Mekanism · Mid game
Mekanism Complete 5x Ore Processing Factory
This complete Tier 4 Mekanism pipeline uses a chain of chemical reactions to multiply raw ore yields carefully, turning every 3 Raw Ores into 10 Ingots (or 1 Silk-Touched Ore Block into 5 Ingots). By generating its own Sulfuric Acid, Hydrogen Chloride, and Oxygen on-site via a Thermal Evaporation Plant and Electrolytic Separators, the factory runs completely autonomously once fed with water, sulfur, power, and raw ores. Building this mid-to-late game setup solves resource scarcity permanently and sets the foundation for endgame Mekanism infrastructure.
- Footprint
- 13x9x6 blocks
- Power
- ~4.5 kFE/t at full load (with Energy Upgrades)
- Throughput
- ~1.5 raw ores/sec (scales with Tier Installers)
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Thermal Evaporation Block | 36 |
| Thermal Evaporation Controller | 1 |
| Thermal Evaporation Valve | 2 |
| Electric Pump | 3 |
| Electrolytic Separator | 2 |
| Chemical Oxidizer | 1 |
| Chemical Infuser | 3 |
| Rotary Condensentrator | 1 |
| Chemical Dissolution Chamber | 1 |
| Chemical Washer | 1 |
| Chemical Crystallizer | 1 |
| Chemical Injection Chamber | 1 |
| Purification Chamber | 1 |
| Crusher | 1 |
| Enrichment Chamber | 1 |
| Energized Smelter | 1 |
| Basic Pressurized Tube | 24 |
| Basic Mechanical Pipe | 16 |
| Basic Logistical Transporter | 16 |
| Basic Universal Cable | 32 |
| Gas Upgrade | 16 |
| Energy Upgrade | 64 |
| Speed Upgrade | 64 |
| Configurator | 1 |
Build it step by step
1Build the Main Processing Line
Place the 7 core ore processing machines in a straight row from left to right: Chemical Dissolution Chamber, Chemical Washer, Chemical Crystallizer, Chemical Injection Chamber, Purification Chamber, Crusher, Enrichment Chamber, and finally the Energized Smelter. Open each machine's GUI, enable Auto-Eject in the Side Config tab, and set their right side to Output and left side to Input for their respective items or gases.
2Set Up Water and Oxygen Supply
Place three Electric Pumps over an infinite water source behind your main line. Pipe water using Mechanical Pipes directly into the Chemical Washer, an Electrolytic Separator, and a Rotary Condensentrator (set to Decondensentrating mode to create Water Vapor). Configure the Electrolytic Separator to dump excess Hydrogen and send its Oxygen output via Pressurized Tubes to both the Purification Chamber and your upcoming Sulfuric Acid line.
3Construct the Sulfuric Acid Sub-Line
Place a Chemical Oxidizer and two Chemical Infusers behind the Dissolution Chamber. Feed Sulfur Dust into the Chemical Oxidizer to produce Sulfur Dioxide (SO2), and pipe that SO2 along with Oxygen into the first Chemical Infuser to create Sulfur Trioxide (SO3). Pipe the SO3 and Water Vapor from your Rotary Condensentrator into the second Chemical Infuser to create Sulfuric Acid, then route the acid directly into the Chemical Dissolution Chamber.
4Build the Brine and Hydrogen Chloride Sub-Line
Construct a 4x4x3 hollow multiblock Thermal Evaporation Plant using Thermal Evaporation Blocks, 1 Controller, and 2 Valves. Pump water into one valve, place Solar Panels on the top corners (or pipe heat from a Resistive Heater), and pump the resulting Brine out of the second valve into a second Electrolytic Separator. Route the Chlorine gas from this separator and Hydrogen gas from your first water separator into a third Chemical Infuser to produce Hydrogen Chloride, then pipe it into the Chemical Injection Chamber.
5Install Upgrades and Connect Power
Run Universal Cables along the back or bottom of every machine in the setup and connect them to a strong mid-game power source like a Gas-Burning Generator running on Ethylene. Install 8 Energy Upgrades and 8 Gas Upgrades into the Chemical Injection Chamber, Purification Chamber, and Chemical Dissolution Chamber first, as gas consumption is massive without Gas Upgrades. Add Speed Upgrades evenly across the line once your power grid is stable.
6Configure Ore Input and Ingot Output
Place an Input Chest next to the Chemical Dissolution Chamber and connect it with a Logistical Transporter configured to pull with your Configurator. Place your Output Chest to the right of the Energized Smelter to catch the finished ingots. Drop a stack of Raw Ore into the input chest and verify via machine GUIs that slurry, crystals, shards, clumps, and dusts move smoothly down the chain.
