Refined Storage · Setup guide · Intermediate

Refined Storage Auto-Crafting Guide: Patterns, Crafters, and Processing Recipes

Setting up auto-crafting in Refined Storage transforms your base from a basic digital chest into a fully automated factory capable of producing complex items on demand. In this guide, you will learn how to program Crafting and Processing Patterns, configure Crafters for both internal recipes and external machines, and manage your entire automation network using the Crafter Manager.

What you need

  • An active Refined Storage network (Controller, Disk Drive with Storage Disks, and a stable Forge Energy power source)
  • Pattern Grid
  • Patterns (blank)
  • Crafters (at least two for basic setups)
  • Crafter Manager (optional, for central organization)
  • Importers and Cables
  • Speed Upgrades and Stack Upgrades (optional, for faster item extraction)
  • An external processing machine (such as a Vanilla Furnace or any mod-added Smelter, Crusher, or Pulverizer)

Step by step

  1. 1Connect the Pattern Grid

    Place a Pattern Grid adjacent to your existing Refined Storage network or connect it using Cables. Open its GUI and place a stack of blank Patterns into the top-right slot above the arrow. This specific grid allows you to encode item blueprints onto blank Patterns without actually consuming the crafting ingredients.

    Tip: You can also access your normal storage items from the Pattern Grid, allowing it to fully replace a standard Grid or Crafting Grid if you want to save space.

  2. 2Encode a Standard Crafting Pattern

    Ensure the 'Processing' checkbox on the right side of the crafting matrix is unchecked. Look up the item you want to automate in JEI (for example, a Piston), click the item, and shift-click the small '+' button in the JEI recipe preview to auto-fill the 3x3 matrix. Click the down-arrow button on the right to imprint the recipe onto a blank Pattern, creating an encoded Pattern in the bottom-right slot.

    Tip: enable the 'Exact' checkbox only if your recipe strictly requires items with specific NBT data or durability; otherwise, leave it unchecked so the system can substitute valid OreDictionary or Tag equivalents like different wood planks.

  3. 3Set Up a Crafter for Internal Recipes

    Place a Crafter anywhere along your Refined Storage network cables. Because standard crafting happens instantly inside the digital network, the orientation of this specific Crafter does not matter. Open the Crafter and place your newly encoded Crafting Pattern into one of its nine internal slots.

    Tip: If you need to automate prerequisite items (like Wood Planks and Cobblestone slabs), encode patterns for those too and place them in the same Crafter or any other connected Crafter.

  4. 4Encode a Processing Pattern for Machines

    Return to the Pattern Grid and check the 'Processing' box, which changes the layout into two 3x3 grids: Inputs on the left, Outputs on the right. To automate making Silicon, place Certus Quartz or Nether Quartz in the left input grid, and place Silicon in the right output grid (or use the JEI '+' transfer button while viewing the smelting recipe). Click the encode arrow to create a Processing Pattern.

    Tip: You can manually adjust item stack sizes in a Processing Pattern by clicking the slots in the Pattern Grid; this is very useful for recipes that require multiple items per operation, like alloying.

  5. 5Attach a Crafter to an External Machine

    Place your external smelting machine (such as an powered furnace) and place a new Crafter directly against it. Ensure the front face of the Crafter—the side with the dark square hole/chute texture—is pointing directly into the machine. Insert your encoded Silicon Processing Pattern into this Crafter.

    Tip: Hold Shift while placing the Crafter to make its front chute point directly toward you, or use a Wrench to rotate it after placement.

  6. 6Configure Machine Sides and Return Import

    Attach a Refined Storage Importer to the output side of your external machine and connect both the Importer and the Crafter back to your main network using Cables. If you are using a Vanilla Furnace, the Crafter must point into the top face to insert raw materials, fuel must be supplied via the side face (using an Exporter), and the Importer must be attached to the bottom face to pull finished items. If you are using a modded machine, open its side-configuration GUI and set the face touching the Crafter to 'Input' and the face touching the Importer to 'Output'.

    Tip: Place a Stack Upgrade and three Speed Upgrades inside the Importer so finished items return to the storage system immediately.

  7. 7Organize with the Crafter Manager

    Connect a Crafter Manager to your network to manage all your patterns from a single screen. Open each individual Crafter placed around your base and verify the name displayed at the top of its GUI; if it points into a machine, it will automatically adopt that machine's block name. For standalone Crafters doing standard crafting, click the name field at the top of the Crafter GUI and type a custom category like 'Woodworking' or 'Redstone Components' so they group neatly inside the Crafter Manager.

    Tip: The Crafter Manager has a search bar that filters either by the Crafter's container name or by the output items of the patterns inside.

  8. 8Order and Monitor Crafting Jobs

    Open any Grid, search for the item you encoded, and look for the 'Craft' tag where the item count usually sits. Hold Ctrl and Shift while clicking the item (or middle-click it) to open the crafting request screen, type the desired quantity, and click 'Start'. You can open a Crafting Monitor connected to your network to watch the step-by-step progress or cancel stuck jobs.

How it works

Refined Storage handles auto-crafting through two completely different logic gates depending on whether the Pattern is encoded as a normal 'Crafting' recipe or a 'Processing' recipe. When you request a normal Crafting recipe, the network checks if all raw ingredients exist in your Storage Disks, deducts them virtually, and uses the internal Crafter to assemble the final product immediately inside the digital space without ever placing an item into the physical world.

