Storage Drawers · Addon guide · Intermediate
Fluid Drawers & Drawer Tanks Addon Guide
Managing bulk liquids often forces players to build separate, bulky tank arrays away from their main item sorting systems. By using the Drawer Tanks addon for the Storage Drawers family, you can store massive volumes of fluids right alongside your items using the exact same upgrade mechanics and aesthetic blocks. This guide covers crafting fluid drawers, scaling their capacity, and connecting them seamlessly to automated pipe networks.
What you need
- Storage Drawers base mod and the Drawer Tanks addon installed
- Basic Drawers or Trim blocks matching your wood type
- Buckets or fluid containers for manual testing
- Storage Upgrades (Obsidian, Iron, Gold, Diamond, Emerald) and a Void Upgrade
- Drawer Key and Quantify Key
- Drawer Controller and fluid pipes from any standard tech mod
Step by step
1Craft and Place Your Drawer Tanks
Look up the Drawer Tank recipe in JEI, which typically combines standard drawer materials with glass or buckets to create a fluid-capable vessel. Place the Drawer Tank into your existing storage wall next to your standard item drawers. Ensure the front glass face is oriented toward your walkway so you can easily read the fluid level and interact with it.
Tip: You can use Framed Drawer Tanks on a Framing Table if you want your liquid storage to match custom walls or machines.
2Insert and Extract Fluids Manually
Hold a filled bucket or modded fluid container and Right-Click the front face of the Drawer Tank to dump the liquid inside. To extract the fluid, hold an empty bucket and Right-Click (or Left-Click, depending on your specific loader configuration) to pull a bucket's worth of liquid back out. Watch the front rendering fill up to visually confirm the liquid is stored.
3Open the Upgrade Interface
Empty your main hand, hold Shift, and Right-Click the Drawer Tank to open its internal management GUI. Inside this interface, you will see the exact millibucket (mB) count of the stored fluid alongside several upgrade slots. This works on the exact same logic as standard item drawers, bypassing the need for special fluid-only upgrades.
4Scale Up with Storage Upgrades
Place your crafted Storage Upgrades (such as Gold, Diamond, or Emerald tier) into the slots inside the Drawer Tank GUI, or simply Right-Click them directly onto the front of the tank. Each upgrade multiplies the base fluid capacity by a specific factor; check JEI or the upgrade tooltip to see the exact multiplier for your modpack. Add a Void Upgrade into one of the slots if this tank will receive endless byproduct liquids like creosote or excess water.
Tip: Never remove a capacity upgrade while the tank is full, or the system will block the action to prevent fluid loss.
5Lock the Tank with Keys
Hold a Drawer Key and Right-Click the Drawer Tank to lock it to its currently stored fluid. When a tank is locked, it will retain its fluid assignment even when completely drained to zero millibuckets. Next, tap the tank with a Quantify Key so the exact millibucket total is displayed as text directly on the front glass.
Tip: Always lock your tanks before hooking up pipes so random leftover liquids in your network do not accidentally claim an empty tank.
6Integrate into Fluid Pipe Networks
Attach fluid pipes from your preferred logistics mod directly to the back or sides of the Drawer Tank, or connect them to a central Drawer Controller linked to your wall. Configure your pipes to pump fluids in or out just as you would with any standard modded fluid tank. Because the tank shares the block-trim network logic, adjacent connected drawers and controllers can bridged together for clean, hidden wiring behind your wall.
7Deploy Linked Tanks for Remote Processing
Craft a pair of Linked Tanks from the addon to act as fluid Ender Chests. Lock and dye or tune both Linked Tanks to the same channel, placing one at a distant pump site (like a lava lake or oil well) and the other inside your main base storage wall. Fluid pumped into the remote tank is instantly accessible from the tank in your base without running long-distance chunk-loaded pipes.
How it works
Drawer Tanks operate by translating the item-stack architecture of Storage Drawers into Forge or Fabric fluid capabilities (measured in millibuckets, where 1,000 mB typically equals one bucket). Instead of holding dozens of different liquids in small amounts, a Drawer Tank dedicates its entire internal memory to a single fluid type, allowing massive volume storage with zero lag from complex inventory rendering.
Because the addon hooks directly into the base mod's upgrade and key registry, you do not need to maintain two separate ecosystems of upgrades. A Diamond Storage Upgrade applies its exact same multiplier logic to the tank's base millibucket pool as it does to an item drawer's stack limit. Similarly, the Void Upgrade intercepts incoming fluid packets once the maximum millibucket threshold is reached, deleting the overflow rather than halting the attached pipe network.
When placed adjacent to other drawers and connected to a Controller, the tanks participate in the unified drawer network. External fluid pipes or digital storage buses (like Applied Energistics or Refined Storage fluid interfaces) view the tank as a standard fluid handler, allowing seamless automated insertion and extraction based on your locked key filters.
Common mistakes
- Leaving automated tanks unlocked: If an unlocked tank empties completely during a crafting job, the next random fluid entering the pipe line will fill it and ruin your machine inputs. Always use a Drawer Key first.
- Forgetting a Void Upgrade on byproduct tanks: If a tank storing a secondary fluid hits 100% capacity, the producing machine will back up and stop working altogether. Add a Void Upgrade to safely discard excess liquids.
- Using item pipes instead of fluid pipes: Even though Drawer Tanks look like standard drawers and fit in the same wall, standard item conduits cannot extract raw liquids from them unless you are using a unified cable system or fluid-specific pipes.
- Trying to store NBT-heavy potions without testing: Some mods treat potions as items rather than true fluids; always verify in JEI whether a liquid has an actual millibucket fluid form before building a tank array for it.
FAQ
Can I store multiple liquids in a single Drawer Tank like 2x2 item drawers?
Check JEI for the specific block variants included in your version of the addon; while standard single-fluid tanks hold the highest volume, multi-slot fluid drawers divide the total base capacity among the individual compartments just like 1x2 or 2x2 item drawers.
Do Downgrade upgrades work on Drawer Tanks?
Yes, applying a One-Stack Downgrade restricts the tank to a single basic unit (typically one bucket's worth of fluid), which is highly useful when you only want to buffer a tiny amount of rare liquid without filling a whole tank.
How do I move a full Drawer Tank without losing the liquid inside?
Use Packing Tape from the base Storage Drawers mod on the tank before breaking it, or check if the addon natively retains fluid data in the broken block's tooltip.
How do Linked Tanks differ from normal Drawer Tanks?
Normal tanks store their fluid locally inside that specific block, whereas Linked Tanks share an internal inventory across dimensions—similar to an Ender Chest—allowing multiple tanks on the same frequency to pull from the same fluid pool.
By integrating Drawer Tanks into your Storage Drawers wall, you can centralize both items and bulk fluids using a single set of upgrades, keys, and clean pipe networks.