Oritech · Setup guide · Intermediate
How to Build an Automated Ore Processing Line
Building an automated ore processing line in Oritech transforms your raw mined materials into significantly higher ingot yields while generating valuable metal byproducts. By chaining together specialized multiblock machines like the Pulverizer, Crusher, Foundry, and Powered Furnace, you can automate your resource production from raw ore to finished ingots and alloys.
What you need
- Pulverizer or Fragment Forge (Crusher)
- Centrifuge (optional, for advanced byproduct washing)
- Powered Furnace and Foundry
- Enough Machine Cores to assemble the multiblock structures
- Oritech Item Pipes, Energy Pipes, and Fluid Pipes (if using fluid washing)
- Oritech Wrench for pipe configuration
- A stable power generation source (e.g., Basic Generator, Bio Generator, or Big Solar Panels)
- Machine Extenders and Addon Blocks (Speed, Efficiency, or Yield addons)
- Input and Output Chests or storage blocks
Step by step
1Prepare the Multiblock Footprint and Power Grid
Oritech machines are animated multiblocks that require specific spatial footprints and Machine Cores to form. Clear a flat area in your base and lay down a main trunk of Energy Pipes connected to your power generators. Leave a 2-to-3 block gap between where each machine will sit to give yourself room for Item Pipes and Addon blocks.
Tip: Craft higher-tier Machine Cores early if you can; they provide better base stats for your multiblock machines.
2Place Your Primary Crushing Machine
Place down your Pulverizer (or upgrade to the larger Fragment Forge for heavy duty crushing) at the start of the line and right-click it to view the required Machine Core placements. Place the cores into the highlighted ghost slots to form the complete multiblock. Place an input chest adjacent to the machine and connect it using an Item Pipe.
Tip: Use the Oritech Wrench on the pipe connection attached to the input chest to set it to extraction mode.
3Route Crushed Materials to a Centrifuge (Optional Tier)
If you want maximum yield and secondary metal byproducts, place a Centrifuge next to your crushing machine and assemble its multiblock structure. Run an Item Pipe from the output of your Pulverizer or Fragment Forge into the input of the Centrifuge. If you are running a fluid-washed variant of the recipe, hook up a Fluid Pipe supplying water to the Centrifuge.
Tip: Check EMI or JEI to compare dry vs. wet centrifugation recipes, as certain ores yield rare bonus dusts only when washed with water.
4Set Up the Powered Furnace for Standard Smelting
Place and assemble a Powered Furnace next in line to handle straightforward dust-to-ingot smelting. Connect the main dust output from your Crusher or Centrifuge directly into the Powered Furnace using Item Pipes. Connect the output of the Powered Furnace to your final storage chest.
Tip: The Powered Furnace is much faster and more energy-efficient per operation than vanilla furnaces once upgraded.
5Integrate a Foundry for Alloying and High-Yield Smelting
Assemble a Foundry multiblock parallel to your Powered Furnace. The Foundry serves two roles: combining secondary byproduct dusts with primary dusts to create alloys (like Steel, Electrum, or Bronze), or smelting pure ores with flux materials for bonus ingot yields. Route specific dust pairs from your Centrifuge into the Foundry's dual input slots.
Tip: Consult the in-game Oracle Index or EMI to verify which byproduct ratios match the alloys you need before locking in your pipe routes.
6Install Machine Extenders and Addon Blocks
Locate the glowing addon ports on the exterior of your formed Pulverizer, Powered Furnace, and Foundry models. Attach Speed Addons, Efficiency Addons, or extra Input/Output ports directly onto these nodes. If a machine runs out of ports, attach a Machine Extender to a valid port to expand the number of available addon slots.
Tip: Prioritize Speed Addons on the Centrifuge and Crusher first, as ore grinding is usually the bottleneck of the processing line.
