Oritech · Automation · Intermediate

Logistics & Automation: Pipes, Wrench Config, and Drones Explained

Mastering Oritech's logistics is essential for transitioning from simple manual processing to a fully automated, lag-free factory. In this guide, you will learn how to build and configure the mod's single-tier cached pipe networks for items, fluids, and energy, as well as how to deploy Drone transport systems to haul resources from remote outposts back to your main hub.

What you need

  • Wrench (Oritech)
  • Item Pipes, Fluid Pipes, and Energy Pipes
  • Basic processing machines (such as a Powered Furnace, Assembler, or Foundry)
  • Outpost extractors (such as a Bedrock Extractor or Oil Pump setup)
  • Drone Bay / Drone Ports and Transport Drones (check EMI or the in-game Oracle Index for exact crafting recipes)
  • A reliable power generation source (e.g., Big Solar Panels or biofuel generators)

Step by step

  1. 1Craft Your Logistics Toolkit

    Before laying down infrastructure, craft an Oritech Wrench alongside a healthy supply of Item Pipes, Fluid Pipes, and Energy Pipes. Unlike many other tech mods, Oritech features only a single tier for each pipe type. These pipes have high base transfer speeds out of the box, meaning you will never need to rip up your factory floors later to upgrade tiers.

    Tip: Install EMI or the Oracle Index mod to quickly view the exact metal and plastic requirements for pipes and drones.

  2. 2Route Energy Pipes to Machines

    Start by running Energy Pipes from your generators or energy storage blocks to the power inputs of your multiblock machines, such as the Powered Furnace or Assembler. The pipes will automatically snap to valid energy receptor ports on the multiblocks. Because the network is cached, running one continuous power backbone is much better than building dozens of isolated lines.

    Tip: If a larger multiblock machine requires a specific port for energy, look for the distinct socket texture on the machine's casing or use an Energy Acceptor where applicable.

  3. 3Configure Item and Fluid Extraction with the Wrench

    Place Item Pipes or Fluid Pipes between your source inventories (like chests or fluid tanks) and your processing machines. By default, pipes act as passive conduits and will not pull contents automatically. Equip your Wrench and right-click the specific connection joint where the pipe meets the source block to toggle it into Extraction mode. You will see the visual model of the pipe joint change to indicate it is actively pulling.

    Tip: Aim directly at the collar connecting the pipe to the inventory, rather than the center of the pipe block, to ensure you toggle the extraction state instead of breaking or disconnecting the pipe.

  4. 4Isolate Parallel Pipe Runs

    When building compact setups with multiple machines side-by-side, parallel Item or Fluid Pipes of the same type will naturally try to connect to one another. To keep different item lines or fluid types from mixing, use the Wrench on the middle connection between two adjacent pipes to sever the link. This forces the network to recalculate its cache, keeping your parallel lines strictly separated.

  5. 5Establish a Remote Resource Outpost

    Locate a naturally generated resource deposit far from your base, such as an oil well or a deep resource node for a Bedrock Extractor. Set up your extraction machine at the site along with local power generation. Use a short run of Item or Fluid Pipes configured with your Wrench to pull the raw outputs from the extractor into a local buffer storage or directly into a Drone Bay.

    Tip: Renewable biofuel generators or Big Solar Panels work great for keeping remote outposts self-sufficient without needing long power cables.

  6. 6Construct Sending and Receiving Drone Ports

    Build a Drone Bay (or Drone Port, depending on your version's exact naming in EMI) at your remote outpost and another one at your central factory hub. Ensure both ports have a clear vertical line of sight to the sky so the drones can take off and land without colliding with roofs or trees. Connect an Energy Pipe to the ports so they can charge and operate the drones.

  7. 7Link the Ports and Deploy the Drone

    Place your crafted Drone into the sending port at your remote outpost. Use your Wrench or the port's configuration tool to bind the outpost's sending coordinate to the receiving port at your main base. Once linked and powered, the port will load items from its internal buffer into the Drone, which will then fly across the world to deliver the payload to your main hub.

    Tip: At your main base, attach an Item Pipe set to Extract on the receiving Drone port to automatically empty incoming deliveries into your main storage system or Foundry line.

How it works

Oritech's logistics system is engineered from the ground up for maximum server and client performance. In traditional tech mods, every single pipe block often acts as a ticking Block Entity that checks for items or fluids twenty times a second, leading to massive lag in large factories. Oritech avoids this by only creating Block Entities at the exact pipe segments that touch a machine or inventory. All the intermediate pipe blocks connecting Point A to Point B are simple, non-ticking blocks.

Furthermore, the entire pipe network is precomputed and cached. When you place a pipe or adjust a connection with the Wrench, the mod calculates the valid paths from all extracting inputs to all available outputs and saves that route in memory. Network updates are only triggered when a block is broken, placed, or wrenched. Because the math is done ahead of time, Oritech only needs a single, high-speed tier of pipe for items, fluids, and energy.