Processing Patterns work on an asynchronous 'push-and-wait' logic. A Crafter holding a Processing Pattern knows only one action: when a job is ordered, it physically pushes the required input items out through its front chute into whatever inventory it is facing. From that exact moment, the Crafter goes idle and simply waits for the specified output item to enter the Refined Storage network by any means.

Because the Crafter only handles the input phase of a Processing recipe, the Importer is strictly required to close the feedback loop. Once your external machine finishes smelting or crushing the material, the Importer sucks the finished product out of the machine and dumps it back into the network. The controller sees that the awaited item has arrived, marks that step of the crafting tree as complete, and either delivers the item to you or sends it to the next Crafter in a multi-step recipe chain.

Common mistakes

  • Pointing the Crafter in the wrong direction: For Processing Patterns, the front face of the Crafter must directly touch the target machine (or an intermediate inventory like a chest). If it points into air or a cable, the crafting job will freeze because it has nowhere to push the ingredients.
  • Forgetting to configure Vanilla Furnace sidedness: A Vanilla Furnace only accepts smelting inputs from the TOP block face and only allows product extraction from the BOTTOM block face. Pointing a Crafter into the side of a Vanilla Furnace will jam the system by putting raw iron into the fuel slot.
  • Leaving 'Processing' checked for standard 3x3 recipes: If you accidentally encode a normal crafting table recipe as a Processing Pattern, the Crafter will try to dump raw planks and sticks into an external inventory instead of crafting the tool internally.
  • Chaining Crafters incorrectly: While you can point one Crafter directly into the back of another Crafter to share a single machine's input face, doing this in a closed circle will cause infinite loops and network lockups. Always ensure the final Crafter in a chain points into a valid machine inventory.

FAQ

Why is my crafting job stuck on 'Machine does not accept item' or 'Crafting' forever?

This happens during Processing jobs when the Crafter cannot push items into the attached machine (usually because the machine's input slot is full or its side configuration is locked), or because you forgot to attach an Importer to pull the finished items back into the network.

How do I speed up slow auto-crafting jobs?

Insert Speed Upgrades directly into the upgrade slots on the right side of the Crafter's GUI. For Processing recipes, you also need to upgrade the external machine itself and put Speed and Stack Upgrades inside the attached Importer.

How can I connect multiple Crafters to a single machine face if I run out of room beyond 9 patterns?

Place your first Crafter pointing directly into the machine, then place a second Crafter behind the first one so its front chute points directly into the back of the first Crafter. They will daisy-chain and share the same target inventory.

What do the redstone modes inside a Processing Crafter do?

In complex factories where a single machine requires strict batch control, you can set a Crafter to 'Redstone pulse inserts next set', which locks the Crafter after pushing one batch of items until an external redstone pulse unlocks it for the next batch.

By mastering standard Crafting Patterns for instant internal assembly and pairing Processing Patterns with Importers for external machines, you can automate every resource chain in your modpack from a single Refined Storage Grid.

More Refined Storage guides

Refined Storage · Getting startedRefined Storage Getting Started Guide: Your First Digital Storage NetworkTired of digging through dozens of disorganized chests to find a single item? In this guide, you will build your very first digital storage network using Refined Storage, allowing you to store thousands of items on compact storage disks and access everything from a single screen. Setting up this core network lays the essential foundation for massive storage capacity and future base automation.Beginner6 steps
Refined Storage · ExplainedStorage Priority, Disks, and External Storage ExplainedProperly managing your Refined Storage network prevents your storage disks from overflowing with cobblestone and unstackable mob drops. In this guide, you will learn how to separate items from fluids, attach massive external inventories, and use the priority system to dictate exactly where every item goes. Mastering these mechanics ensures your storage system remains organized, scalable, and lag-free from early game to end game.Beginner7 steps
Refined Storage · AutomationHow to Use Importers, Exporters, and Upgrades: Complete Item Logistics GuideMastering Importers, Exporters, and their respective upgrades allows you to transform a static Refined Storage system into an automated logistics powerhouse. In this guide, you will learn how to automatically pull resources from external machines, push ingredients into processing blocks, and fine-tune transfer rates and filtering logic. Proper logistics automation eliminates manual inventory management and keeps your base running continuously.Intermediate7 steps
Refined Storage · Setup guideHow to Set Up Wireless Grids and Long-Range Network TransmittersTethering yourself to a stationary Grid is fine for early bases, but expanding across dimensions requires wireless freedom. This guide teaches you how to set up local wireless access using Wireless Transmitters and how to bridge distant outposts or alternate dimensions back to your main Refined Storage Controller using Network Transmitters and Receivers.Intermediate6 steps
Refined Storage · AutomationWorld Automation Guide: Constructors, Destructors, and DetectorsMastering world interaction in Refined Storage allows you to transition from simple digital chests to fully autonomous resource factories. In this guide, you will learn how to use Constructors and Destructors to automatically place and break blocks in the physical world, and how to govern your setups using the Detector to prevent storage overflow. This is essential for automating tasks like cobblestone generation, concrete hardening, and living wood creation without risking server lag from excessive item production.Intermediate8 steps
Refined Storage · PowerRefined Storage Power Consumption and Security Manager GuideManaging a rapidly expanding Refined Storage network requires a firm grasp on power scaling to prevent sudden system blackouts. This guide breaks down how Forge Energy (FE) consumption scales with your connected devices, how to optimize your idle power drain, and how to lock down your priceless storage against unauthorized players on multiplayer servers using the Security Manager.Intermediate7 steps