blocking Mode' on each Energizing Orb, replacing the vanilla comparator circuit for seamless on-demand autocrafting of all Powah and KubeJS tiers.
- Automate Dry Ice and Uraninite production using a dedicated Soul Sand Valley / Deep Dark quarry or mystical agriculture setup to make the quad-reactor array 100% self-sustaining.
Common mistakes
- Feeding un-batched items into the Energizing Orb: Dumping a full stack of Iron and Gold into an orb will jam it permanently. Always insert exact recipe quantities (e.g., 1 Iron + 1 Gold for 2 Energized Steel) one craft at a time.
- Forgetting to add battery capacity to the Ender Cell: A freshly placed Ender Cell has 0 FE capacity. You must shift-click Energy Cells or Battery items into its internal channel GUI before it can transfer or store energy.
- Mismatched Cable and Rod Tiers: Using Starter or Basic Energy Cables to feed Nitro or Overcharged Energizing Rods will starve the lasers. Always match your cable throughput tier to the cumulative draw of the rods connected to that line.
- Allowing Solid Coolant to run dry: If Dry Ice runs out while the reactor is running at max redstone acceleration, yourFE/t output will plummet and fuel consumption will skyrocket. Keep a dedicated buffer chest of Dry Ice monitored at all times.
FAQ
Why are my Energizing Rods not shooting lasers at the Energizing Orb?
Check three things: ensure the rods have power in their internal buffer, verify the orb contains an exact valid recipe (check JEI for custom KubeJS quantities), and use a Powah Wrench in Link Mode to manually bind each rod to the correct orb.
How do I get the Overcharged tier if I only see up to Nitro in standard Powah?
Standard Powah! (Rearchitected) caps out at the Nitro tier. The Overcharged tier and custom high-FE recipes are added by companion add-ons or modpack-specific KubeJS scripts—always check JEI to see the exact block names and FE values in your pack.
Can Powah Reactors melt down or explode if they run out of Water or Dry Ice?
No, Powah Reactors are completely safe and will never explode or leak radiation. If they run out of Water or Dry Ice, their temperature rises, which simply reduces their FE/t output and increases Uraninite burn rates until coolant is restored.