Powah! (Rearchitected) · Explained · Intermediate

Powah! Ender Network Explained: Ender Cells, Gates, and Wireless Power

Running thousands of Energy Cables across your base or into other dimensions is expensive, messy, and bad for game performance. This guide will teach you how to master the Powah! Ender Network, allowing you to store and transmit massive amounts of wireless Forge Energy (FE) anywhere in the world using Ender Cells and Ender Gates. By the end, you will have a clean, cross-dimensional power grid with customizable storage channels.

What you need

  • An established power source (such as Thermo Generators, Magmators, or a Powah! Reactor)
  • An Energizing Orb and Energizing Rods (required to craft Ender Cores)
  • At least one Ender Cell (Starter tier or higher, though Basic or hardened is recommended to start)
  • Several standard Energy Cells (or Simple Batteries) of any tier to act as capacity upgrades
  • One or more Ender Gates (for compact wireless extraction)
  • Powah! Energy Cables and a Wrench (optional, for local routing and configuration)

Step by step

  1. 1Craft Your Ender Cores

    Before you can tap into the Ender Network, you need Ender Cores. Set up your Energizing Orb with a few Energizing Rods connected to your main power line. Place the required ingredients—typically an Eye of Ender, a Dielectric Casing, and a Tiny Ender Core (check JEI or the Powah! Manual for your specific tier recipe)—into the Orb and wait for it to finish energizing.

    Tip: Automate your Energizing Orb early using comparators or smart hoppers, as higher-tier Ender Network components require a lot of energized materials.

  2. 2Build and Place the Sending Ender Cell

    Craft an Ender Cell using your new Ender Core and place it adjacent to your main power generation system or primary Energy Cable line. Unlike standard blocks, the Ender Cell does not have any internal power capacity when first crafted. It simply acts as an access terminal to your personal wireless network.

    Tip: Higher-tier Ender Cells (like Blazing, Niotic, or Spirited) offer higher maximum I/O transfer rates and access to more channels.

  3. 3Upgrade Channel Capacity with Energy Cells

    Right-click the Ender Cell to open its GUI. At the top, you will see numbered tabs representing your available Channels (up to 12 on the highest tiers). Select Channel 1, then hold Shift and left-click a standard Powah! Energy Cell (or Battery) in your inventory. The Energy Cell will be permanently consumed, and its exact FE capacity will be added to Channel 1 of your Ender Network.

    Tip: You can feed multiple Energy Cells into the same channel to stack its maximum storage capacity into the millions or billions of FE.

  4. 4Configure the Sending Cell to Input

    With Channel 1 now capable of holding power, look at the side configuration panel in the Ender Cell's GUI. Set the side connected to your generators or cables to 'In' (or 'In/Out'). You should immediately see the internal energy bar of Channel 1 filling up as it absorbs power from your base.

  5. 5Set Up a Receiving Ender Cell

    Travel to your remote outpost, mining quarry, or another dimension like the Nether. Place a second Ender Cell next to the machines or cable line you want to power. Open its GUI, make sure it is tuned to Channel 1, and set the connecting sides to 'Out'. Power will instantly flow from your home base's generation into your remote machines.

    Tip: Always make sure the chunk containing your sending Ender Cell and generators is chunk-loaded, otherwise power generation will stop when you travel away.

  6. 6Deploy Ender Gates for Direct Machine Power

    Crafting bulky Ender Cells for every single remote machine is inefficient. Instead, craft an Ender Gate, which is a small node that attaches directly to the side of any FE-compatible machine or cable. Place the Ender Gate directly onto the power-input face of a remote machine (like an Electric Furnace or Quarry), right-click it, and select Channel 1.

    Tip: Ender Gates cannot accept Energy Cell upgrades directly if you haven't initialized the channel first, though most interfaces allow upgrading from either block. Keep a main Ender Cell at base as your primary 'server' for neatness.

  7. 7Segment Your Grid with Multiple Channels

    As your base grows, open your main Ender Cell, click on Channel 2, and shift-click a few more Energy Cells into it. You can now use Channel 1 exclusively for general base machinery and dedicate Channel 2 to high-drain systems or emergency backup power for your Reactor coolant pumps.

How it works

To understand the Powah! Ender Network, you must stop thinking of the Ender Cell as a battery. An Ender Cell is purely a physical transceiver tied to your player UUID. The actual energy is stored in a virtual, cloud-like inventory called the Ender Network. Because this data is saved globally to your player profile, breaking an Ender Cell and picking it up does not destroy the energy inside it, nor does it clear the capacity upgrades you installed.

This virtual architecture is why you must sacrifice physical Energy Cells into the Ender Cell GUI. By consuming a physical battery, you are permanently expanding the maximum integer limit of that specific channel in your personal cloud. Once a channel has capacity, any Ender Cell or Ender Gate you place anywhere in the universe simply reads from and writes to that shared pool of energy.

The physical tier of the Ender Cell or Ender Gate you place in the world (Starter, Basic, Hardened, Blazing, Niotic, Spirited, Nitro) dictates two things: how many total channels you are allowed to view in the GUI, and the maximum transfer rate (FE per tick) that specific block can push or pull from the cloud. Even if Channel 1 holds 100 million FE, attaching a Starter Ender Gate to a machine will bottleneck the power delivery to the Starter tier's maximum transfer speed.

