Forestry · Setup guide · Intermediate
Forestry MultiFarm Setup Guide: Block Layouts, Soldering Iron & Circuit Boards
Setting up a Forestry MultiFarm gives you a massive, modular system capable of automating trees, crops, peat, and orchards all in one structure. By learning how to build the multiblock layouts and configure circuit boards with a Soldering Iron, you can divide your farm into custom zones and secure an endless supply of biomass, wood, and food.
What you need
- Farm Blocks (crafted from Stone Bricks, Copper Ingots, Apatite, and Electron Tubes; exact count depends on farm size: 36, 60, 84, or 108 total blocks)
- 1 Farm Gearbox, 1 Farm Valve, and at least 1 Farm Hatch (these replace standard Farm Blocks in the structure)
- Soldering Iron and a Thermionic Fabricator (for crafting Electron Tubes)
- 1 Circuit Board (Basic, Enhanced, Refined, or Intricate)
- Electron Tubes matching your desired crops (e.g., Copper, Tin, Bronze, Iron, Apatite)
- Stone Bricks, Smooth Sandstone, or Bricks (to build the outer cultivating platform)
- Continuous supply of Water, Forge Energy/RF, Fertilizer (crafted from Apatite), and Dirt/Humus
Step by step
1Choose Your MultiFarm Dimensions and Craft Blocks
Forestry MultiFarms come in four fixed footprint sizes, all standing 4 blocks tall: Small (3x3 base, 36 blocks), Medium (3x4 base, 48 blocks), Large (4x4 base, 64 blocks), and Largest (5x5 base, 100 blocks). Craft enough standard Farm Blocks along with your functional blocks (Farm Gearbox, Farm Valve, and Farm Hatch) to match the total volume of your chosen size. Note that the decorative material you use to craft the Farm Blocks does not affect performance, though all blocks in one farm should be valid Forestry farm components.
Tip: Start with a 3x3x4 Small MultiFarm to learn the mechanics before scaling up to the 5x5x4 footprint.
2Construct the Central Multiblock Core
Build a solid rectangular prism using your Farm Blocks according to the dimensions you picked (for example, 3 blocks wide, 3 blocks long, and 4 blocks high). Replace three of the outer blocks—ideally on the bottom layer for easy cable and pipe routing—with one Farm Gearbox, one Farm Valve, and one Farm Hatch. Once the final block is placed, the texture of the structure will band together to show a valid multiblock has formed.
Tip: You can add a Farm Control block if you want to disable specific quadrants or the entire farm using redstone signals.
3Build the Cultivating Platform Ring
The MultiFarm does not plant on top of itself; instead, it farms a flat concentric ring around its base. Lay down a flat platform of Stone Bricks, Smooth Sandstone, or standard Bricks extending outward from the second layer (or bottom layer, depending on whether you want a recessed farm) of the central core. The platform extends outward in a diamond-like stepped pattern depending on the farm size (check JEI or the Forester's Manual for the exact radius of your chosen tier, generally extending 4 to 6 blocks out from each face).
Tip: If you are unsure where the valid platform area ends, start the farm with Dirt and Humus inside; it will automatically place soil only on valid platform bricks.
4Manufacture Electron Tubes in the Thermionic Fabricator
Power up a Thermionic Fabricator and fill its internal tank with Sand or Glass to create molten glass. Place a Redstone reception recipe along with your target metal or gem in the crafting grid to cast Electron Tubes (such as Tin Electron Tubes for Managed Crop farms or Bronze Electron Tubes for Managed Peat bogs). Check JEI for the exact tube material associated with the crop you want to harvest.
Tip: The Thermionic Fabricator constantly drains power to keep glass molten, so disconnect its power cable when you finish crafting your tubes.
5Program the Circuit Board with a Soldering Iron
Equip your Soldering Iron and right-click to open its GUI. At the top, cycle the mode selector to either 'Managed Farms' (the farm places soil, plants seeds, and harvests blocks) or 'Manual Farms' (you place the soil and plants yourself, and the farm only harvests drops, such as in an Orchard). Insert an Intricate Circuit Board to control all four directional quadrants (North, South, East, West), then slot up to four Electron Tubes to assign a farm type to each side.
Tip: Hold Shift while hovering over Electron Tubes in JEI to see exactly what farm mode they activate in Managed versus Manual configurations.
6Install the Circuit Board into the MultiFarm
Right-click any block of the formed MultiFarm core to open its main control interface. Take your newly soldered Circuit Board and place it into the socket slot on the right side of the GUI. Hover over the board in the slot to verify that the North, South, East, and West quadrants display your intended farm modes (such as Arboretum, Crop, or Orchard).
Tip: If you ever want to repurpose a Circuit Board, put it back into the Soldering Iron alongside Iron Electron Tubes to wipe it, or simply craft a fresh board.
