Forestry · Progression · Intermediate

How to Breed Trees in Forestry: Pollination, Grafters & Butterflies Explained

Tree breeding in Forestry allows you to mutate vanilla saplings into dozens of exotic tree species that yield rare woods, high-energy fruits, and massive amounts of biomass. By mastering the mechanics of cross-pollination using bees and butterflies, you can engineer custom super-trees with maxed-out sappiness and sapling drop rates to fuel your entire base with renewable Ethanol. This guide walks you through setting up a pollination orchard, analyzing genetics with the Treealyzer, and harvesting mutations reliably using Grafters.

What you need

  • Active Bee Houses, Apiaries, or Alvearies with working Queens (any species with a decent Pollination stat)
  • Vanilla saplings (Oak, Birch, Spruce, and Jungle to start the mutation tree)
  • Treealyzer and plenty of Honey Drops or Honeydew to power it
  • Grafter or Proven Grafter (purchased from an Apiarist Villager)
  • Spectacles or Naturalist's Helmet (crucial for seeing mutated leaves)
  • Scoop (optional, for catching Butterflies)
  • Carpenter and Thermionic Fabricator (for crafting the Treealyzer)

Step by step

  1. 1Establish an Active Bee Colony Near Your Orchard

    Trees in Forestry do not mutate on their own; they require active pollinators to transfer pollen between leaves. Place a few Bee Houses or Apiaries in the center of a cleared, flat dirt area and insert any bred Princess and Drone to create a working Queen. Bee Houses are actually superior for early tree breeding because they prevented bee mutation, last longer, and have a boosted pollination speed compared to standard Apiaries.

    Tip: Select bees with a larger Territory genome and a higher Pollination speed (such as Industrious or Cultivated bees) to cover more trees and trigger leaf mutations faster.

  2. 2Plant Parent Trees Within the Bee Territory

    Plant your starter vanilla saplings within the working territory of your beehives and bonemeal them into full trees. To achieve your first mutations—specifically the Silver Lime and Hill Cherry—plant Oak, Birch, and Spruce trees close enough that their canopies are within a few blocks of the hives. When you first break vanilla leaves or scan vanilla saplings, Forestry converts them into their genetic equivalents (Apple Oak, Silver Birch, Red Spruce, and Jungle).

    Tip: Keep tree trunks at least 3 to 4 blocks apart so their leaf canopies do not completely overwrite each other, giving you maximum exposed leaf surface area.

  3. 3Equip Spectacles to Spot Pollinated Leaves

    By default, a mutated leaf block looks almost identical to a normal leaf block, making it nearly impossible to spot with the naked eye. Craft a pair of Spectacles using Bronze Ingots and Glass Panes, and equip them in your helmet armor slot. With Spectacles equipped, any leaf block that has been cross-pollinated by your bees or butterflies will display a distinct, highlighted visual texture change.

    Tip: If you use a modular armor suit from another mod, look into crafting the Naturalist's Helmet or attaching the Apiarist's visor upgrade if supported.

  4. 4Harvest Mutated Leaves with a Grafter

    Once you spot a highlighted pollinated leaf block, do not break it with your hand or shears. Pollinated leaves have a very low natural drop rate, and breaking them normally will almost certainly waste the mutation. Craft a bronze Grafter and break the mutated leaf block with it to drastically increase the chance of receiving a mutated sapling or pollen.

    Tip: Standard Grafters have fragile durability (only a handful of uses). Trade with an Apiarist Villager to acquire Proven Grafters, which guarantee a 100% sapling drop rate and boast much higher durability.

  5. 5Scan New Saplings in the Treealyzer

    Right-click to open your Treealyzer, place Honey Drops or Honeydew into the top-left fuel slot, and insert your newly harvested sapling into the specimen slot. The Treealyzer will consume a drop of honey to identify the tree's active and inactive genetics, revealing if you got a purebreed or a hybrid (such as an Apple Oak-Silver Lime hybrid). You must analyze saplings before you can see their exact stats or use them nicely in automated sorting.

    Tip: Always check both the Active (left) and Inactive (right) columns in the Treealyzer. Even if a sapling looks like an Oak, it might be hiding a rare mutated species in its recessive gene slot!

