Flux Networks · Setup guide · Intermediate

How to Use Flux Networks Built-In Chunk Loading

Keeping remote power generators and automated quarries running while you explore other dimensions is essential for mid-to-late game progression. This guide shows you how to use the built-in chunk loading feature of Flux Networks directly on your Flux Plugs and Flux Points. By mastering this mechanic, you can maintain continuous cross-dimensional energy flow without crafting external chunk loader blocks.

What you need

  • At least one Flux Plug
  • At least one Flux Point
  • An established Flux Network (created via the network GUI)
  • A power generator (e.g., magmatic, solar, or reactor) and an energy consumer (e.g., a quarry or pump)
  • Server permission for Flux Networks chunk loading (enabled by default in single-player)

Step by step

  1. 1Confirm Chunk Borders

    Before placing your blocks, press F3 + G on your keyboard to reveal the glowing yellow and blue chunk borders. Your entire generator setup or quarry controller must sit inside the specific 16x16 chunk where you plan to place your Flux device. If a multi-block machine crosses a chunk border, half of it might freeze when you walk away.

    Tip: Try to build your remote power stations and resource extractors comfortably within a single 16x16 chunk to minimize the number of loaded chunks needed.

  2. 2Attach the Flux Plug to Your Generator

    Place your Flux Plug directly against the energy output face of your remote generator or battery buffer. Right-click the Flux Plug to open its interface, navigate to the Network Selection tab, and link it to your primary power network. Ensure the indicator changes to match your network color, confirming an active connection.

    Tip: Rename this connection in the Home tab to something descriptive like 'Nether Lava Pump' so you can easily identify it later from across the world.

  3. 3Enable Forced Chunk Loading on the Plug

    On the main 'Home' tab of the Flux Plug's GUI, look toward the lower toggle options to find the 'Forced Chunk Loading' switch. Click this toggle to turn it on. Once activated, the Flux Plug will immediately register a chunk-loading ticket for the exact 16x16 chunk it occupies.

    Tip: If the toggle is grayed out or refuses to turn on, the feature has likely been disabled in the server or modpack configuration files.

  4. 4Attach and Load the Flux Point at the Quarry

    Travel to your remote energy consumer, such as a digital miner or builder quarry, and attach a Flux Point to its power input face. Open the Flux Point's GUI, connect it to the exact same Flux Network, and toggle on its 'Forced Chunk Loading' option just as you did with the Plug. This ensures the machine receiving the power remains active to actually use it.

    Tip: Remember that loading the Flux Point only loads the chunk containing the quarry controller itself; most modern quarry mods handle loading their own target mining zones automatically.

  5. 5Verify Active Chunks in the Network Connections Tab

    Open any Flux device and click the 'Network Connections' tab (usually the fourth icon at the top) to view a list of every Plug, Point, and Storage block on your network. Look for the distinct chunk-loading icon next to your newly configured devices. This confirms that both ends of your power line are actively forcing their chunks to stay loaded.

    Tip: You can shift-click or select multiple connections in this menu to edit their settings wirelessly without traveling back to the remote sites.

  6. 6Manage Chunk Loading Remotely

    When your quarry finishes mining an area and no longer needs power, open the 'Network Connections' tab from any Flux block back at your main base. Find the remote Flux Point in the list, click its edit button, and toggle off 'Forced Chunk Loading' wirelessly. This frees up server memory and prevents unnecessary tick lag until you are ready to move the quarry.

    Tip: Make it a habit to audit this list periodically to turn off old chunk loaders you forgot about in other dimensions.

How it works

Minecraft optimizes performance by unloading chunks (16x16 block columns from bedrock to build height) when no player is nearby. Once a chunk unloads, all tile entities inside it—including generators, cables, and quarries—completely stop processing ticks. Even though Flux Networks transfers energy wirelessly across dimensions, it cannot pull energy from an unloaded generator or push energy into an unloaded machine.

When you toggle on Forced Chunk Loading inside a Flux Plug, Flux Point, or Flux Storage block, the mod requests a persistent chunk ticket from the game engine for that specific 16x16 chunk. This forces the game to keep processing tile entity ticks in that column as if a player were standing right next to it, allowing power generation and consumption to continue seamlessly while you are thousands of blocks away.

Crucially, a Flux connection only loads the single chunk it physically occupies, not a 3x3 chunk radius like some dedicated chunk-loader blocks do. Furthermore, this status is tied directly to the block and tracked globally by the Flux Network data, which is why you can monitor and toggle the loading state of a remote connection from any other terminal on the same network.

