Refined Storage · Automation · Advanced

How to Keep Items in Stock Automatically (Interface, Exporter, & Requestify)

On-demand autocrafting is great, but waiting for your network to smelt hundreds of processors or glass blocks for a massive late-game project wastes valuable time. This guide covers three distinct methods to passively maintain a set quantity of items in your Refined Storage network at all times. By automating your baseline stock, your heavy crafting components will always be ready for instant withdrawal.

What you need

  • An existing, powered Refined Storage network (Controller, Grid, Storage Disks/Blocks)
  • A working autocrafting setup ( Pattern Grid, Crafters, and encoded Patterns for the items you want to stock)
  • Crafting Upgrade (Required for all base-mod stocking methods)
  • Method 1 items: Interface and External Storage
  • Method 2 items: Exporter, Detector, and a single chest or barrel
  • Method 3 items (Optional Addon): Requester from the Refined Storage: Requestify addon
  • Cables to connect your new devices

Step by step

  1. 1Verify Your Base Autocrafting

    Before setting up passive stock limits, ensure your network can already craft the target item on demand. Open your Pattern Grid, encode the recipe onto a blank Pattern, and place it inside a connected Crafter. Request a single unit of the item from your main Grid to confirm the system has all raw materials and proper machine routing.

    Tip: You cannot passively stock an item if the network does not know how to craft it first.

  2. 2Method 1: Place an Interface and External Storage

    The cleanest base-mod method for keeping up to a few stacks in stock uses an Interface. Place an Interface connected to your network, then attach an External Storage cable directly against that Interface. Do not place any chests; the External Storage must read the Interface itself.

    Tip: Set the External Storage priority higher than your main Disk Drives so your network extracts from the Interface buffer first before draining your main storage.

  3. 3Configure the Interface Stock Limits

    Open the Interface GUI and insert a Crafting Upgrade into the upgrade slots on the right. In the top export preview slots, click with the item you want to keep in stock (for example, Quartz Enriched Iron) and set the exact quantity you want up to a single stack per slot. The Interface will immediately begin requesting crafts until its internal bottom storage slots match your requested top slots.

    Tip: You can check JEI for the exact recipe of the Crafting Upgrade, which usually requires a basic Upgrade, a Construction Core, and a Crafting Table.

  4. 4Method 2: Setup Bulk Stocking with an Exporter

    If you need thousands of an item stocked, the Interface's single-stack-per-slot limit is too small, so use an Exporter loop instead. Place a standard Chest or Barrel near your network. Attach an External Storage to one side of the chest so the network can see its contents, and attach an Exporter to another side of the same chest.

  5. 5Install the Crafting Upgrade in the Exporter

    Open the Exporter GUI, click your target item into the filter slot, and insert a Crafting Upgrade into the right-hand panel. Set the Exporter's redstone mode to 'Only work with redstone signal'. Without a limit, the Exporter will endlessly craft the item until your chest overflows and your raw resources are completely drained.

    Tip: Also set the External Storage on the chest to 'Extract Only' mode so normal network deposits do not accidentally fill this dedicated buffer chest.

  6. 6Cap the Exporter with a Detector

    Place a Refined Storage Detector directly adjacent to the Exporter so its redstone signal powers the Exporter block. Open the Detector, set its filter to your target item, enter your desired total stock threshold (for example, 1000 Glass), and select the 'Emit signal when under amount' mode. Now, the Exporter only crafts and pushes items into the chest when your total network count drops below 1000.

    Tip: If the Detector is right on the threshold and flickering rapidly, add Speed Upgrades to the Exporter to buffer the items faster.

  7. 7Method 3: The Requestify Addon (Best for Large Bases)

    If your modpack includes the 'Refined Storage: Requestify' addon, you can bypass the physical loop contraptions entirely. Craft a Requester block and connect it anywhere along your Refined Storage cable network. No External Storages, Detectors, or Crafting Upgrades are needed for this block.

    Tip: Check JEI by searching '@requestify' to see if you have this addon installed.

  8. 8Configure the Requester

    Open the Requester GUI, place your target item into the filter slot, and type the exact numerical amount you wish to keep in stock into the text box. When the network has fewer items than this number, the Requester automatically dispatches a standard crafting job straight to your internal disks. It neatly pauses itself if your system runs out of raw ingredients.

How it works

In base Refined Storage, storage disks are entirely passive; they simply hold data and lack the logic to request items for themselves. To automate stocking, you have to trick the network into thinking an external block requires an item. This is the core purpose of the Crafting Upgrade. When inserted into an Exporter or Interface, it alters the device's logic from 'pull this item from storage' to 'if this item is missing from storage, tell a Crafter to make it directly for me'.

In Method 1 and Method 2, you create a closed visibility loop using External Storage. The Interface or Exporter uses its Crafting Upgrade to demand items into a holding inventory (either the Interface's internal buffer or a physical chest). Because an External Storage is attached to that exact same holding inventory, those newly crafted items are instantly projected back into your main Grid's item count.

