Integrated Dynamics · Setup guide · Beginner
How to Build a Storage Network with Integrated Terminals & Tunnels
Build a centralized, searchable storage and crafting system early in your survival world without needing expensive digital drives or massive power grids. By combining Integrated Dynamics with the Integrated Tunnels and Integrated Terminals addons, you can link all your existing chests, barrels, and storage drawers into one seamless interface.
What you need
- Menril Logs and a Squeezer alongside a Drying Basin (to produce Crystalized Menril Chunks)
- Logic Cables (to connect your network components)
- Item Interfaces (from Integrated Tunnels, one for each storage container or drawer controller)
- Storage Terminal (from Integrated Terminals, to view, insert, and craft items)
- Wrench (from Integrated Dynamics, for rotating, configuring, and removing cable parts)
- Storage containers (Vanilla Chests, Barrels, or external mod containers like a Storage Drawers Drawer Controller)
- Energy Battery (optional, as network power consumption is disabled by default in most configurations)
Step by step
1Process Menril Resources
Locate a Menril Tree in the world—easily recognizable by its blue leaves and glowing blue logs—and chop it down. Place a Menril Log inside a Squeezer and jump repeatedly on top of the block to crush the wood into liquid Menril Resin. Channel this resin into an adjacent Drying Basin and wait for it to solidify into a Crystalized Menril Block, which you can then craft down into Crystalized Menril Chunks.
Tip: Apply a redstone signal to the Squeezer to reset its top plate after each squeeze, and check JEI or your 'On the Dynamics of Integration' guidebook for exact component recipes.
2Arrange Your Storage Containers
Set up a neat wall or cluster of Double Chests, Barrels, or a bank of Storage Drawers in your base. Remember that in Minecraft, a Double Chest counts as a single inventory, meaning you only need to connect to one half of it. If you are using Storage Drawers, place a Drawer Controller so that all touching drawers are merged into a single inventory access point.
Tip: Using a Drawer Controller saves a massive amount of resources because it requires only one Item Interface to expose hundreds of individual drawers.
3Attach Item Interfaces
Hold an Item Interface in your hand and right-click directly onto the face of each Chest, Barrel, or Drawer Controller you want to include in your system. The Item Interface is a flat cable part that automatically spawns with a piece of Logic Cable attached to it. Make sure the flat panel side is flush against the storage block, as this is the side that reads the inventory.
Tip: If you misplace a part, shift-right-click it with the Integrated Dynamics Wrench to pop it off cleanly without breaking the cable.
4Connect the Logic Cable Network
Run Logic Cables between all of your attached Item Interfaces so that they form a single, continuous line. Every component on an Integrated Dynamics network must be physically linked by these cables to communicate and share inventory data. Bring one end of the cable line out to a convenient, easily accessible wall or pillar where you plan to stand and do your crafting.
Tip: You can hide unsightly cables inside walls by crafting Facades and attaching them over the Logic Cables.
5Install the Storage Terminal
Equip your Storage Terminal and right-click it onto the exposed face of the Logic Cable at your crafting station. Like the Item Interface, the Storage Terminal is a directional cable part rather than a full block, so up to six parts can theoretically fit on a single cable block. Right-click the dark screen of the newly placed Storage Terminal to open your unified inventory GUI.
6Configure Storage Priorities
To ensure your bulk items go into your high-capacity drawers before spilling into general chests, you must adjust part priorities. Close the terminal, look at the Item Interface attached to your Drawer Controller, and right-click the center of the interface (or click its settings icon) to open its configuration GUI. Locate the Priority setting and raise the number higher than zero, while leaving your regular chest interfaces at zero.
Tip: You can also set specific Channel numbers inside the Item Interface GUI if you want to create isolated sub-networks along the same cable line.
7Search, Filter, and Craft
Open the Storage Terminal GUI again and switch to the Item crafting tab at the top of the window to reveal a built-in 3x3 crafting grid alongside your items. Type into the search bar to filter your entire base's inventory in real time, and use the sorting buttons to organize items by name or quantity. When you craft using the terminal grid, it automatically pulls additional items from your chests to refill the recipe slots as you work.
Tip: If you have JEI installed, you can look up a recipe and click the plus (+) button to automatically pull the required ingredients from your connected chests straight into the terminal's crafting grid.
How it works
Unlike digital storage mods that convert items into abstract data inside hard drives, an Integrated Dynamics storage network leaves your items physically inside their original chests and drawers. The Logic Cable acts as a data and transfer bus, constantly polling every connected part for information.
The Item Interface acts as a passive bridge between an external block and the network. It exposes the inventory slots of the attached chest to the Logic Cable network without actively pushing or pulling items on its own. When you view the Storage Terminal, it simply aggregates the slot data from every Item Interface on the matching channel into one unified list.
When you drop an item into the Storage Terminal, the network immediately checks the Priority values of every connected Item Interface. It always attempts to route the item into the interface with the highest priority number first (such as a locked Drawer Controller). Only if that highest-priority inventory is completely full or rejects the item will the network cascade down to lower-priority interfaces, such as your overflow chests.
Common mistakes
- Using Item Importers or Exporters instead of Item Interfaces: Importers and Exporters actively pull or push items continuously, which will scramble your chests. Only an Item Interface passively exposes an inventory to the Storage Terminal.
- Placing Item Interfaces on both halves of a Double Chest: A Double Chest is treated as one merged inventory by the game. Putting two interfaces on the same Double Chest causes the Storage Terminal to read the inventory twice, resulting in visual duplication bugs.
- Forgetting to lock Storage Drawers when using high priority: If your Drawer Controller has the highest priority on the network, any random item you dump into the terminal will claim an empty, unlocked drawer. Always lock your drawers with a Drawer Key so only pre-assigned items go into them, allowing random items to overflow into lower-priority chests.
- Mismatching network channels: If an Item Interface is accidentally set to Channel 2 while your Storage Terminal is viewing Channel 1 (or the default wildcard channel settings are altered), those chests will become invisible to your terminal.
FAQ
Does this storage network require RF or Forge Energy to run?
By default, no. In the standard Integrated Dynamics configuration, networks operate without consuming energy. However, certain modpacks enable energy consumption for extra challenge; if your terminal refuses to turn on, attach a filled Energy Battery from the mod directly to any Logic Cable on the network.
Why are my items duplicating in the Storage Terminal display?
You likely attached two separate Item Interfaces to a single multi-block inventory, such as both sides of a Double Chest or two faces of a Drawer Controller. Remove one of the interfaces with your Wrench so the inventory is only read once.
Can I store fluids in the same Storage Terminal?
Yes! If you craft a Fluid Interface from Integrated Tunnels and attach it to any fluid tank on the same Logic Cable network, a Fluid tab in your Storage Terminal will allow you to view and extract liquids using buckets or fluid containers.
How do I set up automated crafting on demand?
The Storage Terminal gives you a manual crafting grid linked to your items. To request automated crafting recipes in the background, you will need to install the Integrated Crafting addon alongside Crafting Interfaces and Crafting Writers.
By linking Item Interfaces across your storage containers to a single Storage Terminal via Logic Cables, you create a highly responsive, priority-sorted storage and crafting hub that scales effortlessly from early game to late game.