Oritech · Explained · Beginner
Machine Addons, Ports & Extenders Explained
Unlike traditional tech mods where upgrades are tiny items tucked away inside a GUI inventory, Oritech uses a physical, visual multiblock system for machine customization. In this guide, you will learn how to assemble Oritech multiblocks, expand their connectivity using Machine Extenders, and attach physical Addon blocks to boost processing speed, efficiency, and capacity. Mastering this system is essential for scaling your factory from basic ore processing to advanced late-game automation.
What you need
- An Oritech processing machine (e.g., Powered Furnace, Pulverizer, Assembler, or Foundry)
- Machine Core blocks (tier matching your machine's requirement, check JEI/EMI for exact counts)
- Machine Extenders (for adding extra addon slots)
- Addon blocks (e.g., Speed Addon, Efficiency Addon, or Energy Acceptor)
- Oritech Wrench (for rotating, debugging, and configuring ports)
- Energy Pipes and a power generator (to supply RF/FE)
Step by step
1Place the Primary Machine Controller
Start by clearing a flat area in your base with extra room around the sides and back for future expansions. Place your main machine block—such as the Assembler, Foundry, or Powered Furnace—on the ground. Unlike single-block machines, this block acts as the controller and requires extra structural blocks before it can fully form and operate.
Tip: Always leave at least a 2-block gap between different machines so you have physical space to attach addons and extenders later.
2Complete the Multiblock with Machine Cores
Right-click or look at the placed machine controller to preview the required multiblock footprint, which is displayed as translucent ghost blocks in the world. Craft the appropriate tier of Machine Core (from basic tiers up to advanced late-game cores) and place them directly into all highlighted ghost positions. Once the final core is placed, the blocks will merge and trigger a deployment animation, locking the machine into an active state.
Tip: Higher-tier machines require higher-tier Machine Cores; check EMI or JEI to see which core tier corresponds to your machine.
3Identify the Addon Ports
Walk around your newly formed multiblock and inspect its exterior textures. You will see specific socket-like markings on the sides or back of the machine—these are the Addon Ports. Standard pipes can connect to normal machine faces for items and fluids, but Addon blocks and Machine Extenders will only function when placed directly against these designated port faces.
Tip: Open the machine's GUI and find the addon/info tab to highlight where the available ports are located on the 3D model.
4Attach Direct Stat Addons
Craft an upgrade block such as a Speed Addon or Efficiency Addon. Place the addon block directly against one of the machine's open Addon Ports so that the connector face aligns with the socket. When connected properly, the addon will visually snap or link to the port, immediately altering the machine's base stats without requiring you to insert anything into an internal slot.
5Expand Capacity with Machine Extenders
Most machines only have one or two built-in Addon Ports, which limits how many upgrades you can install directly. To bypass this limit, remove your direct addon and place a Machine Extender against the machine's Addon Port instead. The Machine Extender acts as a physical hub, branching out to provide multiple new faces where you can attach several addons simultaneously.
Tip: You can chain multiple Machine Extenders together (up to a tier-based limit) to build massive upgrade arrays on a single machine.
6Connect Specialized Functional Addons
Beyond simple stat boosters like Speed and Efficiency, some advanced machines or specific setups require functional blocks like the Energy Acceptor or fluid/item port addons. Attach these specialized blocks to the available ports on your machine or along your Machine Extender chain. For example, attaching an Energy Acceptor lets you feed massive amounts of power into high-drain machines that otherwise bottleneck on standard input faces.
Tip: Use the Oritech Wrench to rotate addons or reconfigure pipe connections if a block faces the wrong way upon placement.
7Verify Multipliers in the Machine GUI
Right-click the main machine controller to open its interface and inspect the stats panel. Here you can verify that all attached Machine Extenders and Addons are actively recognized by the controller. Check the combined speed multiplier and energy consumption rate to make sure your power grid can sustain the upgraded demand, then hook up your item and energy pipes to begin processing.
Tip: Always balance Speed Addons with Efficiency Addons; stacking pure speed will cause energy consumption per tick to skyrocket.
How it works
Oritech replaces traditional inventory-based upgrade cards with a spatial networking system. When a machine finishes its multiblock assembly using Machine Cores, the controller block scans its specific exterior Addon Port coordinates. Whenever a valid addon block is placed adjacent to an Addon Port, the machine registers it as part of its hardware structure and recalculates its processing speed, power draw, and internal buffers.
Machine Extenders work by forwarding this port scan through a connected graph. When an Extender is attached to a valid Addon Port, the controller treats the exposed faces of the Extender as additional valid ports. This design turns upgrading into an engineering puzzle: the stronger you want a machine to be, the larger its physical footprint becomes in your factory, forcing you to plan pipe routing and spatial layout carefully.
Because Oritech caches network and multiblock data for server performance, stat changes only recalculate when a block is placed or broken along the addon chain. This keeps large factories with dozens of heavily upgraded machines and animated models running smoothly without causing tick lag.
Common mistakes
- Placing addons on any random face of the multiblock: Addons and Machine Extenders only work when attached directly to the textured Addon Port sockets, not on regular Machine Core faces.
- Forgetting to complete the Machine Core structure first: A machine will not initialize its ports or accept power until every ghost block position is filled with a Machine Core.
- Over-stacking Speed Addons early on: Speed upgrades increase power consumption exponentially; without Efficiency Addons or an upgraded power grid, the machine will stall halfway through recipes due to power starvation.
- Blocking Addon Ports with logistical pipes: Routing Item, Fluid, or Energy Pipes directly across an Addon Port prevents you from placing a Machine Extender there later. Route pipes into standard input faces instead.
FAQ
Why isn't my machine forming after I place it down?
Most Oritech machines are multiblocks. Look at the translucent ghost blocks surrounding the main controller and fill every one of those spots with Machine Cores to trigger the assembly animation.
How do I attach more upgrades if my machine only has one Addon Port?
Place a Machine Extender onto that single Addon Port. The extender provides multiple new faces where you can attach several addons or even chain additional extenders.
Can I remove or swap addons without breaking the whole machine?
Yes. Breaking an addon or a Machine Extender only disconnects that specific upgrade branch and updates the machine's stats; the core multiblock and its inventory contents will remain intact.
How do I know the exact stat bonus an addon gives?
Hover over the addon block in EMI or JEI (or check the in-game Oracle Index guide if installed) to view its exact modifiers, then check the machine's GUI stat tab to see the combined total.
By completing your machine multiblocks with Machine Cores, branching out their Addon Ports with Machine Extenders, and balancing Speed and Efficiency Addons, you can physically scale any Oritech machine into a high-throughput industrial powerhouse.