The Requestify addon (Method 3) cuts out the physical middleman. Instead of faking an export and reading it back with an External Storage, the Requester acts as a simulated player. It periodically polls the Controller for the total network count of an item and submits a background crafting ticket directly into your main storage disks whenever a deficit is detected.

Common mistakes

  • Putting an Exporter with a Crafting Upgrade on an External Storage chest without a Detector limit. Because the Exporter pulls from the network and puts the item right back into the network via the chest, it creates an infinite loop that will eat all your raw materials and consume excessive power.
  • Forgetting the Crafting Upgrade inside the Interface or Exporter. Without this specific upgrade, the devices will simply pull existing items out of your main storage disks until they are empty, rather than triggering new crafts.
  • Using the Interface method for massive bulk items like Cobblestone or Glass. An Interface only holds one stack per configured slot, meaning you waste valuable filter slots for a very small buffer.
  • Leaving the External Storage on your buffer chest in 'Insert and Extract' mode during Method 2. When you dump items into your Grid, they might go into the buffer chest instead of your Disk Drives, breaking the organization of your storage.

FAQ

Why is my Interface or Exporter not crafting anything even with the Crafting Upgrade installed?

Check your Crafting Monitor. Usually, a prerequisite raw material is missing, the Crafter holding the pattern is facing the wrong direction, or a previous broken crafting job is clogging the queue.

Does passive autocrafting cause server or FPS lag?

The Exporter + Detector method can cause minor lag if you have dozens of them constantly checking inventory counts every tick. For large-scale bases, the Requestify addon is much friendlier on performance because it waits between crafting checks.

Can I keep fluids in stock using these methods?

Yes. Both the Exporter and Detector have a Fluid mode toggle inside their GUIs. Pair them with a Fluid Grid, fluid patterns, and an external Fluid Tank read by an External Storage in Fluid mode.

Why does my network say I have double the items when using the Interface method?

You do not actually have double. The items sitting inside the Interface's bottom export slots are being read by the External Storage and displayed in your Grid. When you pull them out of the Grid, you are pulling them directly out of the Interface.

By combining Crafting Upgrades with External Storage loops—or by utilizing the Requestify addon—you can transition your Refined Storage network from slow on-demand crafting to an instant, self-replenishing resource factory.

More Refined Storage guides

Refined Storage · Getting startedRefined Storage Getting Started Guide: Your First Digital Storage NetworkTired of digging through dozens of disorganized chests to find a single item? In this guide, you will build your very first digital storage network using Refined Storage, allowing you to store thousands of items on compact storage disks and access everything from a single screen. Setting up this core network lays the essential foundation for massive storage capacity and future base automation.Beginner6 steps
Refined Storage · ExplainedStorage Priority, Disks, and External Storage ExplainedProperly managing your Refined Storage network prevents your storage disks from overflowing with cobblestone and unstackable mob drops. In this guide, you will learn how to separate items from fluids, attach massive external inventories, and use the priority system to dictate exactly where every item goes. Mastering these mechanics ensures your storage system remains organized, scalable, and lag-free from early game to end game.Beginner7 steps
Refined Storage · AutomationHow to Use Importers, Exporters, and Upgrades: Complete Item Logistics GuideMastering Importers, Exporters, and their respective upgrades allows you to transform a static Refined Storage system into an automated logistics powerhouse. In this guide, you will learn how to automatically pull resources from external machines, push ingredients into processing blocks, and fine-tune transfer rates and filtering logic. Proper logistics automation eliminates manual inventory management and keeps your base running continuously.Intermediate7 steps
Refined Storage · Setup guideRefined Storage Auto-Crafting Guide: Patterns, Crafters, and Processing RecipesSetting up auto-crafting in Refined Storage transforms your base from a basic digital chest into a fully automated factory capable of producing complex items on demand. In this guide, you will learn how to program Crafting and Processing Patterns, configure Crafters for both internal recipes and external machines, and manage your entire automation network using the Crafter Manager.Intermediate8 steps
Refined Storage · Setup guideHow to Set Up Wireless Grids and Long-Range Network TransmittersTethering yourself to a stationary Grid is fine for early bases, but expanding across dimensions requires wireless freedom. This guide teaches you how to set up local wireless access using Wireless Transmitters and how to bridge distant outposts or alternate dimensions back to your main Refined Storage Controller using Network Transmitters and Receivers.Intermediate6 steps
Refined Storage · AutomationWorld Automation Guide: Constructors, Destructors, and DetectorsMastering world interaction in Refined Storage allows you to transition from simple digital chests to fully autonomous resource factories. In this guide, you will learn how to use Constructors and Destructors to automatically place and break blocks in the physical world, and how to govern your setups using the Detector to prevent storage overflow. This is essential for automating tasks like cobblestone generation, concrete hardening, and living wood creation without risking server lag from excessive item production.Intermediate8 steps