Powah! (Rearchitected) · Late game
Self-Sustaining Nitro Reactor & Dry Ice Cooling Plant
This setup creates a fully autonomous, high-yield power plant using a Nitro Reactor paired with an on-site Dry Ice and Uraninite processing facility. By constantly feeding the reactor all four auxiliary materials (Coal, Redstone, Dry Ice, and Water) alongside enriched Uraninite, it achieves maximum thermal efficiency and peak Forge Energy output. It is the ultimate late-game power solution for heavy automation bases before transitioning to massive creative-tier grids.
- Footprint
- 9x7x5 blocks
- Power
- Peak Nitro-tier output (commonly ~250 kFE/t in default configs; check JEI)
- Throughput
- 100% Reactor Uptime with continuous Dry Ice & Uraninite synthesis
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Reactor (Nitro) | 36 |
| Energy Cable (Nitro) | 16 |
| Energy Cell (Nitro) | 1 |
| Ender Cell (Nitro) | 1 |
| Ender Gate (Nitro) | 2 |
| Energizing Orb | 2 |
| Energizing Rod (Nitro) | 6 |
| Chest | 4 |
| Hopper | 8 |
| Comparator | 2 |
| Redstone Dust | 6 |
| Repeater | 2 |
| Dispenser | 1 |
| Water Bucket | 1 |
| Wrench (Powah!) | 1 |
Build it step by step
1Construct the Nitro Reactor Core
Clear a 9x7x5 area. In the center-right section, hold 36 Reactor (Nitro) blocks in your hand and place one on the ground; Powah! will automatically build the 3x4x3 multiblock structure for you. Leave at least two blocks of clearance around all sides for cabling and item logistics.
2Install the Fluid Cooling System
A Powah! Reactor requires an initial internal water fill to enable solid coolant processing. Place a Dispenser facing directly into one of the bottom Reactor blocks with a Water Bucket inside, or route a fluid pipe from an infinite water source if using other mods. Trigger the Dispenser to fill the internal tank, and set the Reactor GUI to Auto-Mode so it pauses when full of energy.
3Build the Dual Energizing Arrays
To the left of the reactor, place two Energizing Orbs spaced three blocks apart. Around each Orb, mount three Energizing Rod (Nitro) units atop Energy Cable (Nitro) pillars. Use your Powah! Wrench in Link Mode to bind three rods exclusively to the first Orb (for Uraninite enrichment) and the other three rods to the second Orb (for Dry Ice synthesis).
4Wire the Comparator Batch Controllers
Energizing Orbs craft fastest when they contain strictly one recipe's worth of items. Place a Hopper feeding into the side of the Dry Ice Orb, and read the Orb with a Vanilla Comparator running a 3-dust redstone line back to lock that Hopper whenever two Blue Ice are inside. For the Uraninite Orb, a direct Hopper from an input chest containing Raw Uraninite or Uraninite Ore works immediately since those recipes only require a single input item per craft.
5Route Fuel and Auxiliary Inputs
Place Hoppers underneath both Energizing Orbs to extract completed Uraninite and Dry Ice, pointing them into a Hopper chain leading into the Reactor's side faces. Connect two additional Hoppers from dedicated storage chests directly into other faces of the 3x4x3 Reactor to continuously supply Coal (Carbon) and Redstone.
6Connect Power & Self-Sustaining Feedback Loop
Run Energy Cable (Nitro) from the top center block of the Reactor into an Energy Cell (Nitro). From the output side of the Energy Cell, branch the Energy Cable (Nitro) back to the six Energizing Rods to create a closed-loop power supply, and place an Ender Gate (Nitro) on the Energy Cell or main cable line to broadcast surplus energy to your wireless Ender Network.
How it works
Powah! Reactors operate on a multi-variable efficiency curve. While a Reactor can run solely on Uraninite, its output is severely throttled and its fuel consumption is poor. Introducing Carbon (Coal/Charcoal) and Redstone increases the fuel buffer and generation multiplier, though Redstone also raises the reactor's internal operating temperature. To counteract this heat penalty and unlock maximum FE/t output, the reactor needs both liquid Water and a solid coolant—with Dry Ice offering the highest cooling rating in the mod.
This plant guarantees 100% uptime on all modifiers by tapping a tiny fraction of the Reactor's output from the Nitro Energy Cell buffer to power six Nitro Energizing Rods. Because the Energy Cell acts as a capacitor, the Energizing Orbs can still process a fresh batch of Dry Ice or Uraninite even if the Reactor briefly pauses while your base's energy buffers are completely full.
Any block of the 3x4x3 Reactor multiblock acts as a universal I/O port for items, fluids, and energy. By splitting the inputs across multiple faces using vanilla Hoppers, you avoid item-clogging bottlenecks without needing complex external logistics mods. Furthermore, engaging the Reactor's built-in 'Auto Mode' ensures that not a single piece of Uraninite or Dry Ice is burned when the attached Nitro Energy Cell reaches 100% capacity.
Upgrades and scaling
- Replace the vanilla Hopper and Comparator feeding the Dry Ice Energizing Orb with a modular router or smart logistical transporter set to 'Regulate: 2 items' for compact, zero-redstone crafting.
- Upgrade the local buffer by slotting high-tier Battery (Nitro) items or Energy Cell (Nitro) blocks inside an Ender Cell (Nitro) linked to your main network channel, giving the plant millions of FE in wireless backup storage.
- Scale horizontally by tiling additional 3x4x3 Nitro Reactors along the same Nitro Energy Cable spine; a single pair of Nitro-powered Energizing Orbs can effortlessly sustain up to four Nitro Reactors running at full tilt.
Common mistakes
- Overfilling the Dry Ice Energizing Orb: Flooding the Orb with a full stack of Blue Ice prevents it from crafting because the recipe strictly requires exact multiples of two Blue Ice without extra clutter.
- Forgetting liquid Water: Solid Dry Ice cannot cool the reactor on its own; the internal water tank must remain filled for solid coolants to function.
- Leaving 'Auto Mode' disabled in the Reactor GUI: Without Auto Mode turned on, the reactor will continue burning Uraninite, Coal, Redstone, and Dry Ice even when its internal energy buffer and connected Energy Cells are completely full.
- Linking all six Energizing Rods to one Orb: By default, rods auto-link to the nearest Orb when placed; always verify rod bindings with the Powah! Wrench so both Orbs receive power.
FAQ
Why use Coal and Redstone if they are optional?
Carbon sources like Coal significantly boost fuel efficiency, while Redstone spikes production speed and output at the cost of extra heat—which our automated Dry Ice line immediately neutralizes for a massive net gain in FE/t.
How do I jumpstart the system if the Energy Cell is completely empty?
Drop a single piece of manual Uraninite directly into the Reactor GUI; it will immediately generate enough initial power to charge the Energy Cell and kick off the automated Energizing Orbs.
Does the Reactor consume Water continuously?
It consumes a very small amount of water periodically when warming up or processing solid coolant, so keeping a fluid pipe or filled dispenser attached ensures it never runs dry over long periods.