Common mistakes

  • Placing an Ender Cell and wondering why it accepts zero power: Remember that all channels start with 0 FE capacity. You must shift-click at least one standard Energy Cell or Battery into the selected channel slot before it can function.
  • Using high-tier cells with low-tier gates: Upgrading a channel with a Nitro Energy Cell gives you massive storage, but if you use a Basic Ender Gate at the destination, your machines will starve due to the Gate's low FE/t transfer cap. Match your Gate tiers to your machine demands.
  • Accidentally upgrading the wrong channel: Always double-check which numbered channel tab is highlighted before shift-clicking your expensive Energy Cells into the GUI. Consumed cells cannot be retrieved!
  • Putting an Ender Gate on a non-input side of a machine: Ender Gates transfer power directly into the block face they are attached to. If the target machine only accepts power from the back, putting an Ender Gate on the front will do nothing.

FAQ

If I break my Ender Cell, do I lose all the Energy Cells and power I put into it?

No. Both the upgraded capacity and the stored FE are bound to your player's global Ender Network, not the block itself. When you place the Ender Cell back down, everything will still be there.

What is the actual difference between an Ender Cell and an Ender Gate?

An Ender Cell is a full block that can transfer power on all six sides simultaneously and usually features higher transfer rates. An Ender Gate is a compact, cheaper attachment that only transfers power through the single block face it is mounted on, boasting a lower transfer rate for the same tier.

Can my friends on a multiplayer server use my Ender Network?

Because the Ender Network is tied to the player who placed the block, any Ender Cell or Gate YOU place will link to your network, powering your friend's base if you place it for them. However, if your friend places their own Ender Cell, it will open their own separate network.

Can I take the Energy Cells back out of an Ender Cell once I upgrade it?

No, consuming an Energy Cell or Battery to upgrade a channel's capacity is a permanent, one-way action.

By sacrificing standard Energy Cells into an Ender Cell's channel interface, you unlock a permanent, cross-dimensional wireless power cloud that can be easily accessed anywhere using compact Ender Gates.

More Powah! (Rearchitected) guides

Powah! (Rearchitected) · Getting startedHow to Get Started with Powah!: Dielectric Paste, Manual, and First GeneratorsPowah! (Rearchitected) is a powerhouse technology mod that scales from early-game coal generators up to massive nuclear reactors. In this guide, you will learn how to craft the foundational Dielectric Paste, set up your first Starter-tier Furnator, and build an Energizing Orb setup. Mastering these basics is mandatory because every advanced machine, cable, and energy cell in the mod relies on the energizing crafting system.Beginner7 steps
Powah! (Rearchitected) · ProgressionPowah! Tier Progression Guide: From Starter to NitroThis guide walks you through the seven-tier material and machine progression system in Powah! (Rearchitected), taking you from simple Starter components all the way to the massive power output of the Nitro tier. Mastering the Energizing crafting system and the additive machine upgrading loop will allow you to scale your Forge Energy (FE) generation effortlessly without ever throwing away your older equipment.Beginner7 steps
Powah! (Rearchitected) · AutomationHow to Automate the Energizing Orb (AE2, Refined Storage, and Vanilla Hoppers)The Energizing Orb is the core crafting apparatus in Powah! (Rearchitected), required for producing essential components like Energized Steel, Blazing Crystals, and Nitro Crystals. However, because the Orb accepts up to six items indiscriminately and only processes valid recipe combinations, naive automation will quickly overfill and jam it. This guide will teach you how to build foolproof, jam-free automation setups using Applied Energistics 2, Refined Storage, or simple Vanilla Redstone.Intermediate8 steps
Powah! (Rearchitected) · PowerPowah! Early & Mid-Game Power Guide: Furnator, Magmator, Solar, and Thermo ExplainedMastering early and mid-game power generation in Powah! is essential before you can build massive reactors or automate advanced crafting. This guide compares the Furnator, Magmator, Solar Panel, and Thermo Generator across their tiers, helping you choose the most efficient Forge Energy (FE) setup for your base. By understanding the fuel logic and setup requirements of each generator, you will establish a reliable, lag-free power grid that scales effortlessly.Beginner8 steps
Powah! (Rearchitected) · Setup guideHow to Build a 100% Passive Thermo Generator Power PlantThis guide teaches you how to construct a completely passive, zero-maintenance power plant using Thermo Generators from Powah! (Rearchitected). By combining high-tier permanent heat blocks with an automated water supply, you can generate thousands of FE per tick endlessly without ever mining coal or pumping lava again. Mastering this setup provides a rock-solid energy backbone to transition smoothly from mid-game automation into late-game Nuclear Reactors.Intermediate7 steps
Powah! (Rearchitected) · Setup guideHow to Build and Fuel the Powah! Reactor MultiblockThis guide walks you through constructing, automating, and optimizing the Reactor multiblock in Powah! (Rearchitected). Mastering this generator is crucial for mid-to-late game progression, as it delivers massive Forge Energy per tick (FE/t) far surpassing standard Furnators or Magmators. By balancing its auxiliary inputs and cooling systems, you will establish a reliable, high-output power plant for your entire base.Intermediate7 steps