Common mistakes

  • Building across chunk borders: Placing a Flux Plug in one chunk while the generator's fluid pump or fuel pipe sits in an adjacent chunk will cause the generator to starve and shut down when you leave the area. Always use F3 + G to keep the entire setup in one chunk.
  • Loading only one end of the network: New players often chunk-load their remote quarry's Flux Point, only to wonder why it stops working when they leave their main base. If your base's power generators are not also chunk-loaded, power generation stops the moment you walk away from home.
  • Expecting Flux Point loading to load a quarry's mining zone: Toggling chunk loading on a Flux Point only keeps the quarry block itself ticking. If your specific quarry mod does not self-load the chunks it is actively digging, you will need a dedicated multi-chunk loader for the excavation area.
  • Leaving orphaned Flux blocks active: Forgetting to pick up a chunk-loaded Flux Point after dismantling a temporary mining outpost leaves that chunk ticking forever, slowly degrading server or single-player TPS over time.

FAQ

Why is the Forced Chunk Loading toggle disabled or unclickable?

Server administrators and modpack creators can disable Flux Networks' built-in chunk loading in the mod's configuration file (fluxnetworks-common.toml or similar) to prevent server lag or to force players to use a different chunk-claiming mod like FTB Chunks.

Does enabling chunk loading on a Flux Plug drain extra energy?

No. Unlike some tech mods that require constant FE/RF upkeep to maintain a chunk loader, Flux Networks provides chunk loading completely free of energy cost.

How many chunks does a single Flux Point or Plug keep loaded?

Each Flux device loads strictly the single 16x16 chunk it is placed inside. If your machine setup spans across two chunks, you would need to place a chunk-loaded Flux block in both chunks to keep the entire setup running.

Does chunk loading still work if the network runs out of power?

Yes. Because the chunk-loading ticket is tied to the Flux block's configuration rather than an energy upkeep cost, the chunk will remain loaded even if your network drains completely to zero energy.

By toggling Forced Chunk Loading on both your remote Flux Plugs and Flux Points—and keeping your machines strictly within 16x16 chunk borders—you can guarantee uninterrupted, cross-dimensional power generation and automation anywhere in your world.

More Flux Networks guides

Flux Networks · Getting startedFlux Networks Getting Started Guide: From Flux Dust to Your First NetworkRunning thousands of energy cables across your base is messy, expensive, and causes massive game lag. This beginner guide will teach you how to use Flux Networks to transform simple Redstone Dust into Flux Dust and establish your very first infinite-range, cross-dimensional wireless power grid. By the end, you will be able to transmit energy directly from your generators to your machines without a single wire in sight.Beginner8 steps
Flux Networks · ExplainedFlux Plugs vs. Flux Points Explained: Mastering Wireless Energy TransferRunning thousands of energy cables across your base is messy, expensive, and causes severe game lag. By mastering Flux Plugs and Flux Points, you will build a clean, wireless power grid capable of transferring limitless energy across any dimension. This guide breaks down the exact logic of how energy enters and exits your wireless network so you never confuse a Plug with a Point again.Beginner7 steps
Flux Networks · AutomationHow to Build an Automated Flux Dust FarmFlux Dust is the foundational material for every single component in Flux Networks, from Flux Plugs and Flux Points to Gargantuan Flux Storage. While crushing Redstone manually under Obsidian gets you started, automating the process ensures you have a massive supply ready for building a truly lag-free, cross-dimensional wireless energy network. In this guide, you will learn how to build a compact, automated Flux Dust converter using basic redstone and common collection tools.Intermediate6 steps
Flux Networks · Setup guideFlux Controller Guide: How to Enable Cross-Dimensional Inventory ChargingRunning out of battery on your powered tools and armor while exploring the Nether or End is a frustrating death sentence. This guide will walk you through setting up the Flux Controller from Flux Networks, allowing you to wirelessly and automatically charge every powered item in your inventory, armor slots, and Curios/Trinkets slots across any dimension. Once configured, your base's power grid will keep your personal gear topped off permanently, no matter how far you travel.Intermediate6 steps
Flux Networks · ProgressionFlux Storage Progression Guide: Basic, Herculean, and Gargantuan BuffersIn this guide, you will learn how to craft, configure, and upgrade the three tiers of Flux Storage in the Flux Networks mod: Basic, Herculean, and Gargantuan. Building a dedicated wireless energy buffer ensures your base never suffers a blackout during sudden power spikes or temporary generator fuel shortages.Beginner6 steps
Flux Networks · PowerFlux Networks Priority, Limits, and Surge Mode ExplainedMastering the Flux Networks GUI allows you to construct a blackout-proof power grid across multiple dimensions without placing a single run of heavy cabling. By understanding how Priority, Transfer Limits, and Surge Mode interact, you can ensure critical base infrastructure stays online even when power-hungry machinery drains your energy reserves.Intermediate8 steps