  6. 6Purify Hybrids and Progress Up the Mutation Tree

    If you harvested a hybrid sapling, plant it in your orchard and let it grow. When a hybrid tree is pollinated by bees alongside another tree of the target species (or another identical hybrid), the resulting leaves have a chance to stabilize into a purebred sapling. Check JEI to view the exact parent combinations required for your next target species, such as crossing Silver Lime with Birch or Cherry to work toward Walnut, Chestnut, and Lemon trees.

    Tip: Some advanced trees have girth requirements (2x2 or 3x3 trunks). Check the 'Girth' stat in the Treealyzer; if it says 2x2, you must plant 4 identical saplings in a square before they will grow.

  7. 7Enclose Butterflies to Accelerate Pollination

    Once Forestry trees exist in your world, colorful Butterflies will begin spawning natively from the leaves. Rather than letting them fly away, build a large glass greenhouse around your breeding orchard. Butterflies wander from leaf to leaf and spontaneously trigger cross-pollination just like bees, plus they occasionally drop collected Pollen items when they die or are harvested.

    Tip: You can manual-pollinate! If you obtain a crystalline Pollen cluster from butterflies or an Alveary Sieve, simply right-click it directly onto any Forestry tree leaf to instantly force a pollination event without waiting for bees.

  8. 8Breed a Super-Tree for Biomass and Ethanol

    To create the ultimate biofuel tree, isolate genes for High 'Sappiness' (typically found on Blue Mahoe or Willow trees) and High 'Sapling' yield (often bred from Silver Lime or Myrtle Ebony). Cross-breed these trees together using pollen or adjacent planting until you get a sapling that holds both desired traits in its active genome. Feeding high-sappiness saplings into a Fermenter multiplies the Biomass output significantly compared to vanilla oak saplings.

    Tip: Pair high-sappiness saplings with Fruit Juice (squeezed from Forestry Cherries, Lemons, or Plums) inside the Fermenter to maximize your Biomass conversion ratio before distilling it into Ethanol.

How it works

At its core, Forestry tree breeding operates on Mendelian genetics, identical in logic to the mod's bee breeding system. Every Forestry sapling carries a chromosome pair for multiple traits: Species, Growth, Height, Fertility (sapling drop rate), Yield (fruit production), Sappiness (biomass yield in a Fermenter), Maturation speed, and Girth. Each trait has a dominant (Active) allele and a recessive (Inactive) allele.

Pollination occurs when a working bee queen ticks a pollination cycle, or when a butterfly lands on a leaf block. The pollinator picks up the genetic data from Tree A's leaf block and carries it to a random leaf block on Tree B within its territory. When that second leaf block receives the pollen, the game rolls a mutation calculation based on the two parent species. If successful, the leaf block transforms into a 'Pollinated Leaf' containing a randomized blend of Tree A and Tree B's active and inactive genes.

Vanilla trees are inherently inert in Minecraft's code. Therefore, Forestry waits until a bee interacts with a vanilla leaf (or until you pass a vanilla sapling through the Treealyzer) to convert the vanilla block into a Forestry TileEntity leaf. Once converted, those leaves can spawn butterflies, ripen fruits, and accept pollen from neighboring trees.

Common mistakes

  • Breaking mutated leaves by hand or with shears: Standard breaking rates for mutated leaves are punily low, often resulting in an empty hand. Always keep a Grafter or Proven Grafter on your hotbar before approaching your orchard.
  • Planting only a single sapling for a 2x2 or 3x3 girth tree: Species like Sequoia, Baobab, or Kapok often inherit a 2x2 or 3x3 Girth gene. A single sapling will refuse to grow no matter how much bonemeal you apply; you must plant 4 or 9 saplings with matching species traits in a square grid.
  • Forgetting to check biome requirements for butterflies and specific mutations: While most trees grow anywhere dirt is present, certain tree mutations (like the Willow) require specific temperature and humidity levels (such as damp or swamp biomes) for the cross-pollination mutation roll to succeed. Check JEI for biome restrictions.
  • Letting butterflies despawn or wander off: Butterflies are physical entities that fly away into unloaded chunks or die to environmental hazards. Building an enclosed greenhouse keeps your butterfly population dense, which passively automates leaf pollination even when your bees run out of lifespan.

