OpenComputers · Late game
Thaumic Computers Essentia Distillery & Infusion Matrix
This late-game setup integrates OpenComputers with Thaumcraft via the Thaumic Computers addon to completely automate essentia management and arcane infusion crafting. By monitoring Ward Jars in real-time and controlling Essentia Transfusers and Redstone Inlays, the system eliminates pipe clogging, maintains exact aspect stocks, and executes complex infusion recipes with zero user intervention.
- Footprint
- 13x13x7 blocks
- Power
- Moderate RF/FE draw for Tier 3 computer and Adapter network (check JEI for exact configs)
- Throughput
- Continuous smelting up to Smeltery cap; ~1 infusion craft per minute
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Computer Case (Tier 3) | 1 |
| Screen (Tier 3) | 1 |
| Keyboard | 1 |
| Central Processing Unit (CPU) (Tier 3) | 1 |
| Graphics Card (Tier 3) | 1 |
| Memory (Tier 3.5) | 2 |
| Hard Disk Drive (Tier 3) | 1 |
| Lua BIOS (EEPROM) | 1 |
| OpenOS Floppy Disk | 1 |
| Component Bus (Tier 3) | 1 |
| Power Converter | 1 |
| Adapter | 8 |
| Transposer | 14 |
| Redstone I/O | 1 |
| Cable (OpenComputers) | 64 |
| Runic Matrix | 1 |
| Arcane Stone Bricks | 4 |
| Arcane Stone Pillar | 4 |
| Arcane Pedestal | 13 |
| Thaumium Essentia Smeltery | 1 |
| Arcane Alembic | 3 |
| Auxiliary Slurry Pump | 2 |
| Auxiliary Venting Port | 1 |
| Filling Essentia Transfuser | 3 |
| Emptying Essentia Transfuser | 1 |
| Warded Jar | 40 |
| Void Jar | 8 |
| Stabilizer | 4 |
| Redstone Inlay | 16 |
| Chest | 4 |
Build it step by step
1Construct the Symmetrical Infusion Altar
Build the standard Thaumcraft Infusion Altar in the center of your 13x13 room using the Runic Matrix, Arcane Stone Bricks, and Pillars, then activate it with Salis Mundus. Place the central Arcane Pedestal directly under the Runic Matrix, and arrange the remaining 12 Arcane Pedestals radially around the center with exact symmetry to avoid adding structural instability.
2Install Underfloor Transposers and Cabling
Dig a two-block-deep trench beneath all 13 Arcane Pedestals and place one OpenComputers Transposer directly underneath each pedestal. Place input chests or connect an item-routing inventory adjacent to the Transposers so they can push reagents up into the pedestals and pull the finished craft down from the central pedestal. Connect all Transposers back to the central computer location using OpenComputers Cables.
3Build the Essentia Smeltery and Transfuser Hub
Along one perimeter wall, place the Thaumium Essentia Smeltery flanked by two Auxiliary Slurry Pumps and an Auxiliary Venting Port to maximize breakdown speed and reduce flux generation. Stack three Arcane Alembics on top of the smeltery and attach a Filling Essentia Transfuser to each alembic pointing toward your storage wall. Place a Transposer behind the smeltery connected to a fuel and source-item Chest.
4Set Up the Warded Jar Storage Wall
Arrange your Warded Jars and Void Jars in a semi-circle or wall within 16 blocks of both the Filling Essentia Transfusers and the Runic Matrix. Use Void Jars for common secondary aspects (like Terra or Metal) to prevent the Arcane Alembics from backing up during complex item breakdowns. Place OpenComputers Adapters adjacent to key jar clusters or use a Thaumic Computers Essentia Reader setup connected to the Cable network to monitor aspect quantities.
5Integrate Matrix Control and Stabilizers
Place an OpenComputers Adapter directly adjacent to or beneath the Runic Matrix structure so the computer can read current instability levels and active craft status via the Thaumic Computers API. Set up four Stabilizers around the altar connected via Redstone Inlays, and wire a Redstone I/O block to control both the stabilizers and an automated gauntlet user (or direct Thaumic Computers matrix trigger) to begin infusions.
