Thermal Expansion · Mid game
Phytogenic Insolator & Fluxed Phyto-Gro Farm
The Phytogenic Insolator & Fluxed Phyto-Gro Farm is a compact, high-speed agricultural complex designed for mid-game resource generation. By automating the production of Fluxed Phyto-Gro via an Energetic Infuser and Rich Slag processing, this setup massively accelerates the growth of both vanilla crops and modded resource seeds inside Phytogenic Insolators. Building this eliminates the need for sprawling traditional farmland while providing a reliable, tick-friendly stream of materials.
- Footprint
- 7x5x3 blocks
- Power
- ~400-800 RF/t depending on augments (check JEI for exact recipe costs)
- Throughput
- ~1-2 harvesting operations per second across the array
- Difficulty
- intermediate
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Phytogenic Insolator | 4 |
| Energetic Infuser | 1 |
| Sequential Fabricator | 1 |
| Pulverizer | 1 |
| Aqueous Accumulator | 2 |
| Hardened Energy Cell | 1 |
| Hardened Upgrade Kit | 7 |
| Reinforced Upgrade Kit | 7 |
| Augment: Monoculture Cycle | 4 |
| Augment: Auxiliary Reception Coil | 6 |
| Itemduct | 18 |
| Fluiduct | 8 |
| Leadstone or Hardened Fluxduct | 15 |
| Hardened Servo | 4 |
| Hardened Filter | 4 |
| Chest or Cache | 4 |
| Water Bucket | 4 |
Build it step by step
1Establish the Water Supply
Dig a 3x2 trench on the back row of your footprint and fill it with water blocks to create infinite water sources. Place two Aqueous Accumulators directly adjacent to the water blocks. Configure their top or front faces as blue outputs so they continuously pump water without requiring any power.
2Place the Fertilizer Processing Line
On the left side of the build, place your Input Chest, followed by a Pulverizer, a Sequential Fabricator, and an Energetic Infuser in a linear row. Upgrade all three machines to at least Hardened or Reinforced tier using Upgrade Kits so they can accept speed augments and keep up with multiple Insolators.
3Configure Auto-Output for Fertilizer
Open the Configuration tab inside the Pulverizer, Sequential Fabricator, and Energetic Infuser. Set the side facing the preceding machine to Blue (Input) and the side facing the next machine to Orange (Output), enabling Auto-Output on each. Program the Sequential Fabricator with the recipe for Rich Phyto-Gro using Sawdust or Charcoal, Niter, and Rich Slag (check JEI for your specific modpack recipe variations).
4Set Up the Phytogenic Insolator Array
Place four Phytogenic Insolators in a row parallel to your water line. Connect the Aqueous Accumulators to the bottom or back of the Insolators using Fluiducts. Upgrade the Insolators to Reinforced tier and install the Augment: Monoculture Cycle in each one so that your planted seeds are never consumed during the harvesting process.
5Route the Fluxed Phyto-Gro
Run a line of Itemducts from the output side of the Energetic Infuser to the input sides of the four Phytogenic Insolators. Because the Energetic Infuser automatically pushes finished Fluxed Phyto-Gro out of its orange face, you do not need a Servo on that connection, keeping logistics clean and fast.
6Connect Output Storage and Seed Loops
Place your Output Chests or Caches at the end of the Insolator row and run Itemducts across the front or top faces of the Insolators to the storage. Configure the Insolators to push both primary and secondary outputs into this duct line. Attach Hardened Filters on the storage chests to prevent excess seeds from clogging the system if your crops produce surplus seeds alongside the Monoculture Cycle.
7Wire the Power Grid
Place your Hardened Energy Cell near the center of the build and run Fluxducts along the back or underside of all powered machines (Pulverizer, Sequential Fabricator, Energetic Infuser, and the four Phytogenic Insolators). Verify that all machines are receiving Redstone Flux and insert your desired seeds into the locked seed slots of the Insolators to start production.
How it works
This setup separates the workload into two distinct pipelines: fertilizer manufacturing and biological growth. In the manufacturing pipeline, raw materials like wood or charcoal are crushed in the Pulverizer and pushed directly into the Sequential Fabricator, where they combine with Niter and Rich Slag to create Rich Phyto-Gro. Instead of feeding this mid-tier fertilizer straight to the crops, it is routed into an Energetic Infuser. The Infuser charges the fertilizer with Redstone Flux, upgrading it into Fluxed Phyto-Gro, which provides the highest growth multiplier and secondary output yield boost in Thermal Expansion.
In the growth pipeline, the four Phytogenic Insolators act as enclosed, high-speed greenhouses. By utilizing the Monoculture Cycle specialization augment, the input slot locks onto a single seed type and retains the original seed after every growth cycle, completely removing the need for complex external seed-recycling itemduct loops. The Aqueous Accumulators keep the internal water tanks perpetually topped off, while the steady trickle of Fluxed Phyto-Gro allows each Insolator to complete a full harvest in mere moments, dumping the products straight into your output storage.
Upgrades and scaling
- Upgrade all machines to Signalum and Resonant tiers using Upgrade Kits to unlock additional augment slots for Auxiliary Reception Coils, drastically cutting down process times.
- Install Augment: Auxiliary Sieve in the Phytogenic Insolators to increase the chance of receiving secondary outputs, such as extra seeds, poisonous potatoes, or specialized modded byproducts.
- Attach an Induction Smelter setup nearby processing Sand and Ores to automate a continuous, hands-free supply of Rich Slag for the Sequential Fabricator.
- Replace the Pulverizer with a Sawmill equipped with a Sawblade itinerary if you want to produce Sawdust for Phyto-Gro while keeping the Wood Planks for other crafting systems.
Common mistakes
- Forgetting to install the Monoculture Cycle augment before inserting valuable modded seeds, resulting in the machine outputting the seed into storage and halting production if no loop is built.
- Letting the secondary output slot inside the Phytogenic Insolator fill up with excess seeds or byproducts; once the secondary slot is full, the entire machine stops operating unless voided or filtered out.
- Using regular Slag instead of Rich Slag when trying to craft Rich Phyto-Gro directly, which yields far less fertilizer per craft and starves the Energetic Infuser.
- Failing to surround the Aqueous Accumulators with at least two adjacent water source blocks, which heavily throttles their passive water generation rate and causes the Insolators to run dry.
FAQ
Where do I get a steady supply of Niter and Rich Slag?
Niter is easily obtained by pulverizing Sandstone in a Pulverizer, while Rich Slag is produced as a secondary byproduct when smelting ores with Sand inside an Induction Smelter.
Why does my Phytogenic Insolator stop working even when it has power and water?
Check the secondary output slot on the right side of the machine's GUI. If it fills up completely with extra seeds or byproducts and cannot push them into the output chest, the machine will halt until cleared.
Can I use this setup for trees as well as crops?
Yes, the Phytogenic Insolator can grow vanilla and many modded saplings into wood and leaves; for optimal tree growth, consider swapping or pairing the setup with the Arboreal Extractor or checking JEI for sapling substrate requirements.