Refined Storage · Explained · Beginner
Storage Priority, Disks, and External Storage Explained
Properly managing your Refined Storage network prevents your storage disks from overflowing with cobblestone and unstackable mob drops. In this guide, you will learn how to separate items from fluids, attach massive external inventories, and use the priority system to dictate exactly where every item goes. Mastering these mechanics ensures your storage system remains organized, scalable, and lag-free from early game to end game.
What you need
- A basic Refined Storage network (Controller, Grid, Fluid Grid, and power source)
- Disk Drive
- Storage Disks (1k, 4k, 16k, or 64k) and Fluid Storage Disks
- External Storage cables
- Chests, Barrels, or a Drawer Controller from a drawer mod
- Disk Manipulator (optional, for moving items after changing priorities)
- Cable (for connecting devices)
Step by step
1Differentiate Item and Fluid Disks
Right-click your Disk Drive to open its interface and insert standard Storage Disks alongside at least one Fluid Storage Disk. Unlike some other storage mods, Refined Storage counts exact item quantities rather than limiting you by item types, meaning a 1k Storage Disk holds exactly 1,000 individual items regardless of whether they stack. Standard disks only hold items, while Fluid Storage Disks exclusively store liquids measured in millibuckets.
Tip: You can place both item and fluid disks into the exact same Disk Drive block, or separate them into different Disk Drives for easier filtering.
2Connect an External Storage to a Bulk Inventory
Place a large inventory in the world, such as a double chest or a Drawer Controller connected to a wall of storage drawers. Attach an External Storage cable directly against that chest or controller, then connect it back to your main Refined Storage network using standard Cables. Once connected, every single item inside that external container will immediately appear inside your Grid.
Tip: Hooking a single External Storage up to a Drawer Controller lets your network read hundreds of drawers while only using the power of one cable.
3Set Up Your Network Priorities
Right-click the External Storage cable to open its GUI, locate the Priority button on the right side, and set its value to a positive number like 10. Next, open your Disk Drive GUI and leave its Priority at the default 0 (or set it to a negative number). When you insert items into your Grid, the network will always attempt to send them to the storage container with the highest priority number first.
Tip: Hold Shift while clicking the plus or minus buttons in the Priority window to change the values in larger increments.
4Filter Your Storage Locations
Open the GUI of your External Storage or Disk Drive and check the Whitelist/Blacklist button on the left side. By default, devices are set to Blacklist with an empty filter, meaning they accept everything. If you want a specific chest or Disk Drive to only accept ores, toggle the mode to Whitelist and drag sample ores from JEI directly into the filter slots.
Tip: Notice the Item/Fluid toggle button inside the Disk Drive and External Storage interfaces; switch it to Fluid mode if you are hooking an External Storage up to a fluid tank.
5Configure Access Modes (Insert and Extract)
In the left sidebar of your Disk Drive or External Storage interface, look for the Access Mode button, which defaults to 'Insert and Extract'. If you are retiring an old chest or disk and want to empty it out naturally, change this setting to 'Extract Only'. This allows you and your crafting machines to pull items out, while blocking any new items from being put back inside.
Tip: Setting an External Storage on a trash can to 'Insert Only' with a very low priority (like -100) creates a dangerous catch-all void—only do this if you whitelist specific junk items!
6Handle Overflow and Voiding Excess
If you use a drawer system via External Storage for bulk items like cobblestone, avoid filling your digital disks when a drawer gets full. Instead of handling voiding inside Refined Storage, craft a void upgrade from your drawer mod and install it directly into the storage drawer itself. Because the External Storage has a higher priority than your Disk Drive, excess cobblestone will route to the drawer and be safely deleted by the drawer's upgrade instead of spilling into your disks.
Tip: If your drawer mod requires drawers to be locked so they remember their assigned item when empty, lock them before connecting the External Storage.
7Defragment Items Using a Disk Manipulator
Changing priorities only affects newly inserted items; cobblestone already sitting on your Storage Disks will not automatically jump into your newly attached External Storage. To fix this, craft and place a Disk Manipulator onto your network, take the Storage Disk out of your Disk Drive, and place it into the input slot of the Disk Manipulator. Set the manipulator's mode to transfer items from the disk into the network, and it will rapidly pump all contents off the disk and re-sort them according to your new priority rules.
Tip: Put Speed and Stack Upgrades into the Disk Manipulator to move tens of thousands of items in just a few seconds.
How it works
Refined Storage uses a flat counting system for its disks rather than a byte-and-type algorithm. A 4k Storage Disk holds 4,000 items total—whether that is 4,000 pieces of dirt or 4,000 unique enchanted swords with complex NBT data. Because unstackable items only take up 1 unit of space each, disks are incredible for storing varied loot, tools, and miscellaneous crafting components, whereas bulk farm outputs like cobblestone or iron ingots will quickly eat up your disk capacity.
The Priority system is the traffic controller that solves this bulk problem. Whenever an item enters the network—whether you shift-click it into a Grid or pull it in via an Importer—the Controller evaluates all connected storage locations from the highest priority number to the lowest. It checks if a storage location has space and passes any whitelist/blacklist filters. If your Drawer Controller's External Storage is set to Priority 10 and your Disk Drive is at Priority 0, the network always checks the drawers first.
Item and fluid inventories operate on separate logical channels within the same cable network. A standard Grid only displays items, while a Fluid Grid only displays fluids, even if both types of disks reside in the exact same Disk Drive. When using an External Storage on a fluid tank (such as a tank from another mod), you must manually toggle the External Storage interface from Item mode to Fluid mode so the network knows to query the block's fluid capability rather than its item inventory.
Common mistakes
- Putting an External Storage on every single drawer in a wall instead of using a single External Storage on the Drawer Controller. This wastes cables, consumes extra RF/FE power, and can cause severe server lag because the network reads overlapping inventories.
- Forgetting to lock storage drawers before connecting them at high priority. If an unlocked drawer becomes completely empty, the Refined Storage network sees it as an open slot for ANY item, which will quickly scramble your organized drawer wall with random items.
- Assuming that changing a priority number automatically moves existing items. Priority is only evaluated at the moment an item is inserted into the network; you must manually extract and re-insert items (or use a Disk Manipulator) to reorganize existing storage.
- Using Storage Disks to store millions of unstackable armor pieces from a mob farm. Even though disks hold single items efficiently, storing thousands of items with heavy NBT data inside a single chunk can corrupt your player data or crash the world—always filter and void useless mob gear at the farm before it enters your network.
FAQ
Why can I not see my fluids in the Crafting Grid?
Standard Grids and Crafting Grids only display items. To view and extract liquids by bucket, you must craft and connect a dedicated Fluid Grid.
What happens if two storage devices have the exact same priority?
If two valid storage locations share the same priority number, the network usually fills the one that already contains a stack of that item, or defaults to the device that was connected or loaded first. To ensure predictable behavior, always give distinct priority numbers to different storage tiers.
Should I use Storage Blocks or Storage Disks?
Storage Disks are almost always better because eight disks fit into a single Disk Drive block and can be easily swapped into a Disk Manipulator. Storage Blocks (the full-block version of disks) must be placed in the world individually, though they can be broken and moved while keeping their contents.
Why is my External Storage on a fluid tank not working?
Open the External Storage GUI and look at the left sidebar for the Item/Fluid toggle button. By default, External Storage looks for item slots; you must click that button to switch it to Fluid mode.
By combining high-priority External Storage on bulk containers with standard-priority Disk Drives for general items, you create a self-sorting Refined Storage network that never runs out of disk space.