Powah! (Rearchitected) · Mid game

Nether-Pumped Magmator Power Plant

The Nether-Pumped Magmator Power Plant is a reliable mid-game geothermal setup that transforms vast Nether lava lakes into steady Forge Energy. By pairing a remote lava pump with Powah's wireless Ender Network, this build creates a self-sustaining energy loop across dimensions. It provides abundant, low-maintenance power ideal for running automated ore processing lines and digital storage systems.

Footprint
7x5x3 blocks (Overworld Plant) + 3x3x3 blocks (Nether Pump)
Power
Generates ~3.2 kFE/t to 8 kFE/t depending on tier (Check JEI for exact Blazing/Niotic Magmator output)
Throughput
Consumes moderate lava per second under full load
Difficulty
intermediate

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

LavaForge Energy (FE)LavaLavaLavaForge Energy (FE)Forge Energy (FE)Wireless FE (Channel 1Forge Energy (FE)Nether Lava LakeINPUTFluid Pump (CompanionMod)MACHINEEnder Gate (Blazing)LOGISTICSDimensional Fluid TankLOGISTICSFluid Pipe NetworkLOGISTICSMagmator (Blazing) x4POWEREnergy Cable (Blazing)LOGISTICSEnder Cell (Blazing)STORAGEEnergy Cell (Blazing)OUTPUT
InputMachinePowerStorageLogisticsOutputFluidEnergy

Materials

ItemCount
Magmator (Blazing)4
Ender Cell (Blazing)1
Energy Cell (Blazing)1
Ender Gate (Blazing)1
Energy Cable (Blazing)8
Wrench (Powah!)1
Fluid Pump (Any Companion Tech Mod)1
Dimensional Fluid Tank / Ender Tank2
Fluid Pipes (Any Companion Tech Mod)6
Lava Bucket (For Kickstarting)4

Build it step by step

  1. 1Construct the Magmator Array

    In your Overworld base, place the four Blazing Magmators in a straight row with a one-block gap between them or directly adjacent. Ensure the front faces are accessible so you can easily monitor their internal fluid buffers and GUI settings.

  2. 2Route the Energy Cables

    Run a line of Blazing Energy Cables along the top or back of the four Magmators. Connect this cable line directly into your Blazing Energy Cell for local base power storage, and branch it off into the Blazing Ender Cell for wireless transmission.

  3. 3Configure the Ender Network

    Open the Blazing Ender Cell GUI and select Channel 1. Shift-click your Blazing Energy Cell (or excess batteries) into the Ender Cell interface to add capacity to that specific wireless channel. Set the Ender Cell's I/O configuration to accept incoming energy from the cables.

  4. 4Plumb the Overworld Lava Supply

    Place one Dimensional Fluid Tank at the end of your Magmator row. Run your Fluid Pipes from the tank into the back or bottom faces of all four Magmators, and set the pipe connection at the tank to extract.

  5. 5Deploy the Nether Pump

    Travel to the Nether and locate a massive lava ocean. Build a small, secure platform just above the lava surface and place your Fluid Pump so its intake reaches the lava below. Place your second Dimensional Fluid Tank directly on top of or adjacent to the pump's fluid output face, ensuring both tanks share the same color code or frequency.

  6. 6Attach the Ender Gate

    Stick the Blazing Ender Gate directly onto the power input face of your Nether Fluid Pump. Right-click the Ender Gate to open its GUI, select Channel 1, and set its mode to extract energy from the wireless network into the pump.

  7. 7Prime and Chunkload

    Manually pour one Lava Bucket into each Overworld Magmator to kickstart power generation. Once the Ender Cell charges up, the Nether pump will automatically receive wireless FE and begin refilling the system. Finally, ensure both the Nether pump chunk and the Overworld plant chunk are chunkloaded.

How it works

This setup operates as a closed-loop geothermal feedback system. The core power producers are Powah's Magmators, which consume lava in small increments to generate a high-efficiency stream of Forge Energy. Because Powah focuses purely on power generation, storage, and transfer, it pairs naturally with standard modded fluid logistics like Ender Tanks and fluid pumps to handle the liquid transport from the Nether.

The secret to keeping this build compact and self-sustaining is the Powah Ender Network. Instead of running cumbersome dimensional power tethers or maintaining a separate coal generator in the Nether, the Overworld Magmators feed a small fraction of their output into an Ender Cell. The low-profile Ender Gate attached to the Nether pump taps directly into this wireless channel, drawing just enough power to keep the lava flowing back to the Overworld.

