Integrated Dynamics · Getting started · Beginner

Integrated Dynamics Getting Started Guide: Menril, Squeezers & Your First Network

Integrated Dynamics is one of the most powerful logic, automation, and logistics mods available, and it all starts with a single blue tree. In this guide, you will learn how to harvest Menril, operate the manual Squeezer and Drying Basin to craft your first components, build a basic reading network, and finally upgrade to powered mechanical machines. Mastering this early resource loop is essential because every cable, terminal, and variable card in the mod family relies on crystallized Menril.

What you need

  • An Axe and a Pickaxe
  • Iron Ingots, Sticks, and Planks (for crafting the Squeezer and Drying Basin)
  • A Redstone Lever or Button (for resetting the Squeezer)
  • Redstone Dust and Diamonds (for mechanical upgrades later)
  • On the Dynamics of Integration (the in-game manual, given on spawn or crafted with a Book and two Crystalized Menril Chunks)

Step by step

  1. 1Locate and Harvest a Menril Tree

    Explore the Overworld to find a Menril Tree, which is easily recognizable by its bright cyan leaves and turquoise-speckled wood. Chop down the Menril Logs and break the Menril Leaves to collect Menril Saplings and Menril Berries. Some logs are Enriched Menril Logs, which drop Crystalized Menril Chunks directly when broken. Replant the saplings immediately at your base so you have a renewable supply of wood.

    Tip: Unlike vanilla trees, Menril trees grow quite fast and do not require much vertical clearance, making them very easy to farm underground.

  2. 2Craft and Place the Squeezer and Drying Basin

    Open your crafting table and check JEI for the Squeezer (made from iron, sticks, and planks) and the Drying Basin (made from wood, iron, and black dye). Place the Squeezer on the ground first. Look closely at the base of the Squeezer to find the two sides that have small fluid output holes, and place your Drying Basin directly adjacent to one of those grooved sides. Place a Lever on an adjacent block or directly on the side of the Squeezer (Hold Shift while right-clicking).

    Tip: You can place a Drying Basin on both output sides of a single Squeezer to buffer extra fluid.

  3. 3Squeeze Menril Logs into Crystalized Menril Blocks

    Right-click the top of the Squeezer with a Menril Log in your hand to insert it into the press. Jump up and land repeatedly on top of the Squeezer to push the top plate down until it flattens completely. As you jump, Liquid Menril Resin will flow automatically out of the side hole into the adjacent Drying Basin. Flip the Lever on and off (a redstone pulse) to pop the Squeezer plate back to the top, and wait a few seconds for the resin in the Drying Basin to solidify into a Crystalized Menril Block.

    Tip: Jumping from a slightly higher block doesn't speed it up; rapidly tapping the jump key while standing on the rim or directly under a two-block ceiling is the fastest way to crush items manually.

  4. 4Craft Logic Cables, Variable Cards, and a Wrench

    Right-click the Drying Basin to take out your Crystalized Menril Block, and place it into a crafting grid to break it down into nine Crystalized Menril Chunks. Use these chunks along with Redstone and Paper to craft Logic Cables and a stack of Variable Cards (check JEI for exact patterns). While you are at the crafting table, also craft the Integrated Dynamics Wrench using Crystalized Menril Chunks and an Iron Ingot, as you will need it to remove or rotate network parts.

    Tip: Follow the tutorials inside the 'On the Dynamics of Integration' guidebook as you craft these items to receive free reward items!

  5. 5Build Your First Basic Reader Network

    Craft a Redstone Reader and a Display Panel. Place two connected Logic Cables on the ground, attach the Redstone Reader to the end facing any block or lever, and attach the Display Panel to the side of the cable. Right-click the Redstone Reader to open its GUI, find the redstone boolean or integer value aspect, and insert a blank Variable Card into that slot to bind it. Take that newly programmed Variable Card out, right-click the Display Panel, and insert the card into its slot to see a live readout of the redstone state.

    Tip: To detach a Reader, Writer, or Display Panel without breaking the cable, Shift + Right-Click the part specifically with your Wrench.

  6. 6Upgrade to the Mechanical Squeezer and Mechanical Drying Basin

    Once you have accumulated plenty of Crystalized Menril Chunks and some Diamonds, craft an Energy Battery, a Mechanical Squeezer, and a Mechanical Drying Basin. Place the two mechanical machines right next to each other. Open the GUI of the Mechanical Squeezer and toggle its automatic fluid output setting so it pushes Liquid Menril Resin directly into the adjacent Mechanical Drying Basin. Power both machines using an Energy Battery (charged via a Generator) or any Forge Energy (FE/RF) power cable from another tech mod.

    Tip: The Mechanical Squeezer not only eliminates jumping, it also processes ores into raw materials with a high multiplier rate, making it a strong early-game ore doubler.

How it works

The manual processing system works on physical block updates and direct adjacency. The Squeezer tracks the downward momentum of entities landing on its top hitbox, stepping down through several visual states until the recipe completes. When the item is crushed, the Squeezer immediately attempts to push the resulting fluid out of its two designated output ports into any fluid-accepting tank or Drying Basin touching those faces. It stays compressed until a redstone signal updates the block and resets the piston mechanism.

When you transition to Logic Cables, you are building a unified data network. Unlike standard redstone wire that carries a single analog signal strength from 0 to 15, Logic Cables transmit typed data packets—such as Booleans, Integers, Strings, or Item definitions. Variable Cards act as pointers or references: when you put a card into a Reader, it writes the exact memory address of that specific Reader and property aspect onto the card.

