Integrated Dynamics · Addon guide · Intermediate

Integrated Crafting Guide: How to Set Up Auto-Crafting & Machine Processing

Mastering auto-crafting with the Integrated Dynamics mod family allows you to automate both standard 3x3 crafting recipes and complex multi-step machine processing on demand. By leveraging the Integrated Crafting, Integrated Tunnels, and Integrated Terminals addons, you can build a surprisingly cheap and scalable request-based automation network early in your progression. This guide walks you through encoding Recipe Variable Cards, configuring Crafting Interfaces on tables and furnaces, and managing jobs through terminals.

What you need

  • Integrated Dynamics, Integrated Tunnels, Integrated Crafting, and Integrated Terminals installed
  • Logic Cables and a connected storage system (e.g., Chests attached via Item Interfaces and a Storage Terminal)
  • Logic Programmer (portable or block version) and several blank Variable Cards
  • Crafting Interfaces and Crafting Writers (check JEI for exact crafting recipes using Crystalized Menril)
  • A vanilla Crafting Table and a Furnace (plus an Item Importer to extract finished products)
  • Crafting Job Terminal (optional, for monitoring and canceling active tasks)

Step by step

  1. 1Verify Your Storage Network Foundation

    Before adding auto-crafting, ensure you have a functional storage network using Integrated Tunnels and Integrated Terminals. You should have at least one Chest or storage block connected via an Item Interface, a Storage Terminal attached to the same Logic Cable network, and sufficient Ingredients stored inside. If your modpack enables network energy consumption, make sure an Energy Battery is attached to the cables.

    Tip: You can check the in-game guide book 'On the Dynamics of Integration' for basic storage network setups if you have not built one yet.

  2. 2Encode a 3x3 Crafting Recipe Variable

    Open your Logic Programmer and scroll through the element types on the left until you find the 'Recipe' type. Click it to reveal an input grid (containing item, fluid, and energy slots) and an output grid on the right. For a standard crafting recipe like a Piston, place the exact ingredients in the 3x3 item input grid and the resulting Piston in the item output slot, then insert a blank Variable Card into the bottom-right slot to write the Recipe variable.

    Tip: Use JEI integration by opening the Recipe tab in the Logic Programmer, searching for the item in JEI, and clicking the '+' button to auto-fill the inputs and outputs.

  3. 3Set Up the Crafting Interface on a Crafting Table

    Place a standard vanilla Crafting Table adjacent to your Logic Cable network. Attach a Crafting Interface onto the Logic Cable so that it faces directly against the Crafting Table. Right-click the Crafting Interface to open its GUI, and insert your newly encoded Piston Recipe Variable Card into one of the available slots.

    Tip: A green checkmark will appear on the slot if the Crafting Interface recognizes that the target block can validly craft that recipe.

  4. 4Encode a Processing Recipe for a Furnace

    Machine processing works differently because the network only needs to know what goes in and what comes out, not the 3x3 layout. Open the Logic Programmer to the 'Recipe' tab again. To automate Smooth Stone, place 1 Cobblestone in the top-left item input slot and 1 Stone in the item output slot (do not include coal or fuel in the recipe card), then bind this to a new Variable Card.

    Tip: By right-clicking an input slot in the Logic Programmer's Recipe tab, you can configure item tag matching or NBT properties if your recipe allows interchangeable ingredients.

  5. 5Attach the Crafting Interface to a Furnace

    Place a Furnace next to your Logic Cables and make sure it has a steady supply of fuel in its fuel slot. Attach a Crafting Interface to the top face of the Furnace (since vanilla furnaces only accept smelting inputs from the top). Open the Crafting Interface and insert your Cobblestone-to-Stone Recipe Variable Card.

    Tip: For modded machines that allow side configuration, you can attach the Crafting Interface to any side configured to accept inputs.

  6. 6Return Processed Items to the Network

    Unlike a Crafting Table, which crafts instantly inside the interface, a Furnace holds onto the finished item until it is pulled out. Attach an Item Importer onto the bottom face of the Furnace (or any output side on a modded machine) and connect it to your main Logic Cable network. Open the Item Importer and insert a simple Boolean 'True' Variable Card into the 'Import All Items' aspect so it automatically pulls smelted items back into your network's storage.

    Tip: The Crafting Interface does not need to receive the item back directly; it simply waits for the promised output item to enter any valid storage on the same network channel.

  7. 7Request Crafts and Monitor Jobs

    Open your Storage Terminal; you will now see your encoded outputs (Piston and Stone) listed with a small crafting icon even if you have zero in stock. Click the item, select the quantity you want to craft, and confirm the crafting plan to start the job. Attach a Crafting Job Terminal to your network and open it to view active jobs, check for missing intermediate ingredients, or cancel stuck processes.

    Tip: You can also automate crafting continuously without manual clicks by using a Crafting Writer part and inserting your Recipe Variable Card into its 'Craft Recipe' aspect.

How it works

In Integrated Dynamics, recipes are treated as first-class data types, just like integers, strings, or items. A Recipe data structure simply defines a contract: a set of required input ingredients (Items, Fluids, or Energy) and a set of expected outputs. Because recipes are stored on standard Variable Cards, they can be manipulated by operators or read dynamically before being fed into crafting components.

The Crafting Interface acts as the bridge between virtual recipe logic and physical blocks in the world. When placed against a Crafting Table, it uses internal capability checks to verify that the 3x3 recipe is valid according to standard crafting rules, executing the craft instantaneously by pulling ingredients from the network's Item Interfaces. When placed against a machine or chest, it operates in 'processing mode'—it simply pushes the specified inputs into the target inventory and marks the job as 'pending'.

