LaserIO · Explained · Advanced
LaserIO Logic Explained: Sensor Cards and Wireless Redstone Channels
In this advanced guide, you will learn how to automate machine control in LaserIO using Sensor Cards and Redstone Cards across wireless channels. By reading exact inventory thresholds and applying boolean logic like AND, OR, and XOR, you can create smart, lag-free factories that automatically toggle machines on or off without laying down a single piece of vanilla Redstone dust.
What you need
- Laser Node (at least 2)
- Laser Wrench
- Sensor Card
- Redstone Card
- Basic Filter (or Count Filter, depending on your modpack version; check JEI)
- Logic Chips (Raw Logic Chip smelted or crafted into advanced variants if required by your pack)
- Card Holder (optional, for convenient inventory management)
- A storage block (e.g., Chest) and a redstone-sensitive machine (e.g., Furnace or modded generator)
Step by step
1Place and Link Your Laser Nodes
Place one Laser Node directly adjacent to the inventory you want to monitor (such as an output chest) and another Laser Node next to the machine you want to control. Equip your Laser Wrench, shift-right-click the first node to select it, and right-click the second node to establish a wireless laser connection. Ensure both nodes are within the maximum linking range, or use intermediate Laser Nodes as relays.
Tip: Laser connections can pass straight through solid blocks, allowing you to hide your control nodes behind walls or under floors.
2Prepare the Sensor Card and Filter
Right-click the Sensor Card in your hand to open its configuration GUI. You must insert a Filter into the designated filter slot inside the Sensor Card; without a filter, the card will not know what to look for. Before inserting the filter, open the Filter's GUI, place the target item (for example, Iron Ingots) into the ghost slot, and set the specific item count threshold you want to detect.
Tip: If you want to detect fluids or energy instead of items, you still use the same Sensor Card—just place a bucket of the fluid in the filter, or toggle the mode inside the card to read Forge Energy (FE).
3Configure the Sensor Threshold and Redstone Channel
Inside the Sensor Card GUI, choose the comparison logic (such as Greater Than, Less Than, or Equal To) relative to your filter's count. Next, locate the Redstone Channel color selector (Default is White) and choose a dedicated color, like Orange, to broadcast this specific signal. You can also adjust the tick interval to determine how frequently the Sensor Card scans the inventory.
Tip: Setting the tick polling rate slightly higher (e.g., every 20 or 40 ticks instead of every 1 tick) significantly improves server performance for non-critical machines.
4Insert the Sensor Card into the Storage Node
Open the GUI of the Laser Node attached to your storage block and switch to the directional tab corresponding to the block face touching the chest. Place your configured Sensor Card into one of the nine available card slots on that face. The node will immediately begin scanning the chest and outputting an internal redstone signal on the Orange channel whenever your filter conditions are met.
5Configure the Output Redstone Card
Take a Redstone Card and right-click it in your hand to open its settings. By default, a Redstone Card is set to Input mode; click the mode toggle button to switch it to Output mode. Set its Redstone Channel color to match the Sensor Card's channel (Orange in our example) so it listens to the correct internal frequency.
Tip: You can click the 'Invert' button (often represented by a redstone torch icon) inside the Redstone Card if you need the machine to turn OFF when the chest is full, rather than turning ON.
6Apply Boolean Logic (AND / OR / XOR)
To make your machine respond to multiple conditions at once (e.g., Chest A is full AND Tank B is empty), deploy a second Sensor Card elsewhere on your network broadcasting on a different channel, such as Magenta. In your Output Redstone Card GUI, enable the secondary channel feature and select Magenta, then cycle the Logic Operation button between AND, OR, and XOR. The Redstone Card will now evaluate both the Orange and Magenta channels simultaneously before emitting a physical signal.
Tip: Check the built-in Patchouli guide book ('LaserIO') to see exact visual diagrams of how Weak vs. Strong redstone outputs interact with adjacent blocks.
7Install the Redstone Card at the Machine Node
Open the Laser Node adjacent to the machine you wish to control and select the directional tab facing that machine. Insert your configured Output Redstone Card into one of the nine slots. The node will now physically emit a redstone signal directly into the machine block whenever your logical conditions evaluate to true.
Tip: Because each block face supports up to 9 cards, you can put your Redstone Card in the exact same face slot group that is already inserting items and energy into the machine.
How it works
LaserIO separates physical redstone in the world from internal network redstone. Within a connected web of Laser Nodes, there are 16 distinct color-coded Redstone Channels that act as virtual wires. Unlike physical redstone, signals on these internal channels travel instantly across all linked nodes without signal decay.
A Sensor Card acts as an internal signal generator. Instead of reading a physical redstone current, it queries the capability (Inventory, Fluid Tank, or Energy Buffer) of the adjacent block at a set tick interval. When the mathematical condition defined by the inserted Filter is satisfied, the Sensor Card injects a value of 15 (full strength) directly into the chosen color channel.
The Redstone Card acts as the bridge back to the physical world—and as a miniature logic gate. When set to Output mode, it monitors one or more internal color channels. By applying boolean operators (AND requires both channels active; OR requires at least one; XOR requires exclusively one), it calculates the final truth value in real-time and translates it into a physical block update on the target machine.
Common mistakes
- Forgetting to insert a Filter into the Sensor Card: A Sensor Card cannot read item counts on its own; it will remain permanently inactive until a configured Filter is placed inside its internal slot.
- Leaving the Redstone Card in Input mode: Redstone Cards default to reading physical signals from the world (Input). You must manually toggle the card to Output mode if you want it to power a machine.
- Selecting the wrong block face tab in the Laser Node: Each Laser Node has six tabs (North, South, East, West, Up, Down). Placing a card in the 'North' tab when your machine is to the 'East' means the signal will be sent into empty air.
- Mismatched channel colors when using Logic gates: If you enable AND/OR/XOR logic on a Redstone Card, ensure the secondary channel isn't accidentally left on Default (White) unless you actually have a sensor broadcasting on White, otherwise an AND gate will never trigger.
FAQ
Can a Sensor Card detect how much Forge Energy (FE) is in a battery or machine?
Yes. Instead of using an item filter, toggle the Sensor Card's mode to Energy. You can then specify a percentage or exact energy threshold to trigger the redstone channel.
Do I need a separate Laser Node just for the Redstone Card?
No. LaserIO allows up to 9 cards per block face. You can place an Item Card, Fluid Card, Energy Card, and Redstone Card all on the exact same side of a single Laser Node.
What is the difference between Strong and Weak redstone output on the Redstone Card?
A Weak signal only powers the block directly touching the Laser Node (like a redstone repeater pointing into a machine). A Strong signal hard-powers the adjacent block, meaning that block can also power other components touching it.
Can I throttle an Item Card directly using a Sensor Card without placing a Redstone Card?
Yes! Every Item, Fluid, and Energy Card has a built-in Redstone toggle in its own GUI (Ignored, High, or Low) and a channel selector. If you only want to stop item extraction when a chest is full, just set the Item Card to listen to the Sensor Card's color channel directly.
By combining Sensor Cards with the built-in boolean logic of Redstone Cards, you can utilize LaserIO's 16 wireless channels to automate complex machine states cleanly from a single block face.