Drones complement this architecture by solving the long-distance problem. While cached pipes are lightweight, running hundreds of blocks of pipe across the wilderness from a remote Bedrock Extractor or oil well is tedious and requires loading every chunk along the pipeline. Drones bypass intermediate obstacles altogether, acting as high-capacity point-to-point couriers designed specifically for Oritech's outpost-focused gameplay loop.

Common mistakes

  • Forgetting to set pipes to Extract: Simply connecting an Item or Fluid Pipe between a chest and an Assembler will do nothing. You must use the Wrench on the output joint to enable extraction.
  • Building long cross-country pipelines: Running pipes hundreds of blocks from an oil well or Bedrock Extractor wastes materials and causes chunk-loading headaches. Always use Drones for outpost-to-base transport.
  • Blocking Drone flight paths: Placing a Drone port indoors or under low overhanging roofs will prevent the Drone from launching or docking properly. Always give ports direct sky access.
  • Connectivebleed on tight setups: Letting two different Fluid Pipes touch by accident will merge their cached networks and clog the line. Use the Wrench to disconnect adjacent pipes that shouldn't touch.

FAQ

Why are there no upgraded tier-2 or tier-3 pipes in JEI/EMI?

Oritech intentionally uses a single tier for Item, Fluid, and Energy pipes. They are balanced to be fast by default, eliminating the tedious chore of replacing your entire factory's wiring as you progress.

Will building a massive pipe network lag my game?

No. Because Oritech only places Block Entities at the ends of the pipes connected to machines and caches the entire network path, straight runs of pipes have almost zero impact on game performance.

How do I connect pipes to Oritech's multiblock machines?

Most Oritech machines are animated multiblocks with dedicated input and output ports on specific faces. Attach your pipes directly to the textured port sockets on the machine casing rather than random structural blocks.

Can Oritech pipes connect to machines from other mods?

Yes, Oritech uses standard item, fluid, and energy capabilities, meaning its pipes work seamlessly with compatible mods like Mekanism, Create, Applied Energistics 2, and Tech Reborn.

By combining Wrench-configured cached pipe networks for local machine automation with long-range Drones for remote outposts, you can build a high-speed, lag-free Oritech factory.

More Oritech guides

Oritech · Getting startedOritech Getting Started Guide: First Machines & ProgressionStarting out in Oritech requires shifting from simple single-block crafting to building animated multiblock machines and physical upgrade networks. In this guide, you will learn how to gather essential early-game resources, assemble your first Machine Cores, set up a reliable power grid, and establish a basic ore-processing factory. Mastering these fundamentals will lay the groundwork for advanced automation, laser mining, and cybernetic enhancements.Beginner7 steps
Oritech · ExplainedMachine Addons, Ports & Extenders ExplainedUnlike traditional tech mods where upgrades are tiny items tucked away inside a GUI inventory, Oritech uses a physical, visual multiblock system for machine customization. In this guide, you will learn how to assemble Oritech multiblocks, expand their connectivity using Machine Extenders, and attach physical Addon blocks to boost processing speed, efficiency, and capacity. Mastering this system is essential for scaling your factory from basic ore processing to advanced late-game automation.Beginner7 steps
Oritech · Setup guideHow to Build an Automated Ore Processing LineBuilding an automated ore processing line in Oritech transforms your raw mined materials into significantly higher ingot yields while generating valuable metal byproducts. By chaining together specialized multiblock machines like the Pulverizer, Crusher, Foundry, and Powered Furnace, you can automate your resource production from raw ore to finished ingots and alloys.Intermediate7 steps
Oritech · PowerOritech Power Generation Guide: From Biofuel to Oil & SolarMastering energy generation in Oritech is essential as you transition from basic ore processing to running heavy automated multiblocks, mining lasers, and particle accelerators. This guide walks you through comparing the mod's main power sources, building a self-sustaining biofuel loop, tapping remote oil wells, and scaling up your grid with Big Solar Panels. By establishing a diverse energy infrastructure, you will ensure your factory never stalls during high-demand operations.Intermediate7 steps
Oritech · ProgressionHow to Make Plastic in Oritech: Oil Refining vs. Bio-FarmingPlastic Plates are a crucial mid-game milestone in Oritech, unlocking advanced circuit boards, Machine Cores, and cybernetic upgrades. This guide compares and walks you through both plastic production pathways—pumping naturally spawning Oil Wells versus building automated Bio-Farms—so you can set up the best supply chain for your base.Intermediate7 steps
Oritech · Setup guideAutomated Mining Guide: Laser Arms & Bedrock ExtractorsManual mining quickly becomes a bottleneck when building massive processing lines in Oritech. This guide will walk you through automating block harvesting using the Laser Arm and transitioning into infinite late-game metal generation with Bedrock Extractors. By setting up these systems at remote resource nodes, you will guarantee an endless supply of raw materials for your central factory.Intermediate7 steps