Forestry · Setup guide · Advanced

How to Build and Upgrade the Alveary: Heaters, Fans, Sieves & Swarmer

In this advanced Forestry guide, you will learn how to construct the multi-block Alveary and upgrade it with specialized component blocks. Mastering the Alveary allows you to bypass natural biome restrictions for exotic bees, automatically harvest tree pollen, and duplicate rare Princesses to dramatically scale up your resource production.

What you need

  • 27 Alveary blocks (crafted using Impregnated Casings and Scented Paneling)
  • 9 Wooden Slabs (any type, for the roof)
  • Imperial Bees (for Royal Jelly) and Industrious Bees (for Pollen Clusters)
  • Carpenter and Thermionic Fabricator (for advanced crafting)
  • Alveary Heater, Alveary Fan, and Alveary Hygroregulator (optional climate upgrades)
  • Alveary Sieve and Woven Silk (for pollen collection)
  • Alveary Swarmer and a steady supply of Royal Jelly (for duplicating Princesses)
  • Forge Energy (FE) or RF power source and energy conduits
  • Fluid pipes paired with steady Water and Lava sources

Step by step

  1. 1Produce Scented Paneling

    Before building an Alveary, you must breed Imperial and Industrious bees in standard Bee Houses or Apiaries to harvest Royal Jelly and Pollen Clusters. Feed these materials along with Wood Pulp and Beeswax into a Carpenter filled with Water to craft Scented Paneling. Combine the paneling with Impregnated Casings to craft your base Alveary blocks.

    Tip: Automate Seed Oil and Honey production early, as you need massive amounts of both to craft the required 27 Alveary blocks.

  2. 2Assemble the Base 3x3x3 Alveary

    Place your 27 Alveary blocks in a solid 3x3x3 cube. Unlike many other multi-block structures in Minecraft, the Alveary must NOT be hollow; include the central core block. Top the entire 3x3 upper surface with 9 Wooden Slabs. If built correctly, the textures of the blocks will seamlessly merge into a single large structure.

    Tip: Leave at least one block of empty air around the entire structure, as placing adjacent Alvearies too close together will prevent both from forming.

  3. 3Install Climate Control Blocks

    To replace standard Alveary blocks with upgrades, break any block in the bottom two layers (avoiding the top layer under the slabs) and insert your upgrade block in its place. Install an Alveary Heater to raise temperature, an Alveary Fan to lower temperature, and an Alveary Hygroregulator to shift humidity. Connect the Heater and Fan to an external FE/RF power cable.

    Tip: Check JEI for the exact crafting recipes of Vacuum Tubes using the Thermionic Fabricator, as Heaters and Fans require specific electron tubes.

  4. 4Configure Temperature and Humidity

    Supply your Alveary Heater or Fan with power to shift the internal temperature by roughly one step per active block. Next, pump fluids into the Alveary Hygroregulator to alter both humidity and temperature simultaneously. Pumping in Water raises humidity (Damp) while slightly cooling the hive, whereas pumping in Lava lowers humidity (Arid) while slightly heating it.

    Tip: Use multiple Heaters or Fans if you need to force an extreme climate change, such as breeding Nether bees in a snowy biome.

  5. 5Add an Alveary Sieve for Tree Breeding

    Break another standard Alveary block in the bottom two layers and replace it with an Alveary Sieve. Open the Alveary GUI and insert Woven Silk into the designated sieve slot. As your bees operate near bred trees, the Sieve will consume the silk and capture pure tree pollen, allowing you to manually pollinate leaves without waiting for natural butterfly or bee cross-pollination.

    Tip: Always keep a Carpenter running with Silk Wisps from Tropical Bees to maintain a healthy backlog of Woven Silk.

  6. 6Duplicate Princesses with the Swarmer

    Replace a base block with an Alveary Swarmer and fill its internal inventory with Royal Jelly. While a Queen is active inside the Alveary, the Swarmer will consume the jelly and periodically generate a temporary Swarm Hive block nearby in the world. Locate and break this Swarm Hive with a Scoop to receive an identical copy of your active Princess.

    Tip: Swarm Hives usually spawn within a short radius around the Alveary, so keep the surrounding terrain flat and well-lit to spot them easily.

How it works

The Alveary acts as a single unified inventory and climate zone once the 3x3x3 block check and the 3x3 wooden slab roof check pass. Internally, it eliminates the harsh production penalty found in standard Apiaries, running at full base production speed while still allowing automation via item pipes. Because the multi-block shares data across all 27 positions, placing functional upgrade blocks anywhere in the lower two layers modifies the environmental variables of the entire hive.

Climate manipulation works on a stepped scale for both Temperature (from Icy to Hellish) and Humidity (from Arid to Damp). Normally, a bee species refuses to work if the local biome falls outside its genetic tolerance. The Heater, Fan, and Hygroregulator intercept the biome check and apply an internal modifier to the Alveary. This tricks the Queen into registering a valid environment without changing the actual world biome.

