Flux Networks · Setup guide · Intermediate
Flux Controller Guide: How to Enable Cross-Dimensional Inventory Charging
Running out of battery on your powered tools and armor while exploring the Nether or End is a frustrating death sentence. This guide will walk you through setting up the Flux Controller from Flux Networks, allowing you to wirelessly and automatically charge every powered item in your inventory, armor slots, and Curios/Trinkets slots across any dimension. Once configured, your base's power grid will keep your personal gear topped off permanently, no matter how far you travel.
What you need
- An active energy generator (producing FE, RF, or TeamReborn Energy)
- 1x Flux Plug (to pull power from your generator or battery)
- 1x Flux Controller (to broadcast power to your player inventory)
- Optional: 1x Basic, Herculean, or Gargantuan Flux Storage (for an energy buffer)
- Flux Dust, Flux Blocks, and Flux Cores (check JEI or REI for exact crafting recipes, which start by crushing Redstone against Bedrock with Obsidian)
Step by step
1Connect a Flux Plug to Your Power Source
Before you can charge your inventory, you need to inject energy into a wireless network. Place a Flux Plug directly against the output face of your energy generator or main energy storage cube. You will notice the plug visually connects to the block, indicating it is ready to extract power.
Tip: If you have multiple generators, connect them to a central battery or energy cable first, then place a single Flux Plug on that line to keep your network connections tidy.
2Create and Select Your Flux Network
Right-click the placed Flux Plug to open its configuration GUI. Click the plus (+) icon in the top-right corner or navigate to the 'Create Network' tab. Enter a name for your network, choose a security setting (Encrypted or Private is best on multiplayer servers), pick a color, and click Create. Finally, go to the 'Network Selection' tab and click your newly created network to bind the Flux Plug to it.
Tip: You can bypass the initial transfer limit on the Flux Plug by toggling 'Bypass Limit' in the plug's home tab, ensuring your tools charge as fast as they possibly can.
3Place and Bind the Flux Controller
Craft a Flux Controller and place it anywhere in your base. Unlike plugs and points, the Flux Controller does not need to touch any cables or machines because it operates purely wirelessly. Right-click the Flux Controller, go to the 'Network Selection' tab (second tab at the top), and click the exact same network you linked your Flux Plug to.
Tip: Only one Flux Controller can be active per network. If you place a second one on the same network, it will not function until the first is removed or unassigned.
4Navigate to the Wireless Charging Tab
Inside the Flux Controller GUI, click on the 'Wireless Charging' tab at the top (represented by an icon that looks like a battery or lightning bolt). This menu displays a breakdown of your character's inventory sections: Armor slots, Baubles/Curios/Trinkets slots, Main Inventory, Hotbar, and Left/Right hands.
5Select Inventory Slots and Enable Charging
Click on the different inventory sections in the GUI to toggle them on (they will highlight when active). For a complete setup, enable the Hotbar, Armor, Off-hand/Main-hand, and Curios sections. Next, locate the master 'Enable Wireless Charging' toggle switch at the bottom of this menu, flip it on, and click the 'Apply' button to save your settings.
Tip: Leaving the 'Main Inventory' section disabled can be useful if you carry spare batteries or energy cells that you do not want draining your base's power grid unexpectedly.
6Enable Chunk Loading for Cross-Dimensional Access
For wireless charging to work when you leave your base or travel to the Nether, the chunks containing your power source, Flux Plug, and Flux Controller must stay loaded. Open the GUI for both your Flux Plug and your Flux Controller, toggle on the 'Forced Loading' option on the home screen, or use an external chunk-loading mod to keep your base active.
Tip: Some servers disable Flux Networks' built-in chunk loading to prevent lag. If the Forced Loading toggle is greyed out, use a mod like FTB Chunks instead.
How it works
Flux Networks operates on a hubless, tick-based global energy pool rather than physical cable routing. When a Flux Plug pulls energy from a generator, it converts that power into the network's internal buffer. Because the mod supports automatic energy conversion and unlimited transfer rates, it can take high-tier energy inputs and hold them ready for any connected receiver on the same network ID.
The Flux Controller acts as a specialized Flux Point (energy receiver) that targets player entities rather than block positions. Every server tick, an active Flux Controller checks the UUID of the network owner (and any permitted members added in the 'Network Members' tab). It scans the enabled inventory slots of those players across the entire server—regardless of dimension or coordinates—and directly injects energy into any item holding a compatible energy capability.
Because Minecraft automatically unloads chunks when no players are nearby, this wireless logic breaks down if the blocks themselves stop ticking. By keeping the Flux Plug, power generator, and Flux Controller chunk-loaded, the server continuously processes the energy extraction and player-scanning loops, achieving seamless cross-dimensional charging.
Common mistakes
- Forgetting to click the 'Apply' button in the Wireless Charging tab after toggling on your inventory slots; if you just close the GUI with Escape, the settings reset.
- Failing to chunk-load the power generator alongside the Flux Plug. Even if the Flux Plug and Flux Controller are force-loaded, your power will quickly dry up if the reactor or solar panels feeding the plug are in an unloaded chunk.
- Connecting a Flux Point to your generator instead of a Flux Plug. Remember the rule: Plugs *pull* energy into the network from generators, while Points *push* energy out to machines.
- Trying to share one network's wireless charging with teammates without giving them permissions. For friends to receive wireless charging from your Flux Controller, you must add them as 'Users' or 'Admins' in the Network Members tab.
FAQ
Why did my items suddenly stop charging when I went to the Nether?
Your overworld base unloaded. Make sure the Flux Plug, your actual energy generator/battery, and the Flux Controller are all located inside force-loaded chunks.
Can multiple players get wireless charging from a single Flux Controller?
Yes. A single Flux Controller will charge the inventories of every player who is added as a member of that specific Flux Network. You can add players via the 'Network Members' tab in the GUI.
Why isn't my Curio/Trinket slot item charging?
Make sure you specifically clicked and highlighted the Baubles/Curios rectangle inside the Wireless Charging tab and clicked Apply. Also, verify via JEI that the item uses standard Forge Energy (FE), RF, or TeamReborn Energy, rather than a custom magic system like Botania Mana.
Do I need to build a Flux Storage block for the Flux Controller to work?
No, a Flux Storage is not strictly required as long as your Flux Plug is attached to a generator or modded battery. However, adding a Flux Storage block to the network gives you a massive internal energy buffer so your tools can charge instantly even during power production dips.
By binding a chunk-loaded Flux Plug and Flux Controller to the same network and activating the Wireless Charging slots, you can keep all your powered gear permanently charged across any dimension.