Storage Drawers · Automation · Intermediate
How to Connect Storage Drawers to AE2 and Refined Storage
Connecting a Storage Drawers network to Applied Energistics 2 or Refined Storage creates the ultimate hybrid storage system. By routing bulk resources like Cobblestone, Iron Ingots, and Redstone into drawers, you prevent your expensive digital storage disks from overflowing with millions of common items. This guide covers the exact setup to make your digital network automatically prioritize your drawer wall.
What you need
- Drawer Controller (1)
- Various Drawers (Oak Drawers 1x1, 1x2, 2x2, or Compacting Drawers)
- Drawer Key (1)
- Void Upgrades and Storage Upgrades (Iron, Gold, Diamond, or Emerald)
- Trim blocks (optional, for bridging gaps without using extra drawers)
- For AE2: ME Storage Bus and ME Glass Cable (plus an active ME Network)
- For Refined Storage: External Storage and Cable (plus an active RS Network)
Step by step
1Build the Drawer Wall and Place the Controller
Construct a contiguous wall of drawers and place a single Drawer Controller directly touching at least one of the drawers. Every drawer in the wall must connect to the Drawer Controller either directly or through a chain of other adjacent drawers or Trim blocks. Keep the entire structure within the controller's range limit (typically a dozen blocks in any direction, check JEI or your mod configuration for the exact radius).
Tip: You can hide your wiring by placing the Drawer Controller at the back or bottom of the wall and using Trim blocks to connect it to the front-facing drawers.
2Populate and Lock Your Drawers
Right-click at least one item of each resource you want to store in bulk into its respective drawer slot. Once populated, hold your Drawer Key and right-click the front of the Drawer Controller itself. This single action locks every connected drawer simultaneously, displaying a small gold lock icon on their faces.
Tip: If you want to leave a few drawers empty for future bulk resources, lock them while they are completely empty so random items cannot enter them.
3Install Storage and Void Upgrades
Shift+Right-click each drawer with an empty hand to open its upgrade GUI, or simply right-click the drawer face while holding an upgrade. Insert Storage Upgrades to massively increase the stack capacity of high-volume items. Finally, add a Void Upgrade to drawers holding infinitely farmed items like mob drops or Cobblestone so excess items are safely deleted once the drawer reaches maximum capacity.
4Attach the Digital Storage Interface
If you are using Applied Energistics 2, attach an ME Storage Bus directly onto any face of the Drawer Controller and connect it to your main network with an ME Glass Cable. If you are using Refined Storage, place an External Storage cable directly against the Drawer Controller and link it to your RS Controller with standard Cables. Do not attach buses to the individual drawers—only the Drawer Controller needs a connection.
Tip: In AE2, the entire drawer wall will now only consume a single channel on your network, regardless of whether you have ten drawers or two hundred.
5Configure High Priority on the Bus
Right-click the ME Storage Bus or External Storage to open its configuration interface. Locate the Priority setting (often represented by a wrench or priority tab in the top corner) and set it to a high positive number like 100 or 1000. Ensure the Access Mode is left on its default 'Insert and Extract' (Bi-directional) setting so your digital terminals can both deposit into and pull from the drawers.
Tip: Do not put any filter items inside the Storage Bus or External Storage GUI; the locked drawers themselves act as the filter.
6Defragment Your Digital Drives
Items inserted into your digital system from now on will automatically go to the drawers, but items already sitting on your AE2 Cells or RS Disks need to be moved manually. Pull your storage disks out of their Drives and run them through an AE2 ME IO Port or a Refined Storage Disk Manipulator set to transfer items to the network. This flushes all existing bulk items off your digital drives and pushes them straight into your newly prioritized Drawer Controller.
How it works
The Drawer Controller acts as a central hub that scans all contiguous drawers and Trim blocks, compiling their inventories into a single massive virtual chest. When an ME Storage Bus or External Storage looks at the Drawer Controller, it does not see individual blocks; it sees one giant inventory containing hundreds of ultra-deep item slots.
Digital storage networks route incoming items based on a numerical Priority system. By setting the Storage Bus or External Storage priority higher than your standard Disk Drives (which default to 0), the network always checks the Drawer Controller first whenever an item enters the system. If a matching drawer is found, the item goes there instead of taking up bytes on your digital disks.
Locking the drawers with a Drawer Key is the linchpin of this automation logic. When a drawer empties completely, an unlocked drawer forgets what item it was holding and becomes a blank slot capable of accepting random junk from your digital terminal. A locked drawer remembers its assigned item even at zero quantity, forcing the Drawer Controller to reject any items that do not match your pre-assigned layout. Furthermore, the Void Upgrade reports to the digital network that the drawer always has room, preventing farm overflow from spilling onto your digital drives.
Common mistakes
- Leaving empty drawers unlocked: If you add new drawers to the wall without locking them first, your AE2 or RS system will immediately dump random unstackable items (like damaged armor or enchanted bows) into them because of the high priority.
- Forgetting Void Upgrades on automated farm outputs: If a drawer fills up completely and lacks a Void Upgrade, the Drawer Controller rejects further items, causing the excess to silently spill over and clog your digital storage disks.
- Attaching multiple buses to the same wall: Placing more than one Storage Bus or External Storage on a single drawer network causes the digital terminal to read the inventory twice, resulting in phantom duplicate item counts.
- Using Compacting Drawers without cautious crafting rules: Compacting Drawers expose nuggets, ingots, and blocks simultaneously to the digital network. If you queue a massive autocrafting job using blocks and ingots at the same time, the digital system may miscalculate available materials.
FAQ
Why are my digital items showing double or triple the actual amount when using Compacting Drawers?
This is normal behavior. Compacting Drawers tell the Drawer Controller how many Blocks, Ingots, and Nuggets it can provide simultaneously from the same pool of metal. Pulling one stack of Blocks will automatically reduce the displayed count of Ingots and Nuggets in your terminal.
Can I connect multiple Drawer Controllers to the same drawer wall to speed things up?
No, connecting two Drawer Controllers to the same contiguous block of drawers can cause severe lag and inventory reading conflicts. If you need a second connection point for pipes or buses, use a Controller Slave (or Drawer Controller IO, depending on your mod version) instead.
How do I add a new bulk item to the wall after the system is already running?
Keep the Drawer Key in your hand when placing a new drawer, lock it immediately while empty, insert one copy of the new item into the drawer face, and then run your digital disks through an IO Port or Disk Manipulator to flush existing copies into the new slot.
Does the Drawer Controller require power to communicate with AE2 or Refined Storage?
The Drawer Controller itself requires zero power or fuel to operate. However, the ME Storage Bus or External Storage attached to it does draw a small amount of passive energy from your AE2 or Refined Storage network.
By linking a locked, Void-Upgraded drawer wall to a high-priority Storage Bus or External Storage via a Drawer Controller, you permanently offload bulk resource management from your digital storage drives.