The Swarmer operates on a genetic degradation safeguard to maintain game balance. Any Princess obtained from breaking a Swarmer-generated hive is permanently tagged with the 'Ignoble' genetic trait (often labeled with a minus sign or specific stock text in the Beealyzer). While Ignoble Princesses produce combs identically to Pristine ones, they have a small chance to permanently die off after a substantial number of generations, preventing infinite exponential cloning from a single Swarm Hive.

Common mistakes

  • Leaving the center block hollow: The Alveary requires all 27 blocks to be placed in a solid 3x3x3 cube. Leaving the center empty will prevent the multi-block from forming.
  • Placing upgrades in the top layer: Putting Heaters, Fans, or Sieves in the top 3x3 layer directly beneath the wooden slabs will break the multi-block structure. Only place upgrades in the bottom or middle layers.
  • Using Frames without an addon: Standard Forestry Alvearies do not have frame slots. If you rely on frames for mutation chance or production boosts, you must use an addon mod that introduces an Alveary Frame Housing block.
  • Forgetting Woven Silk in the Sieve: The Alveary Sieve will not collect any tree pollen passively on its own; it requires a fresh piece of Woven Silk in its slot for every piece of pollen captured.
  • Assuming Swarmer Princesses last forever: Relying entirely on Ignoble Princesses from the Swarmer for your main breeding stock is dangerous, as they can eventually die out. Always keep your original Pristine Princess safe.

FAQ

Why are my Alveary blocks not merging into a multi-block structure?

Ensure the 3x3x3 cube is completely solid inside, the top is covered with 9 standard wooden slabs, no upgrade blocks are placed in the top layer, and no other Alveary is touching it.

Can I automate the Alveary with pipes?

Yes. You can attach item pipes or ducts to any standard Alveary block in the structure to extract combs and dead drones, and re-insert the Princess and Drone to create an infinite production loop.

How do I stop my Ignoble Princesses from dying out?

So long as you do not artificially push the Queen's lifespan or production modifiers to extreme levels using external frame addons, Ignoble bees can survive for dozens or even hundreds of cycles, though the small risk of dying remains.

Why is my Alveary Sieve not producing any pollen?

You must have valid Forestry trees (created by analyzing vanilla saplings in a Treealyzer and planting them) growing within the pollination territory of your active Queen, and the Sieve must contain Woven Silk.

Building and upgrading the 3x3x3 Alveary unlocks the true endgame of Forestry, allowing you to manipulate hive climates at will, harvest tree pollen effortlessly, and mass-produce resource-generating Princesses.

More Forestry guides

Forestry · Getting startedForestry Getting Started Guide: From First Hives to Basic MachinesThis guide walks you through the foundational phase of the Forestry mod, taking you from harvesting your very first wild beehives to powering your initial processing machines. By mastering these early mechanics, you will establish a self-sustaining production line of bee products and unlock the advanced technologies required for automated farms and genetics.Beginner7 steps
Forestry · ExplainedForestry Bee Breeding & Genetics Explained: Chromosomes, Traits & Ignoble StockMastering bee breeding in Forestry allows you to automate the production of rare resources, from endless building materials to valuable metals. This guide breaks down the hidden Mendelian genetics governing your hives, explaining how chromosomes, mutation probabilities, and stock longevity work under the hood. By understanding these core mechanics, you will stop relying on blind luck and start engineering purebred, high-yield bee colonies.Intermediate6 steps
Forestry · AutomationHow to Automate Apiaries & Bee Breeding: Pipes, Filters & FramesManually cycling bees and harvesting honeycombs in Forestry quickly becomes tedious once you scale up your production. By automating your Apiaries, you can create a self-sustaining loop that continuously breeds Princesses and Drones while sending products straight to a Centrifuge. This guide will walk you through setting up a pure-breed bee loop, managing frame durability, and routing excess drones and combs efficiently.Intermediate6 steps
Forestry · Setup guideForestry MultiFarm Setup Guide: Block Layouts, Soldering Iron & Circuit BoardsSetting up a Forestry MultiFarm gives you a massive, modular system capable of automating trees, crops, peat, and orchards all in one structure. By learning how to build the multiblock layouts and configure circuit boards with a Soldering Iron, you can divide your farm into custom zones and secure an endless supply of biomass, wood, and food.Intermediate8 steps
Forestry · ProgressionHow to Breed Trees in Forestry: Pollination, Grafters & Butterflies ExplainedTree breeding in Forestry allows you to mutate vanilla saplings into dozens of exotic tree species that yield rare woods, high-energy fruits, and massive amounts of biomass. By mastering the mechanics of cross-pollination using bees and butterflies, you can engineer custom super-trees with maxed-out sappiness and sapling drop rates to fuel your entire base with renewable Ethanol. This guide walks you through setting up a pollination orchard, analyzing genetics with the Treealyzer, and harvesting mutations reliably using Grafters.Intermediate8 steps
Forestry · PowerForestry Biofuel Power Plant Setup: Saplings to Ethanol & Bio GeneratorsIn this guide, you will build a completely self-sustaining biofuel power plant in Forestry by converting automated tree farm saplings into high-efficiency Ethanol. Mastering this closed-loop production line provides your base with a massive, renewable supply of Redstone Flux (RF) or EU without relying on finite mined fossil fuels.Intermediate6 steps