Mekanism · Late game
Mekanism Industrial Fission Reactor & Steam Turbine Complex
This industrial complex integrates a Fissile Fuel production line with a closed-loop water-cooled Fission Reactor and a maximum-capacity Industrial Turbine. It serves as the backbone of late-game Mekanism progression, generating massive amounts of Forge Energy while producing Nuclear Waste required for Polonium, Plutonium, and Antimatter synthesis. The setup includes a hardwired fail-safe redstone circuit to prevent catastrophic nuclear meltdowns and irradiation.
- Footprint
- 35x25x20 blocks
- Power
- Over 15 MFE/t at peak burn rate (check JEI/config for exact scaling)
- Throughput
- Up to 100+ mB/t Fissile Fuel & 2,000,000+ mB/t Steam
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Fission Reactor Casing | 300 |
| Reactor Glass | 400 |
| Fission Fuel Assembly | 120 |
| Control Rod Assembly | 40 |
| Fission Reactor Port | 4 |
| Fission Reactor Logic Adapter | 2 |
| Turbine Casing | 450 |
| Structural Glass | 600 |
| Turbine Rotor | 10 |
| Turbine Blade | 20 |
| Rotational Complex | 1 |
| Pressure Disperser | 224 |
| Electromagnetic Coil | 5 |
| Saturating Condenser | 180 |
| Turbine Vent | 320 |
| Turbine Valve | 3 |
| Enrichment Chamber | 1 |
| Chemical Oxidizer | 2 |
| Chemical Dissolution Chamber | 1 |
| Chemical Infuser | 2 |
| Isotopic Centrifuge | 2 |
| Radioactive Waste Barrel | 32 |
| Ultimate Pressurized Tube | 64 |
| Ultimate Mechanical Pipe | 64 |
| Ultimate Universal Cable | 32 |
Build it step by step
1Construct the Fissile Fuel Line
Set up two parallel chemical processing chains that converge at a Chemical Infuser. First, route Uranium Ingots into an Enrichment Chamber to create Yellow Cake Uranium, then pass it into a Chemical Oxidizer to yield Uranium Oxide. Simultaneously, combine Sulfur Trioxide and Water Vapor to make Sulfuric Acid, and feed it with Fluorite into a Chemical Dissolution Chamber to produce Hydrofluoric Acid.
2Refine Uranium Hexafluoride
Pipe the Uranium Oxide and Hydrofluoric Acid into a Chemical Infuser to synthesize Uranium Hexafluoride. Route this gas directly into an Isotopic Centrifuge to spin it into Fissile Fuel. Upgrade all machines in this chain with max Speed, Energy, and Gas Upgrades to keep up with higher reactor burn rates.
3Assemble the Fission Reactor Structure
Build a hollow rectangular frame using Fission Reactor Casings (e.g., 11x11x11 or up to 18x18x18) and fill the faces with Reactor Glass. Inside, build vertical columns of Fission Fuel Assemblies in a checkerboard pattern so no two columns touch orthogonally. Top every single fuel column with a Control Rod Assembly just below the roof level.
4Configure Reactor Ports
Install four Fission Reactor Ports on the walls of the reactor. Use a Configurator (Shift + Right-Click) to set two ports to 'Input Only' (for Fissile Fuel and Water), one to 'Output Waste' (for Nuclear Waste), and one to 'Output Coolant' (for Steam).
5Erect the Industrial Turbine
Adjacent to the reactor, build a 17x17x18 frame out of Turbine Casings. Place a column of 10 Turbine Rotors in the exact center of the floor and attach 20 Turbine Blades to it. Cap the rotor with a Rotational Complex and surround that complex on the same horizontal plane with 224 Pressure Dispersers to seal the lower chamber.
6Install Coils, Condensers, and Vents
Directly on top of the Rotational Complex, place 5 Electromagnetic Coils so they touch one another. Fill the remaining empty air space in the upper chamber with Saturating Condensers. Replace the outer wall blocks and roof above the Pressure Disperser layer with Turbine Vents, leaving the frame edges intact.