How it works
Mekanism's Tier 4 ore processing works by breaking raw ore down to a chemical slurry before reconstructing it into solid items that pass through the earlier tiers of processing. In the first phase, the Chemical Dissolution Chamber combines Raw Ore with Sulfuric Acid to generate Dirty Ore Slurry. The Chemical Washer uses water to rinse this into Clean Ore Slurry, which the Chemical Crystallizer then solidifies into Ore Crystals. For every 3 Raw Ores inserted (or 1 Silk-Touched Ore block), this chemical front-end produces 10 Ore Crystals (5 for a single ore block).
Once the Ore Crystals are formed, they enter the standard Tier 3, Tier 2, and Tier 1 solid processing line. The Chemical Injection Chamber injects Hydrogen Chloride gas into each Crystal to create an Ore Shard. The Purification Chamber uses Oxygen to turn Shards into Clumps, the Crusher smashes Clumps into Dirty Dust, the Enrichment Chamber cleans Dirty Dust into pure Ore Dust, and the Energized Smelter finally smelts the dust into Ingots at a 1:1 ratio.
Because Sulfuric Acid and Hydrogen Chloride require three distinct gases and one fluid to synthesize, separating the factory into a main horizontal processing spine with three modular gas sub-lines in the back prevents pipe spaghetti. Mekanism's Pressurized Tubes cannot mix gases, so dedicating individual Chemical Infusers to Sulfur Trioxide, Sulfuric Acid, and Hydrogen Chloride keeps the chemical flows cleanly isolated.
Upgrades and scaling
- Apply Basic, Advanced, Elite, and Ultimate Tier Installers to the solid processing machines (Chemical Injection Chamber through Energized Smelter) to convert them into Factories with up to 9 parallel processing slots, eliminating the bottleneck caused by fast chemical slurry production.
- Automate infinite Sulfur Dust production by feeding Cobblestone into a Crusher (for Gravel), then a Purification Chamber (for Flint), then a Crusher (for Gunpowder), and finally a Chemical Injection Chamber with Hydrogen Chloride to turn Gunpowder into Sulfur Dust.
- Add a Quantum Entangloporter or a dedicated Resistive Heater connected to the Thermal Evaporation Plant's valve so Brine production stays at maximum temperature through the night.
Common mistakes
- Feeding Silk-Touched Ore Blocks and Raw Ores into the Chemical Dissolution Chamber at the same time; Raw Ores process in batches of 3 while Ore Blocks process 1 at a time, which leaves leftover slurry volumes inside the Chemical Crystallizer that lock up the machine until cleared with a Gauge Dropper.
- Forgetting to install Gas Upgrades into the Chemical Dissolution Chamber, Chemical Injection Chamber, and Purification Chamber, which causes your Sulfuric Acid and Hydrogen Chloride buffers to drain almost instantly.
- Not setting the Electrolytic Separators to 'Dump Excess' on the byproduct gas tank (Sodium for the Brine separator, Hydrogen for the Water separator), which halts Oxygen and Chlorine production as soon as the secondary tank fills up.
- Connecting a single Logistical Transporter line to multiple mixed ore chests without activating Logistical Sorter 'Size Mode', resulting in less than 3 Raw Ores of a given metal entering the Dissolution Chamber and jamming it.
FAQ
Why is my Chemical Crystallizer stuck with a small amount of Clean Slurry inside?
The Crystallizer requires a specific amount of slurry per crystal (check JEI for exact mB values). If you switch ore types before a batch of 3 Raw Ores finishes, leftover slurry gets trapped. Use a Gauge Dropper on the internal tank inside the GUI to extract or shift-click to void the leftover slurry.
Should I process Raw Ores or Silk-Touched Ore Blocks in this setup?
Always mine with Fortune III and process Raw Ores. While 1 Ore Block yields 5 ingots and 3 Raw Ores yield 10 ingots (3.33x per raw ore), Fortune III yields far more than 1.5 raw ores per block mined on average, giving you dramatically more ingots per ore vein.
Why is my Sulfuric Acid production not keeping up with the Dissolution Chamber?
The Chemical Dissolution Chamber consumes Sulfuric Acid per operation unless you install all 8 Gas Upgrades, which vastly reduces gas usage. Also make sure your Rotary Condensentrator and Electric Pump have Speed Upgrades so Water Vapor never starves the final Chemical Infuser.