While a processing job is pending, the Integrated Crafting network monitors all item, fluid, and energy additions across the entire storage channel. The moment your Item Importer pulls the finished product out of the furnace and deposits it into a networked chest, the network detects the arrival of the expected output, fulfills the contract, and either completes the job or sends the item to the next step in a multi-stage crafting tree.

Common mistakes

  • Red X in the Crafting Interface: If a Recipe Variable Card shows a red X inside a Crafting Interface attached to a Crafting Table, the recipe either does not match a valid vanilla crafting table pattern or you accidentally left extra items/fluids in the Logic Programmer grid.
  • Wrong Furnace Sides: Vanilla furnaces are strict about sidedness. Placing a Crafting Interface on the side of a furnace will push items into the fuel slot instead of the smelting slot, causing the craft to stall indefinitely.
  • Forgetting the Item Importer on Machines: A Crafting Interface only pushes inputs into machines; it never pulls outputs. Without an Item Importer (or another logistics method) putting the finished item back into a networked storage block, the crafting job will hang forever waiting for the output.
  • Channel Mismatches: Ensure your Item Interfaces (storage), Crafting Interfaces, and Item Importers are all operating on the same network channel (default is 0). If an importer puts smelted items into a storage channel that the Crafting Interface cannot see, the job will never register as complete.
  • Removing Variable Cards Used in Operators: While a basic Recipe card sits directly inside the Crafting Interface, if you build complex dynamic recipes using operators, remember that all referenced base cards must remain inside a Variable Store connected to the network.

FAQ

Why does my Recipe card show an error when placed in a Crafting Interface?

If the interface is on a Crafting Table, it validates the exact 3x3 recipe against the game's crafting manager. If the recipe is for a machine or uses uncraftable combinations, the Crafting Table interface will reject it. Move the interface to a machine or inventory instead.

How do I automate a machine that requires multiple inputs on different sides, or both fluids and items?

Because a Recipe Variable Card can hold items, fluids, and energy simultaneously, the Crafting Interface will attempt to push all of them into the attached block face. If a machine requires inputs on separate sides, point the Crafting Interface into an intermediate buffer chest or tank, and use Integrated Tunnels exporters or pipes to route the ingredients to the correct machine sides.

Can I keep a certain amount of an item in stock automatically without requesting it?

Yes. Instead of requesting via the Storage Terminal, place a Crafting Writer on your network. Combine an Inventory Reader or Network Reader (to count current stock) with a Less Than operator in the Logic Programmer, and use that condition to trigger the Crafting Writer when stock falls below your threshold.

How do I un-stick a crafting job if my furnace ran out of fuel mid-craft?

Either refuel the furnace so the output item finishes and enters the network, or open the Crafting Job Terminal, select the stalled job from the list, and click the cancel button to clear the network queue.

By encoding Recipe Variable Cards in the Logic Programmer and pairing Crafting Interfaces with Item Importers, you can seamlessly automate both instant table crafting and multi-step machine processing across your Integrated Dynamics network.

More Integrated Dynamics guides

Integrated Dynamics · Getting startedIntegrated Dynamics Getting Started Guide: Menril, Squeezers & Your First NetworkIntegrated Dynamics is one of the most powerful logic, automation, and logistics mods available, and it all starts with a single blue tree. In this guide, you will learn how to harvest Menril, operate the manual Squeezer and Drying Basin to craft your first components, build a basic reading network, and finally upgrade to powered mechanical machines. Mastering this early resource loop is essential because every cable, terminal, and variable card in the mod family relies on crystallized Menril.Beginner6 steps
Integrated Dynamics · ExplainedVariables, Readers & Writers Explained: How Integrated Dynamics Logic WorksIntegrated Dynamics can seem intimidating at first, as it replaces simple redstone wires with a full programming system based on data types and logic evaluations. In this beginner guide, you will learn how to read information from the world using Readers, bind that data to Variable Cards, display it on Display Panels, and trigger physical actions using Writers. Mastering this fundamental workflow is the key to unlocking the most powerful, lag-free automation networks in modded Minecraft.Beginner7 steps
Integrated Dynamics · ExplainedHow to Use the Logic Programmer: Operators, Lists & Predicates ExplainedMastering the Logic Programmer in Integrated Dynamics transforms basic redstone setups into intelligent, automated systems capable of processing complex data. In this guide, you will learn how to combine Variable Cards using operators, manipulate data lists, and apply functional programming concepts like predicates, map, and filter to build dynamic sorting and control networks.Intermediate8 steps
Integrated Dynamics · Addon guideIntegrated Tunnels Guide: How to Transfer Items, Fluids & Energy at Max SpeedIntegrated Tunnels expands your Integrated Dynamics networks by letting you move items, fluids, and energy across your base with zero travel delay. By mastering Interfaces, Importers, and Exporters alongside Variable Cards, you can build instant, infinitely scalable transfer systems that easily outperform standard pipes. This guide will walk you through setting up basic transfers, separating network traffic with channels, and configuring max-speed throughput.Beginner7 steps
Integrated Dynamics · Setup guideHow to Build a Storage Network with Integrated Terminals & TunnelsBuild a centralized, searchable storage and crafting system early in your survival world without needing expensive digital drives or massive power grids. By combining Integrated Dynamics with the Integrated Tunnels and Integrated Terminals addons, you can link all your existing chests, barrels, and storage drawers into one seamless interface.Beginner7 steps
Integrated Dynamics · PowerHow to Build an Automated Menril Power Plant (Generator & Battery Guide)In this guide, you will learn how to build a self-regulating Menril power plant using Integrated Dynamics and Integrated Tunnels. By reading the fill level of your Energy Batteries, your network will automatically feed wood from a tree farm into your Generators only when power is needed, preventing fuel waste.Intermediate8 steps