Storage Drawers · Setup guide · Beginner

How to Customise Drawers with the Framing Table

Standard wooden Storage Drawers are deeply functional, but their limited vanilla wood palettes often clash with heavily themed builds or futuristic bases. This guide teaches you how to use the Framing Table to apply almost any solid block texture in the game to the side, trim, and front face of your drawers. Mastering this mechanic lets you seamlessly camouflage your massive storage walls into any architectural style without sacrificing functionality.

What you need

  • Wood Trim (any vanilla wood type)
  • Sticks
  • Chest (for crafting the base drawers)
  • Framing Table
  • Framed Drawers (1x1, 1x2, or 2x2 configuration, or Framed Trim/Controller)
  • Solid blocks of your choice to act as textures (e.g., Cobblestone, Glass, Iron Blocks, Terracotta)

Step by step

  1. 1Craft the Framing Table

    Open your Crafting Table and place Wood Trim in a standard table shape—typically forming a top row and two legs—to craft the Framing Table. Check JEI or your in-game recipe book for the exact placement in your specific modpack version. Notice that the Framing Table is a multiblock structure that requires two horizontal blocks of space when placed in the world.

    Tip: You can use any wood variant of Trim to craft the table; the wood type does not restrict the textures you can apply later.

  2. 2Create Blank Framed Drawers

    Craft Framed Drawers by surrounding a regular Drawer (or Chest and Trim combination) with Sticks in a Crafting Table. Unlike standard oak or spruce drawers, Framed Drawers have a pale, unfinished scaffolding appearance. You can also craft Framed Trim, Framed Compacting Drawers, and Framed Controllers using similar stick-surrounding recipes.

    Tip: Craft your Framed Drawers in bulk before moving to the Framing Table to speed up the decoration process.

  3. 3Understand the Framing Table Slots

    Right-click the Framing Table to open its interface. On the left side, you will see a large main input slot for your unstyled Framed Drawer, alongside three distinct material slots arranged vertically or in a triangle. These three smaller slots correspond to the Side texture (top-left), the Trim texture (top-right), and the Front face texture (bottom).

    Tip: If you only put a block in the Side slot, that single block texture will automatically apply to both the sides and the front face unless you specify otherwise.

  4. 4Insert Your Texture Blocks

    Place your blank Framed Drawer into the main left slot. Next, place any solid building blocks into the three material slots to preview how they look together in the output slot on the right. For example, place Polished Andesite in the Side slot, Dark Oak Log in the Trim slot, and Tinted Glass in the Front slot.

    Tip: Experiment with non-opaque blocks like Glass or Leaves in the Side slot to create fascinating see-through storage walls.

  5. 5Retrieve Your Customised Drawer

    Once you are satisfied with the live preview on the right side of the GUI, pull the finished drawer from the output slot into your inventory. Doing this consumes the blank Framed Drawer and one of each decorative block you placed in the material slots. Place the newly styled drawer in the world, and it will function identically to a standard Storage Drawer.

    Tip: You can put a stack of 64 Framed Drawers and stacks of 64 decorative blocks into the table to decorate an entire batch at once.

  6. 6Batch Style or Copy Designs

    If you are playing a version or add-on that includes Framing Templates or hand-framing tools, you can save a design configuration to apply to drawers already placed in the world. Alternatively, keep one finished drawer in your inventory as a visual reference while batch-crafting in the Framing Table. For extreme micro-customisation in older or specific compatible modpacks, look into the Drawers & Bits add-on to use Chisel & Bits materials as textures.

    Tip: Check JEI by searching '@storagedrawers' to see if your specific mod loader version includes hand-framing templates or fluid Drawer Tanks.

How it works

Under the hood, a Framed Drawer does not create thousands of new block IDs for every possible block combination in Minecraft. Instead, it acts as a dynamic block entity (tile entity) that stores the block IDs of your chosen decorative materials in its NBT data. When the game renders the drawer, it reads those saved IDs, pulls the native texture skins from those blocks, and wraps them around the 3D geometry of the drawer.

Because the drawer is simply borrowing the texture map of the source block, it works seamlessly with blocks from almost any other mod—provided those blocks use a standard cube model. Furthermore, once a Framed Drawer is placed and filled with items, you can still use standard upgrades, keys, and controllers on it; the custom framing is purely a visual overlay sitting on top of the standard Storage Drawers logic.