7Connect Power, Water, and Item Logistics
Attach your power cable to the Farm Gearbox, a fluid pipe pumping continuous Water into the Farm Valve, and item pipes into the Farm Hatch. You must also supply Forestry Fertilizer (crafted from Apatite) into the fertilizer slot; the farm will completely halt operations without it. Use item pipes on the Farm Hatch to insert Dirt/Humus and seeds/saplings, as well as to extract harvested produce.
Tip: A Farm Hatch automatically outputs harvested items to adjacent inventories or pipes placed underneath it, making hopper automation effortless.
8Load Soil and Germlings to Begin Farming
Place the required soil and planting materials into the MultiFarm's internal inventory slots. For a Managed Arboretum (default without a circuit board, or using Copper Tubes in certain configurations), insert Dirt and Saplings; the farm will automatically convert the Dirt into Humus as it lays the soil out on the stone brick platform. For Manual farms like an Orchard, manually place the dirt and plant your fruit-bearing trees or crops on top of the brick platform yourself.
Tip: Keep an eye on the soil output slot; as Humus depletes into Sand over time in an Arboretum, the farm automatically pulls up the Sand and replaces it with fresh Humus.
How it works
The Forestry MultiFarm operates on a quadrant-based logic system driven by its central multiblock core. The central tower acts as a shared inventory and resource pool for water, energy, and fertilizer, while the four cardinal directions (North, South, East, and West) act as independent working zones. When you insert a Circuit Board, the farm reads the four Electron Tube slots on that board and maps them directly to the four physical directions of the cultivating platform around it.
Understanding the difference between Managed and Manual modes in the Soldering Iron is essential. Managed farms control the entire lifecycle of the plot: they place specific soil (like converting Dirt to Humus for trees or Bog Earth for peat), plant the saplings or seeds from the internal inventory, and break the blocks when fully grown. Manual farms, such as the Orchard or Cereal manual configurations, assume you have already built the soil, hydration, and plants on top of the stone brick platform; the farm simply scans for mature states (like ripe fruit leaves or grown crops) and harvests the yield while leaving the plant structure intact.
Resource consumption is tied directly to actions taken and climate biome statistics. Every time the farm places soil, plants a seed, or harvests a block, it consumes ticks of Fertilizer, millibuckets of Water, and bursts of energy. Building a MultiFarm in a dry or desert biome significantly increases water drain through the Farm Valve, whereas building in a damp biome reduces hydration overhead.
Common mistakes
- Using vanilla Bone Meal instead of Forestry Fertilizer: The MultiFarm strictly requires Fertilizer crafted from Apatite (or ash) in its dedicated fuel slot; it will not run on Bone Meal or compost.
- Selecting the wrong Soldering Iron mode before inserting tubes: The Soldering Iron defaults to different categories (like Electrical Engine upgrades). If you do not cycle the top button to 'Managed Farms' or 'Manual Farms' before inserting Electron Tubes, the board will not configure your farm.
- Building the cultivating platform out of Cobblestone or Dirt: The farm only recognizes valid platform blocks like Stone Bricks, Smooth Sandstone, or Bricks. It will place the actual farming dirt on top of these bricks, not replace them.
- Forgetting to supply plain Dirt for an Arboretum: While you can craft Humus manually, a Managed Arboretum is designed to take raw Dirt and internal Fertilizer/Water to generate and place Humus automatically; running out of Dirt stops soil replacement when old Humus degrades into Sand.
FAQ
Why is my MultiFarm formed, powered, and watered, but not planting anything?
Check three things: ensure you have Apatite-based Fertilizer in the fertilizer slot, confirm your cultivating platform is built out of valid bricks (like Stone Bricks) at the correct height, and verify you provided both the required soil (e.g., Dirt/Humus) and the seeds/saplings matching that quadrant's Electron Tube.
How do I set up a MultiFarm Orchard for fruit trees without cutting down the trees?
In the Soldering Iron, change the mode at the top to 'Manual Farms' and solder Copper Electron Tubes onto your Circuit Board to set the quadrants to Orchard mode. Place the Dirt and plant your bred fruit saplings on the stone brick platform manually; the farm will gently pluck ripe fruit from the leaves without chopping the logs.
Can one MultiFarm grow four completely different things at the same time?
Yes, as long as you use an Intricate Circuit Board (which has 4 tube slots) and stay within the same overarching mode (all Managed or all Manual). You can assign a different Electron Tube to each of the four slots to run trees on the North side, wheat on the South, potatoes on the East, and peat on the West.
Which layer of the 4-block-tall core should the stone brick platform touch?
The cultivating platform can align with either the very bottom layer of the central core (for an elevated soil bed) or one block higher, depending on whether you want a flush walkway, though aligning the brick platform with the bottom layer of the MultiFarm core is the most reliable standard layout.
By combining a properly sized Farm Block core, a valid stone brick cultivating platform, and an Electron Tube-programmed Circuit Board, you can automate up to four distinct agricultural operations simultaneously in a single Forestry MultiFarm.