Upgrades and scaling

  • Upgrade the Magmators, Cables, and Ender components from Blazing to Niotic, Spirited, or Nitro tiers using the Energizing Orb to drastically increase FE/t output.
  • Expand the array from 4 to 16 Magmators as your base demands grow, ensuring your Nether fluid pump is upgraded with speed modifiers to match the increased lava consumption.
  • Add Ender Gates directly onto high-drain machines around your base to eliminate long runs of Energy Cables.

Common mistakes

  • Forgetting to add capacity to the Ender Cell; by default, a newly placed Ender Cell has 0 FE capacity on its channels until you insert an Energy Cell or Battery into its GUI.
  • Failing to chunkload the Nether pump location, which causes the lava supply to stop the moment you leave the dimension.
  • Allowing the system to completely drain of power without a backup kickstart, which halts the Nether pump and requires manual priming with a Lava Bucket.
  • Using lower-tier Energy Cables that bottleneck the combined output of the four Magmators; always check JEI to ensure your cable transfer rate exceeds total generation.

FAQ

Why is my Ender Gate not powering the Nether pump?

Check the Ender Cell GUI in the Overworld to ensure both the Cell and the Gate are on the exact same channel, and verify that you have added battery capacity to that channel.

Does Powah! have its own fluid pump and fluid pipes?

No, Powah! (Rearchitected) is strictly an energy mod. You must use fluid pumps, pipes, and dimensional tanks from companion mods in your modpack.

Do Magmators keep consuming lava when my energy cells are full?

No, Magmators have an internal energy buffer. Once your Energy Cells, Ender Cell, and the Magmators' internal buffers are completely full, they will automatically pause lava consumption.

More Powah! (Rearchitected) designs

Powah! (Rearchitected) · Mid gameAutomated Energizing Orb Crafting MatrixThe Energizing Orb from Powah! (Rearchitected) is notoriously tricky to automate because stuffing multiple sets of ingredients inside it at once stalls the crafting process completely. This setup uses a simple vanilla Redstone Comparator latch combined with a dropper and hopper system to feed exact single-item or multi-item recipe batches only when the Orb is completely empty. Surrounding the core with multiple mid-tier Energizing Rods ensures rapid processing without manual babysitting.Intermediate7 steps
Powah! (Rearchitected) · Late gameSelf-Sustaining Nitro Reactor & Dry Ice Cooling PlantThis setup creates a fully autonomous, high-yield power plant using a Nitro Reactor paired with an on-site Dry Ice and Uraninite processing facility. By constantly feeding the reactor all four auxiliary materials (Coal, Redstone, Dry Ice, and Water) alongside enriched Uraninite, it achieves maximum thermal efficiency and peak Forge Energy output. It is the ultimate late-game power solution for heavy automation bases before transitioning to massive creative-tier grids.Advanced6 steps
Powah! (Rearchitected) · Late gameMulti-Channel Ender Network & Player Charging HubThis late-game centralization project establishes a massive energy reservoir and a wireless distribution network using Powah! (Rearchitected). By segregating your power grid into dedicated Ender Network channels and integrating a Dimensional Binding Card, you can safely power remote quarries, base machinery, and your own inventory across any dimension without laying miles of cable. Building this hub prevents total base blackouts by isolating heavy power consumers from critical life-support and storage systems.Advanced8 steps
Powah! (Rearchitected) · End gamePowah: Overcharged Hyper-Reactor & KubeJS FactoryThe Overcharged Hyper-Reactor & KubeJS Factory is an endgame megastructure designed to automate custom, high-cost energizing recipes while generating millions of FE/t. By pairing an array of Nitro-to-Overcharged Reactors with a multi-laser Energizing Orb matrix, this setup breezes through the deepest power bottlenecks of expert modpacks. Build this when your standard Nitro power grid can no longer sustain massive KubeJS crafting loops or ultimate-tier multidimensional machinery.Advanced8 steps
Powah! (Rearchitected) · Early gamePassive Thermo Generator & Blazing Crystal ArrayThe Passive Thermo Generator & Blazing Crystal Array is a zero-maintenance, early-game power plant designed to run indefinitely without consuming fuel items. By pairing Powah's Thermo Generators with the high heat multiplier of Blazing Crystal Blocks and a self-replenishing water supply, you achieve reliable base power. This setup is ideal for bootstrapping your energy grid and charging your initial Energy Cells with minimal effort.Beginner6 steps