Common mistakes

  • Trying to frame a standard wooden drawer: You cannot put a regular Oak Drawer into the Framing Table; you must craft the pale 'Framed Drawer' variant using Sticks first.
  • Using complex 3D blocks as textures: Blocks with custom geometry like Fences, Stairs, Anvils, or Chests will either be rejected by the Framing Table or render with broken, glitchy textures. Stick to full, solid cubes.
  • Leaving insufficient space for the table: The Framing Table is two blocks wide, just like a double chest or a bed. Trying to place it in a single-block gap against a wall will fail.
  • Wasting expensive blocks on the front slot when unnecessary: If you want the side and the front to be the exact same expensive material (like Diamond Blocks), only put the block in the Side slot and leave the Front slot empty. The table defaults the front texture to match the side, saving you one block per drawer.

FAQ

Can I re-frame a drawer if I change my base design later?

Yes. Empty the drawer of all its stored items and upgrades, break it, and place it back into the Framing Table with new decorative blocks to overwrite the old textures.

Do Framed Drawers cause more lag than regular drawers?

In massive quantities (hundreds in a single chunk), Framed Drawers can have a slightly higher rendering cost than normal drawers because the client has to stitch dynamic textures together, especially if you use transparent blocks like Glass.

Can I use modded blocks from other mods in the Framing Table?

Yes, almost any standard full-cube block from another mod (such as modded stone, metal blocks, or planks) will work automatically because the table reads the block's base texture dynamically.

Can I frame the Drawer Controller and Trim blocks too?

In most modern versions and ports of Storage Drawers, you can craft Framed Trim, Framed Compacting Drawers, and Framed Controllers/Slaves so your entire storage network matches seamlessly. Check JEI for the exact recipes.

By combining blank Framed Drawers with any solid blocks inside a Framing Table, you can completely customise the side, trim, and front textures of your storage network to match any build style.

More Storage Drawers guides

Storage Drawers · Getting startedStorage Drawers Getting Started GuideThis guide teaches you how to replace chaotic early-game chest monsters with an organized, high-capacity Storage Drawers wall. By mastering basic drawer crafting, size selection, and direct-click interactions, you will spend far less time sorting items and much more time building and exploring.Beginner6 steps
Storage Drawers · ProgressionAll Drawer Upgrades and Keys ExplainedMastering the upgrades and keys in Storage Drawers transforms simple wooden containers into a massive, lag-free automated warehouse. By understanding how capacity multipliers, utility modules, and administration keys work together, you will prevent item overflows, protect your sorting layouts, and boost your game performance. This guide covers every tier of storage progression and the exact mechanics behind each specialized key.Beginner8 steps
Storage Drawers · Setup guideHow to Build a Drawer Controller Storage NetworkA Drawer Controller Storage Network centralizes your entire wall of drawers into a single access point for both manual dumping and automated piping. By combining the Drawer Controller with Trim blocks and Controller Slaves, you can build an expansive, room-spanning storage system that organizes your inventory with a single double-click. This guide will walk you through constructing the physical network, bridging structural gaps, and setting up secondary automation ports.Intermediate6 steps
Storage Drawers · ExplainedCompacting Drawers Logic & Auto-Compression GuideMastering the Compacting Drawer allows you to eliminate the tedious manual crafting of metals, gems, and resources by providing instant, zero-power conversion between nuggets, ingots, and blocks. This guide breaks down the internal storage math and recipe-detection logic of Compacting Drawers so you can integrate them seamlessly into your mid-game automation networks.Intermediate6 steps
Storage Drawers · AutomationHow to Connect Storage Drawers to AE2 and Refined StorageConnecting a Storage Drawers network to Applied Energistics 2 or Refined Storage creates the ultimate hybrid storage system. By routing bulk resources like Cobblestone, Iron Ingots, and Redstone into drawers, you prevent your expensive digital storage disks from overflowing with millions of common items. This guide covers the exact setup to make your digital network automatically prioritize your drawer wall.Intermediate6 steps
Storage Drawers · AutomationHow to Build a Lag-Free Farm Sorter with Storage DrawersHigh-yield farms can easily overwhelm standard chest systems, causing dropped items to back up, clog hoppers, and generate severe server or world lag. In this guide, you will build a dedicated Storage Drawers wall using a Drawer Controller, a Drawer Key, and Void Upgrades. This setup will automatically sort, store, and safely delete excess farm drops without ever stalling your item collection pipes.Intermediate7 steps