Forestry · Addon guide · Advanced

Binnie's Mods Guide: Extra Bees, Extra Trees & The Genetics Lab Line

Mastering Binnie's Mods allows you to bypass the tedious randomness of traditional Forestry breeding by directly manipulating bee and tree genetics. In this guide, you will learn how to navigate the massive Extra Bees and Extra Trees species lines and construct a fully functional Genetics Lab to extract, sequence, duplicate, and splice perfect traits onto any specimen.

What you need

  • Standard Forestry infrastructure (Carpenter, Thermionic Fabricator, Centrifuge, Squeezer)
  • A strong, continuous RF/MJ power generation system
  • Genetics Lab machines: Lab Stand, Incubator, Isolator, Analyser, Sequencer, Polymeriser, and Inoculator
  • Consumables: Liquid DNA (via Genepool), Growth Medium, Bacteria, Ethanol, and Fluorescent Dye (glowstone)
  • Hardware: Empty Serum Vials, Empty Sequences, and relevant Databases (Apiarist, Arborist, or Gene Database)
  • A stock of surplus Drone bees or tree Pollen/Saplings with desirable traits

Step by step

  1. 1Navigate the Breeding Tree with the Master Databases

    Before mutating dozens of new species from Extra Bees and Extra Trees, craft the Apiarist Database and Arborist Database. Place them into a Lab Stand or hold them in your hand to inspect the massive mutation webs, requirements, and undiscovered branches. Always cross-reference with JEI to confirm exact mutation percentages and specific biome or foundation block requirements for your modpack version.

    Tip: Craft a Gene Database early on; it is essential for viewing and organizing the specific alleles you unlock later in the Sequencer.

  2. 2Produce Bacteria and Liquid DNA

    Set up an Incubator and supply it with Water and Growth Medium (crafted from sugar, bone meal, and dye) to brew Liquid Bacteria. Pump this Bacteria into a second Incubator and combine it with Ethanol to create Polymerising Bacteria, or combine it with Sugar to create Bacteria Vector. Alongside this, place a Genepool and feed it surplus drones or saplings together with Ethanol to melt them down into raw Liquid DNA.

    Tip: Automate a Forestry Squeezer and Still to keep a permanent buffer of Ethanol from biomass, as the genetics line consumes it rapidly.

  3. 3Extract Random Genes in the Isolator

    Place your target bee, sapling, or pollen into the Isolator along with Ethanol, Enzyme (produced in the Incubator), and Empty Sequences. When powered, the Isolator pulls a random allele from the specimen's chromosomes and writes it onto an Empty Sequence. Because the extraction can destroy the specimen, only use disposable drones or mass-produced saplings for this step.

    Tip: If you are hunting for a specific trait like Maximum Fertility or Nocturnal, breed a uniform pile of drones carrying that trait first so you have plenty of spares.

  4. 4Identify Traits with the Analyser

    The sequences pulled from the Isolator will initially appear as Unanalysed Sequences. Insert them into the Genetic Analyser along with Fluorescent Dye (typically Glowstone Dust) and power the machine. Once processed, hover over the sequence in your inventory to see which exact trait and chromosome it holds, such as Speed, Lifespan, Yield, or Species.

    Tip: Discard or recycle sequences containing common or weak traits immediately so they do not clutter your storage system.

  5. 5Fill Serum Vials in the Sequencer

    Take your analysed sequences containing desirable traits and place them into the Sequencer, along with Empty Serum Vials in the central slot and Fluorescent Dye. The Sequencer slowly reads the sequences and transfers the genetic code into the Gene Database while crafting an empty-charge Serum tailored to that specific trait. A single sequence rarely yields a 100% progress bar, so feed multiple identical sequences into the machine until the Serum Vial is fully encoded.

    Tip: Stronger sequences take longer to process and require more dye, so let the Sequencer run passively in a chunk-loaded area.

  6. 6Charge and Duplicate Serums in the Polymeriser

    A newly sequenced Serum Vial has zero charges and cannot be used yet. Insert the Serum into the Polymeriser and supply the machine with Liquid DNA, Polymerising Bacteria, and heavy power. The Polymeriser will gradually fill the Serum with charges, allowing you to use that same vial repeatedly to overwrite traits on multiple bees or trees without ever needing to isolate the gene again.

    Tip: Insert Gold Nuggets into the Polymeriser's catalyst slot to significantly speed up the replication process.

  7. 7Splice Perfection with the Inoculator

    Place your charged Serum Vial and the target bee (Drone, Princess, or Queen) or tree sapling into the Inoculator, and pump in Bacteria Vector. The machine will consume charges from the Serum to forcefully overwrite both the active and inactive alleles of the target specimen with the Serum's trait. Wait for the machine to cycle twice to guarantee that both the dominant and recessive slots are completely overwritten.

    Tip: Always inoculate both a Princess and a Drone with identical Serums so their offspring are 100% purebred and never mutate backward.

How it works

To understand the Genetics Lab, you must first understand Forestry's Mendelian genetics system. Every bee, tree, and butterfly possesses a genome divided into specific chromosomes (like Species, Speed, Fertility, or Fruit). Each chromosome holds two alleles: one active (dominant in expression) and one inactive (carried recessively). Traditional breeding relies on random Punnett square combinations during mating, which makes isolating ten perfect traits on a single specimen statistically exhausting.

