Flux Networks · Getting started · Beginner
Flux Networks Getting Started Guide: From Flux Dust to Your First Network
Running thousands of energy cables across your base is messy, expensive, and causes massive game lag. This beginner guide will teach you how to use Flux Networks to transform simple Redstone Dust into Flux Dust and establish your very first infinite-range, cross-dimensional wireless power grid. By the end, you will be able to transmit energy directly from your generators to your machines without a single wire in sight.
What you need
- Access to Bedrock (at the bottom of the Overworld or in the Nether)
- A Diamond Pickaxe (to mine and move Obsidian)
- Several stacks of Redstone Dust
- Several blocks of Obsidian
- Ender Pearls or Eyes of Ender (check JEI for your specific modpack recipe)
- At least one active power generator and one energy-consuming machine from any tech mod
Step by step
1Set Up the Bedrock Crushing Station
Travel down to the very bottom of the world and expose a flat piece of Bedrock. Clear a two-block high space directly above the Bedrock. Place a single block of Obsidian against a wall so that it floats precisely one block above the Bedrock, leaving a one-block empty air gap between the Bedrock and the Obsidian.
Tip: You can shift-click to place the Obsidian against the side of an adjacent wall block to easily create that one-block gap.
2Crush Redstone into Flux Dust
Throw your Redstone Dust (using your drop key, usually Q) directly into the empty space on top of the Bedrock and beneath the floating Obsidian. Next, stand back and left-click (punch) the floating Obsidian block once. The Obsidian will instantly slam down like a heavy piston, crushing the Redstone against the Bedrock and turning it into Flux Dust.
Tip: You can throw multiple full stacks of Redstone Dust into the gap at the exact same time; a single Obsidian slam will convert all of it at once.
3Automate Your Flux Dust Supply
Once you collect your first batch of Flux Dust, use it to craft a Flux Block. Mine the Bedrock-adjacent floor and replace the piece of Bedrock you were using with this new Flux Block (only works after you have already made your first batch on real Bedrock). You can now move this entire crushing setup up to your main base, because a Flux Block acts as a permanent substitute for Bedrock when crushing more Redstone.
4Craft Flux Cores and Flux Blocks
Open your crafting table and combine your new Flux Dust, Obsidian, and Eyes of Ender (or Ender Pearls, check JEI to confirm exact recipes for your game version) to craft Flux Cores. You will also need to combine Flux Dust and Flux Cores to create a few additional Flux Blocks. These two items are the primary building blocks for every wireless device in the mod.
Tip: Make way more Flux Cores than you think you need, as every single power transmitter and receiver requires several of them.
5Craft a Flux Plug and a Flux Point
Using your Flux Cores and a Flux Block, craft one Flux Plug and at least one Flux Point. Think of the Flux Plug as an inlet: it pulls energy out of your generators and sends it into the wireless cloud. Think of the Flux Point as an outlet: it takes energy from the wireless cloud and pushes it directly into your machines or cables.
6Connect the Plug to Your Generator
Walk over to your power generator (such as a Coal Generator, Solar Panel, or Reactor) and attach the Flux Plug directly to its energy output face. If the connection is valid, the small prongs on the Flux Plug will physically extend and lock onto the generator. The Plug is now ready to drain power from the generator, though it cannot send it anywhere until you create a network.
Tip: You can also attach a Flux Plug to the output side of a battery or an existing energy cable if you want to broadcast an entire stored power bank.
7Create Your Wireless Network
Right-click the placed Flux Plug to open its interface. Notice that it currently says no network is selected. Click the 'Create Network' button (usually a plus icon in the top tabs), type in a recognizable name like 'Main Base Grid', pick a bright color, and set the security to Encrypted or Public depending on whether you play on a server. Once created, go back to the Network Selection tab and click your new network to bind the Plug to it.
Tip: Assigning a distinct color to your network makes the Flux Plug and Flux Point physically glow that color in the world, making troubleshooting much easier.
8Place and Link the Flux Point
Go to the machine you want to power (like an Electric Furnace or Pulverizer) and attach your Flux Point directly to its power input face. Right-click the Flux Point to open its menu, navigate to the Network Selection tab, and click on your 'Main Base Grid' network. The Flux Point will immediately change color to match your network, and energy will begin flowing wirelessly from your generator straight into your machine!
Tip: Within the Flux Point's main tab, you can toggle 'Bypass Limit' if your machine needs massive amounts of power per tick.
How it works
Flux Networks operates on a logical 'Cloud Pool' system rather than storing energy inside the wireless transmitters themselves. A Flux Plug acts exclusively as an extraction vacuum: every game tick, it checks how much energy is available in the generator it touches and compares that to how much energy your machines are actively requesting across the network.
Meanwhile, a Flux Point acts as an injection valve. When an attached machine needs power, the Point sends a demand signal to the network. The network instantly pulls the exact requested amount from your connected Flux Plugs and teleports it directly into the machine via the Flux Point, automatically converting the power unit (such as FE, RF, or TeamReborn Energy) on the fly.
Because the network only transfers energy when there is active demand (unless you add a Flux Storage block to the network), you do not have to worry about energy getting 'lost' in the air. Furthermore, because it bypasses long chains of physical cables that normally force the game to calculate power paths block-by-block, a Flux Network drastically reduces server and client lag.
Common mistakes
- Confusing Plugs and Points: Many beginners put a Flux Point on their generator and wonder why no power is entering the network. Remember the golden rule: Plugs PULL from generators, Points PUSH into machines.
- Right-clicking the Obsidian instead of left-clicking: When crushing Redstone on Bedrock, right-clicking the floating Obsidian will either do nothing or place a block from your hand. You must left-click (punch) the bottom or side of the Obsidian to trigger the crushing animation.
- Forgetting to chunk-load the generator: While Flux Networks transfers power across any distance and across dimensions, the chunk containing your power generator and Flux Plug must actually be loaded in memory. Fortunately, you can click the chunk-loading icon directly inside the Flux Plug's GUI to keep that chunk active!
- Leaving the transfer limit too low: By default, Flux Plugs and Points have a set transfer rate limit. If you connect a massive end-game reactor and it seems bottlenecked, open the Plug's GUI and toggle 'Bypass Limit' to enable unlimited transfer rates.
FAQ
Why isn't the Obsidian falling down when I punch it to make Flux Dust?
Make sure there is genuine Bedrock (or a crafted Flux Block) directly below the Redstone Dust, and ensure the gap is only a single block high. If you are playing on a custom modpack, check JEI to see if the pack author disabled in-world crushing in favor of a machine recipe.
Can one Flux Plug power multiple Flux Points at the same time?
Yes! You can connect one Flux Plug to a single large generator and place dozens of Flux Points on different machines all over your world. As long as they are all linked to the same network name, they will share the generator's output.
How do I charge the tools and armor in my player inventory wirelessly?
You need to craft a Flux Controller and place it anywhere in your base. Link it to your network, open its wireless charging tab, select the inventory slots you want to keep powered (like your hotbar and armor slots), and click apply.
Does Flux Networks store energy on its own?
Plugs and Points only have a tiny internal buffer to facilitate transfers. If you want to store surplus energy directly inside the wireless network cloud, you must craft and place a Basic, Herculean, or Gargantuan Flux Storage block and link it to your network.
By crushing Redstone between Obsidian and Bedrock to create Flux Dust, you can build Flux Plugs and Flux Points that completely replace messy cables with a lag-free, infinite-range wireless power network.