6Assemble the Tier 3 Computer and Configure Software
Place the Computer Case (Tier 3), Screen (Tier 3), Keyboard, and Power Converter near the altar, ensuring a Component Bus (Tier 3) is installed inside the case to handle the high number of connected Transposers and Adapters. Boot into OpenOS, write a Lua script that queries the Adapter network for aspect amounts, dispatches items to the Smeltery Transposer when aspects fall below threshold, and sequences pedestal loading before triggering the Runic Matrix.
How it works
The core strength of this design lies in replacing traditional, slow Essentia Tubes with wireless Essentia Transfusers governed by an OpenComputers control loop. When the Lua script detects via the Adapters that a specific aspect in the Warded Jar wall has dropped below a set threshold (e.g., 128 points), it instructs the Smeltery Transposer to insert the corresponding raw item from the input chest into the Thaumium Essentia Smeltery. As the item breaks down, the Filling Essentia Transfusers on the Arcane Alembics immediately beam the gaseous essentia directly into the matching labeled Warded Jars or Void Jars, completely eliminating suction conflicts.
For arcane infusion, the system ensures zero instability loss through perfectly synchronized item placement and pre-flight aspect verification. Before placing any items on the Arcane Pedestals, the computer verifies via the Thaumic Computers Adapter interface that all required aspects for the selected recipe are currently present in the Warded Jars. Once verified, the 13 underfloor Transposers simultaneously push the central catalyst and outer reagents onto the pedestals, ensuring that items sit on the pedestals for the shortest time possible before the Runic Matrix is triggered.
During the active infusion cycle, the Adapter monitoring the Runic Matrix tracks real-time stability metrics and essentia suction progress. The Emptying Essentia Transfuser mounted near the altar pulls the required aspects from the Warded Jars directly into the matrix upon demand. As soon as the central Transposer detects that the item on the central Arcane Pedestal has transformed into the target output item, it immediately extracts the finished artifact into the output chest, resetting the altar for the next job.
Upgrades and scaling
- Upgrade the Thaumium Essentia Smeltery to a Voidseer or Void Metal Essentia Smeltery to increase conversion efficiency and further minimize flux pollution inside the chunk.
- Add an OpenComputers Robot equipped with an Inventory Controller Upgrade to dynamically apply and remove Jar Labels on unassigned Warded Jars for exotic, rarely used aspects.
- Install an Aura Monitor block or Flux Condenser array linked to another Redstone I/O block so the computer automatically pauses smelting operations if local chunk Flux approaches rift-spawning levels.
- Place a sprawling grid of Stabilization items (such as Candles or Mob Heads) in a hidden room directly beneath the underfloor Transposer wiring to passively boost the altar's base stability without cluttering the workspace.
Common mistakes
- Forgetting to install a Component Bus (Tier 3) inside the Computer Case; with 14 Transposers and multiple Adapters connected, a default computer will crash or fail to initialize components due to crossing the device limit.
- Placing the Transposers or OpenComputers Cables asymmetrically within the Infusion Altar's stability scan zone, which actively penalizes the Runic Matrix and increases infusion instability.
- Failing to use Void Jars for byproduct aspects; if an item contains two aspects and the jar for the secondary aspect is completely full, the Arcane Alembic will jam and halt the entire distillery.
- Placing Warded Jars more than 16 blocks away from the Filling or Emptying Essentia Transfusers, causing the wireless essentia stream to silently fail and leave the Runic Matrix starving for aspects.
FAQ
Why use Transposers under the pedestals instead of Hoppers or Droppers?
Transposers are completely invisible to the Runic Matrix's symmetry check if placed symmetrically under the floor, and they can both insert reagents and extract the finished product from the exact same block space via Lua code.
How does the computer actually start the Runic Matrix infusion?
Depending on your exact Thaumic Computers addon version and config, the Adapter can either invoke a direct component method on the matrix or the Redstone I/O block can pulse a fake-player block holding a Caster's Gauntlet aimed at the Runic Matrix.
Can one Adapter read all 48 Warded Jars at once?
A standard OpenComputers Adapter only reads adjacent blocks, so you should either group jars around multiple Adapters or use the dedicated essentia-reading peripherals provided by Thaumcraft computer addons to scan the entire jar bank via Essentia Transfusers.