Binnie's Genetics turns these abstract alleles into physical item data. The Isolator reads the NBT data of a specimen and copies one random allele onto a Sequence item. The Sequencer acts as a compiler: it consumes those single-use sequences to permanently register the allele into your Gene Database and formats an Empty Serum Vial to hold that exact genetic ID.

Once you have a Serum Vial, the Polymeriser uses raw Liquid DNA (broken-down genetic material from junk specimens) and Polymerising Bacteria to duplicate the genetic payload inside the vial, adding durability charges. Finally, the Inoculator uses Bacteria Vector as a biological delivery vehicle to inject that payload into a living specimen, overwriting both its active and inactive NBT tags for that chromosome. Once a Serum is created, you only ever need Liquid DNA and power to reuse it infinitely.

Common mistakes

  • Isolating genes from a Princess or a rare single sapling: The Isolator has a high chance of destroying the input specimen during extraction. Always duplicate your rare species into abundant Drones or extra saplings before putting them in the Isolator.
  • Confusing the three bacteria types: Liquid Bacteria is the base fluid, Polymerising Bacteria is strictly for charging Serums in the Polymeriser, and Bacteria Vector is strictly for injecting genes in the Inoculator. Pumping the wrong fluid into a machine will jam the tank.
  • Underestimating power requirements: The Polymeriser and Inoculator drain massive amounts of RF/MJ per tick. Running them on early-game peat or clockwork engines will cause the progress bars to stall or reset.
  • Only inoculating the Princess: If you apply Serums to a Princess and mate her with a normal Drone, the offspring will become hybrids and lose half the traits after one generation. Always inoculate both the Princess and a Drone to lock in a pure genetic template.

FAQ

Can I use Serums made from Bees on Trees?

No. While all specimens use the same Genetics Lab machines and fluids, chromosomes are strictly separated by organism type. Bee Serums only work on bees, and Tree Serums only work on saplings or pollen.

How do I combine multiple traits into one master Serum?

You can craft a Serum Array, which holds multiple individual Serums in a single item. When placed into an Inoculator, the machine will sequentially apply every trait inside the Array to your specimen in one automated run.

What should I do with hundreds of useless wild drones and saplings?

Send them straight to the Genepool with Ethanol. Even the most common Forest Drones or Oak Saplings melt down into the exact same Liquid DNA needed to charge your high-tier Serums in the Polymeriser.

Why did my Inoculator use two charges on a single bee?

The Inoculator uses one charge to overwrite the active allele and a second charge to overwrite the inactive allele. If the bee already had the target trait in one of its slots, it will only consume one charge.

By establishing a continuous production line of Bacteria, Ethanol, and Liquid DNA to fuel the Isolator, Sequencer, Polymeriser, and Inoculator, you can permanently capture the best traits from Extra Bees and Extra Trees and stamp them onto any specimen on demand.

More Forestry guides

Forestry · Getting startedForestry Getting Started Guide: From First Hives to Basic MachinesThis guide walks you through the foundational phase of the Forestry mod, taking you from harvesting your very first wild beehives to powering your initial processing machines. By mastering these early mechanics, you will establish a self-sustaining production line of bee products and unlock the advanced technologies required for automated farms and genetics.Beginner7 steps
Forestry · ExplainedForestry Bee Breeding & Genetics Explained: Chromosomes, Traits & Ignoble StockMastering bee breeding in Forestry allows you to automate the production of rare resources, from endless building materials to valuable metals. This guide breaks down the hidden Mendelian genetics governing your hives, explaining how chromosomes, mutation probabilities, and stock longevity work under the hood. By understanding these core mechanics, you will stop relying on blind luck and start engineering purebred, high-yield bee colonies.Intermediate6 steps
Forestry · AutomationHow to Automate Apiaries & Bee Breeding: Pipes, Filters & FramesManually cycling bees and harvesting honeycombs in Forestry quickly becomes tedious once you scale up your production. By automating your Apiaries, you can create a self-sustaining loop that continuously breeds Princesses and Drones while sending products straight to a Centrifuge. This guide will walk you through setting up a pure-breed bee loop, managing frame durability, and routing excess drones and combs efficiently.Intermediate6 steps
Forestry · Setup guideForestry MultiFarm Setup Guide: Block Layouts, Soldering Iron & Circuit BoardsSetting up a Forestry MultiFarm gives you a massive, modular system capable of automating trees, crops, peat, and orchards all in one structure. By learning how to build the multiblock layouts and configure circuit boards with a Soldering Iron, you can divide your farm into custom zones and secure an endless supply of biomass, wood, and food.Intermediate8 steps
Forestry · ProgressionHow to Breed Trees in Forestry: Pollination, Grafters & Butterflies ExplainedTree breeding in Forestry allows you to mutate vanilla saplings into dozens of exotic tree species that yield rare woods, high-energy fruits, and massive amounts of biomass. By mastering the mechanics of cross-pollination using bees and butterflies, you can engineer custom super-trees with maxed-out sappiness and sapling drop rates to fuel your entire base with renewable Ethanol. This guide walks you through setting up a pollination orchard, analyzing genetics with the Treealyzer, and harvesting mutations reliably using Grafters.Intermediate8 steps
Forestry · Setup guideHow to Build and Upgrade the Alveary: Heaters, Fans, Sieves & SwarmerIn this advanced Forestry guide, you will learn how to construct the multi-block Alveary and upgrade it with specialized component blocks. Mastering the Alveary allows you to bypass natural biome restrictions for exotic bees, automatically harvest tree pollen, and duplicate rare Princesses to dramatically scale up your resource production.Advanced6 steps