7Configure Logistics with the Wrench and Power On
Double-check all Energy Pipe connections to ensure every multiblock's energy acceptor port is linked to your main power line. Use your Wrench to ensure Item Pipes between machines are only extracting from output sides and inserting into input sides, preventing backflow. Drop a stack of raw ore into your initial input chest and watch the animated machines cycle through the chain.
Tip: Oritech pipes have only one fast tier and cache their networks, so avoid creating unnecessary loops in your pipe lines to keep item routing predictable.
How it works
Oritech's ore processing philosophy is built around branching chains that trade infrastructure complexity and energy consumption for higher yields and valuable byproducts. In the basic chain, routing Raw Ore through a Pulverizer or Fragment Forge breaks it down into crushed ore or dirty dust, immediately multiplying the output compared to basic vanilla smelting. Feeding that directly into a Powered Furnace gives you a quick, low-power ingot multiplier ideal for early automation.
The intermediate and advanced chains add the Centrifuge and the Foundry to the logic. When crushed ores are processed in a Centrifuge—especially when combined with fluids—they separate into purified dusts plus trace quantities of secondary metals (for example, getting trace precious metals from common base ores). Furthermore, routing materials through the Foundry instead of the Powered Furnace allows you to either immediately react those secondary dusts into usable alloys or smelt ores with supplementary additives to squeeze extra ingots out of every raw chunk.
Logistically, Oritech keeps performance high and setup simple by using a single, high-speed tier of Item, Fluid, and Energy Pipes alongside modular multiblocks. Rather than tearing down a machine to replace it with a 'Tier 2' block, you scale your processing line's throughput by upgrading the internal Machine Cores or snapping Addon Blocks and Machine Extenders onto the multiblock's addon ports.
Common mistakes
- Forgetting to complete the Multiblock with Machine Cores: Placing the main machine block alone will not work; you must place the required number and tier of Machine Cores in the ghost blocks for the machine to assemble and accept pipes.
- Clogging the Foundry with mismatched dusts: Because the Foundry requires two distinct inputs for alloying or boosted smelting, sending mixed outputs from a Centrifuge without filtering or dedicated buffer chests can stall the machine if one slot fills up with the wrong dust.
- Connecting pipes to non-port blocks on the multiblock: Multiblocks have specific visual ports for energy, items, and addons. Attaching pipes to decorative parts of the 3D model will often fail to transfer items or power.
- Over-upgrading with Speed Addons without checking power draw: Stacking multiple Speed Addons via Machine Extenders increases energy demand sharply, which can brown out your entire processing line and leave half-processed stacks stuck in the Centrifuge.
FAQ
Should I use a Powered Furnace or a Foundry at the end of my ore line?
Use the Powered Furnace for fast, bulk smelting of a single dust type into standard ingots. Use the Foundry when you want to automatically combine two different dusts into alloys or when using an additive recipe that yields extra ingots per ore.
How do I tell which processing chain gives the highest yield for a specific ore?
Because Oritech supports multiple processing variants and cross-mod metals, open EMI (or JEI/REI) or the in-game Oracle Index guide and check the usages on your Raw Ore. Compare the direct Crusher-to-Furnace path against the Fragment Forge-to-Centrifuge-to-Foundry path to see the exact byproduct percentages.
Do I need to craft upgraded tiers of Item or Energy Pipes as my factory grows?
No, Oritech intentionally uses a single, high-speed pipe tier for items, fluids, and energy. To increase machine speed, you upgrade the machines themselves using higher-tier Machine Cores and Addon blocks.
How can I feed this automated line endlessly in the late game?
Once your processing line is built, you can automate raw ore input by setting up Deep Drills, Laser Arms, or Bedrock Extractors on resource nodes and flying the raw ores back to your main processing hub using Oritech Drones.
By linking a Crusher, Centrifuge, and parallel Powered Furnace and Foundry units with Oritech's single-tier pipes and addon blocks, you can build a scalable, high-yield ore processing factory that maximizes both ingot output and rare metal byproducts.