7Establish the Closed-Loop Plumbing
Place three Turbine Valves on the lower turbine walls. Connect the reactor's Steam output port directly to a Turbine Valve using Ultimate Pressurized Tubes (or build the reactor and turbine ports directly touching for instant throughput). Connect a Turbine Vent to the reactor's Water input port using Ultimate Mechanical Pipes, and fill the reactor fully with an initial supply of water using Electric Pumps.
8Wire the Fail-Safe Logic Circuit
Place two Fission Reactor Logic Adapters on the reactor frame. Set the first adapter to 'Activation' and the second to 'High Temperature' or 'Insufficient Fuel/Coolant'. Wire the output of the warning adapter into a Redstone RS-NOR latch or an inverted redstone line feeding the Activation adapter so that any critical fault immediately cuts the signal and triggers a SCRAM shutdown.
How it works
The system operates on a continuous, self-regulating thermodynamic cycle. Fissile Fuel enters the Fission Reactor and undergoes nuclear fission at a player-defined burn rate, generating immense heat and converting the fuel into radioactive Nuclear Waste. The surrounding water absorbs this thermal energy and boils into high-pressure Steam, keeping the reactor core below critical damage temperatures.
The Steam is piped immediately into the lower chamber of the Industrial Turbine, where it forces the Turbine Blades to spin. The Rotational Complex translates this kinetic energy into the Electromagnetic Coils above, producing millions of Forge Energy per tick (FE/t) which is offloaded into an Induction Matrix. Simultaneously, the Saturating Condensers in the upper chamber cool the exhausted steam back into liquid water.
This condensed water is pushed out through the Turbine Vents and routed straight back into the Fission Reactor's coolant input port. Because the Saturating Condensers recover 100% of the water from the steam, the system forms a completely closed coolant loop. Once primed with water, no external pumps are required to maintain equilibrium, provided the turbine's maximum water condensation rate matches or exceeds the reactor's steam production.
Upgrades and scaling
- Convert the reactor to Sodium cooling by adding a Thermoelectric Boiler between the Fission Reactor and Industrial Turbine; this allows the reactor to run at exponentially higher burn rates using Superheated Sodium.
- Route the Nuclear Waste from the Radioactive Waste Barrels into Solar Neutron Activators to produce Polonium for an SPS (Supercritical Phase Shifter) or Isotopic Centrifuges to produce Plutonium.
- Place both the Fission Reactor and Industrial Turbine ports directly adjacent to each other without pipes or tubes to bypass pipe transfer limits completely.
Common mistakes
- Breaking a pipe or waste barrel containing Nuclear Waste, Plutonium, or Polonium—this instantly releases deadly radiation across several chunks for real-world hours. Always let barrels decay or route waste cleanly.
- Forgetting to install Saturating Condensers inside the turbine or forgetting to set the Turbine Vents to push water back into the reactor, leading to dry-boiling and an immediate meltdown.
- Placing Fission Fuel Assemblies adjacent to one another instead of in a checkerboard pattern, which drastically reduces heat efficiency and causes rapid overheating.
- Letting the Industrial Turbine's internal energy buffer (or connected Induction Matrix) completely fill up; if the turbine stops spinning, it stops condensing steam into water, backing up the reactor and causing an explosion.
FAQ
Why isn't my Industrial Turbine condensing enough water to keep the reactor full?
Check the turbine GUI to verify you have enough Saturating Condensers and Turbine Vents installed to match your Steam input rate, and ensure you are using enough Ultimate Mechanical Pipes to transfer the huge volume of water.
How do I safely dispose of Nuclear Waste without radiating my base?
Pump the waste into a bank of Radioactive Waste Barrels. Every barrel slowly deletes a small amount of waste every minute with zero radiation leak, as long as you never mine or break the barrel while it contains gas.
What should I do if my reactor accidentally melts down?
Put on a fully assembled Hazmat Suit (or a MekaSuit with Radiation Shielding Units installed), rebuild the destroyed blocks only after radiation levels drop, or use the command /mek radiation removeAll if you have admin privileges.