For simple setups (putting a card directly from a Reader into a Display Panel or Writer), the Display simply looks up the Reader referenced on the card across the connected Logic Cables and updates its visual output every tick. As you expand into complex operations using a Logic Programmer later on, you will need a Variable Store block attached to the network so the cables can look up chained variables simultaneously.

Common mistakes

  • Misaligning the Drying Basin: The manual Squeezer only outputs fluid from two opposite sides (the ones with the visible horizontal openings), not all four. If your Drying Basin stays empty after crushing a log, break it and move it 90 degrees to an open fluid port.
  • Leaving a constant Redstone signal on the Squeezer: If you leave the Lever turned ON after resetting the Squeezer, the plate will lock at the top and refuse to move down when you jump on it. Always turn the Lever back OFF before inserting the next Menril Log.
  • Breaking network parts with a Pickaxe: Using a pickaxe on a Display Panel or Reader often breaks the entire Logic Cable behind it and can be tedious. Always use the mod's Wrench with Shift + Right-Click to cleanly pop off individual network parts.
  • Losing track of Variable Cards: All programmed Variable Cards look identical in your inventory unless you hover over them. Put a Portable Logic Programmer or a regular Logic Programmer + Labeller to use early so you can name your cards clearly.

FAQ

Why isn't my Display Panel showing anything even though I inserted a Variable Card?

First, make sure the Display Panel and the Reader are physically connected by an unbroken line of Logic Cables. Second, check the Variable Card tooltip to ensure it was actually bound to an aspect inside a Reader and isn't still blank. If you used an operator from a Logic Programmer, remember that the original Reader card must be placed inside a Variable Store connected to the same network.

Can I automate the manual Squeezer before unlocking the Mechanical Squeezer?

Yes! Any player-Placed entity, animal, or armor stand bouncing on top of the Squeezer will press it down, and you can use Hoppers or Integrated Tunnels later to insert logs, extract items from the Drying Basin, and pulse the Squeezer with a redstone clock.

Do Integrated Dynamics networks require power (RF/FE) to run?

By default in most installations, Logic Cable networks do not require energy to read or display variables. However, the mechanical machines (Mechanical Squeezer and Mechanical Drying Basin) do require Forge Energy, and server or modpack configs can optionally enable power consumption for network cables.

How do I wipe a programmed Variable Card so I can reuse it?

Simply place the programmed Variable Card by itself into any crafting grid (including your 2x2 inventory crafting grid) and take the resulting blank Variable Card out of the output slot.

By harvesting Menril trees, mastering the Squeezer and Drying Basin loop, and linking your first Reader and Display Panel with Logic Cables, you have built the foundation for limitless automation in Integrated Dynamics.

More Integrated Dynamics guides

Integrated Dynamics · ExplainedVariables, Readers & Writers Explained: How Integrated Dynamics Logic WorksIntegrated Dynamics can seem intimidating at first, as it replaces simple redstone wires with a full programming system based on data types and logic evaluations. In this beginner guide, you will learn how to read information from the world using Readers, bind that data to Variable Cards, display it on Display Panels, and trigger physical actions using Writers. Mastering this fundamental workflow is the key to unlocking the most powerful, lag-free automation networks in modded Minecraft.Beginner7 steps
Integrated Dynamics · ExplainedHow to Use the Logic Programmer: Operators, Lists & Predicates ExplainedMastering the Logic Programmer in Integrated Dynamics transforms basic redstone setups into intelligent, automated systems capable of processing complex data. In this guide, you will learn how to combine Variable Cards using operators, manipulate data lists, and apply functional programming concepts like predicates, map, and filter to build dynamic sorting and control networks.Intermediate8 steps
Integrated Dynamics · Addon guideIntegrated Tunnels Guide: How to Transfer Items, Fluids & Energy at Max SpeedIntegrated Tunnels expands your Integrated Dynamics networks by letting you move items, fluids, and energy across your base with zero travel delay. By mastering Interfaces, Importers, and Exporters alongside Variable Cards, you can build instant, infinitely scalable transfer systems that easily outperform standard pipes. This guide will walk you through setting up basic transfers, separating network traffic with channels, and configuring max-speed throughput.Beginner7 steps
Integrated Dynamics · Setup guideHow to Build a Storage Network with Integrated Terminals & TunnelsBuild a centralized, searchable storage and crafting system early in your survival world without needing expensive digital drives or massive power grids. By combining Integrated Dynamics with the Integrated Tunnels and Integrated Terminals addons, you can link all your existing chests, barrels, and storage drawers into one seamless interface.Beginner7 steps
Integrated Dynamics · Addon guideIntegrated Crafting Guide: How to Set Up Auto-Crafting & Machine ProcessingMastering auto-crafting with the Integrated Dynamics mod family allows you to automate both standard 3x3 crafting recipes and complex multi-step machine processing on demand. By leveraging the Integrated Crafting, Integrated Tunnels, and Integrated Terminals addons, you can build a surprisingly cheap and scalable request-based automation network early in your progression. This guide walks you through encoding Recipe Variable Cards, configuring Crafting Interfaces on tables and furnaces, and managing jobs through terminals.Intermediate7 steps
Integrated Dynamics · PowerHow to Build an Automated Menril Power Plant (Generator & Battery Guide)In this guide, you will learn how to build a self-regulating Menril power plant using Integrated Dynamics and Integrated Tunnels. By reading the fill level of your Energy Batteries, your network will automatically feed wood from a tree farm into your Generators only when power is needed, preventing fuel waste.Intermediate8 steps