FAQ

Why aren't my vanilla Oak and Birch leaves showing any pollinated spots?

First, make sure you are wearing Spectacles, or you will rarely see the texture difference. Second, verify your bee Queen is actively working (has flowers nearby and matching climate) and that your trees are inside the bee's Territory radius. Finally, be patient—initial pollination of vanilla leaves takes several minutes as bees must first convert them into Forestry genetic leaves.

How do I get a Proven Grafter if my regular Grafter keeps breaking?

You cannot craft a Proven Grafter normally. You must find or cure an Apiarist Villager (the villager associated with Forestry beekeeping) and trade emeralds and items with them to buy Proven Grafters, which offer 100% sapling drop rates and vastly superior durability.

Can I get tree pollen without waiting for bees to randomly hit leaves?

Yes! Once you progress to building a multiblock Alveary, you can install an Alveary Sieve block supplied with Woven Silk. Whenever your bees pollinate nearby Forestry trees, the Sieve will capture physical Pollen items that you can manually right-click onto specific leaves for instant, targeted breeding.

Which tree is best for generating power with a Bio Generator or Combustion Engine?

There is no single 'best' species because traits can be cross-bred onto any tree! However, out of the box, the Blue Mahoe has naturally high Sappiness, while the Silver Lime has high Fertility (more saplings dropped per leaf). Breeding Blue Mahoe's Sappiness onto a high-fertility, large-canopy tree gives you the ultimate renewable fuel source for your Fermenter.

By combining active bee colonies with Spectacles, Proven Grafters, and the Treealyzer, you can systematically mutate vanilla saplings into high-sappiness hybrid trees that supply limitless biomass and rare resources.

More Forestry guides

Forestry · Getting startedForestry Getting Started Guide: From First Hives to Basic MachinesThis guide walks you through the foundational phase of the Forestry mod, taking you from harvesting your very first wild beehives to powering your initial processing machines. By mastering these early mechanics, you will establish a self-sustaining production line of bee products and unlock the advanced technologies required for automated farms and genetics.Beginner7 steps
Forestry · ExplainedForestry Bee Breeding & Genetics Explained: Chromosomes, Traits & Ignoble StockMastering bee breeding in Forestry allows you to automate the production of rare resources, from endless building materials to valuable metals. This guide breaks down the hidden Mendelian genetics governing your hives, explaining how chromosomes, mutation probabilities, and stock longevity work under the hood. By understanding these core mechanics, you will stop relying on blind luck and start engineering purebred, high-yield bee colonies.Intermediate6 steps
Forestry · AutomationHow to Automate Apiaries & Bee Breeding: Pipes, Filters & FramesManually cycling bees and harvesting honeycombs in Forestry quickly becomes tedious once you scale up your production. By automating your Apiaries, you can create a self-sustaining loop that continuously breeds Princesses and Drones while sending products straight to a Centrifuge. This guide will walk you through setting up a pure-breed bee loop, managing frame durability, and routing excess drones and combs efficiently.Intermediate6 steps
Forestry · Setup guideForestry MultiFarm Setup Guide: Block Layouts, Soldering Iron & Circuit BoardsSetting up a Forestry MultiFarm gives you a massive, modular system capable of automating trees, crops, peat, and orchards all in one structure. By learning how to build the multiblock layouts and configure circuit boards with a Soldering Iron, you can divide your farm into custom zones and secure an endless supply of biomass, wood, and food.Intermediate8 steps
Forestry · Setup guideHow to Build and Upgrade the Alveary: Heaters, Fans, Sieves & SwarmerIn this advanced Forestry guide, you will learn how to construct the multi-block Alveary and upgrade it with specialized component blocks. Mastering the Alveary allows you to bypass natural biome restrictions for exotic bees, automatically harvest tree pollen, and duplicate rare Princesses to dramatically scale up your resource production.Advanced6 steps
Forestry · PowerForestry Biofuel Power Plant Setup: Saplings to Ethanol & Bio GeneratorsIn this guide, you will build a completely self-sustaining biofuel power plant in Forestry by converting automated tree farm saplings into high-efficiency Ethanol. Mastering this closed-loop production line provides your base with a massive, renewable supply of Redstone Flux (RF) or EU without relying on finite mined fossil fuels.Intermediate6 steps