Thermal Expansion · Late game
Cryo-Stabilized Fluxduct & Fluid Crafting Hub
This late-game automated assembly line melts raw dusts into specialty fluids and injects them directly into frames and empty conduits to mass-produce Cryo-Stabilized Fluxducts and Machine Frames. By dedicating individual Magma Crucibles and Fluid Transposers to each molten material, you eliminate fluid-flushing bottlenecks and ensure instant on-demand crafting for massive base expansions. It is the ultimate backbone for any player preparing to wire up a high-tier power grid.
- Footprint
- 9x5x4 blocks
- Power
- ~1.6 kRF/t to 6.4 kRF/t at full load (depending on augments)
- Throughput
- ~1 completed Cryo-Stabilized Fluxduct every 2-4 seconds
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Magma Crucible | 2 |
| Fluid Transposer | 2 |
| Sequential Fabricator | 2 |
| Induction Smelter | 1 |
| Resonant Energy Cell | 1 |
| Hardened Strongbox | 2 |
| Resonant Upgrade Kit | 7 |
| Signalum Fluxduct | 15 |
| Hardened Fluiduct (Super-Laminar) | 4 |
| Impulse Itemduct | 20 |
| Retriever (Signalum or Resonant) | 5 |
| Servo (Signalum or Resonant) | 2 |
| Augment: Auxiliary Reception Coil | 18 |
| Augment: Pattern Validation | 2 |
Build it step by step
1Lay the Power Spine and Storage
Place your Resonant Energy Cell at the left end of a 9-block line and run Signalum Fluxducts horizontally along the back row. Place your Input Strongbox on the front-left corner and the Output Strongbox on the front-right corner to bookend the production line.
2Install the Glass and Base Conduit Crafters
Place the Induction Smelter right next to the Input Strongbox, followed immediately by the first Sequential Fabricator. Lock the Induction Smelter's input slots using its GUI lock button so it only accepts Pulverized Obsidian and Lead Ingots, and configure its right side to auto-output Hardened Glass directly into the left side of the Sequential Fabricator.
3Set Up the Redstone Infusion Pair
Place the first Fluid Transposer directly to the right of the first Sequential Fabricator, and stack the first Magma Crucible directly on top of that Fluid Transposer. Set the Magma Crucible's bottom face to orange (Output) and the Fluid Transposer's top face to blue (Input) so Destabilized Redstone flows downward without needing external pipes.
4Assemble the Cryo-Stabilized Framing Stage
To the right of the first Fluid Transposer, place the second Sequential Fabricator, followed by the second Fluid Transposer. Stack the second Magma Crucible directly on top of this second Fluid Transposer, configuring the top and bottom faces for direct vertical fluid transfer of Gelid Cryotheum just like the previous pair.
5Program the Sequential Fabricators
Install an Augment: Pattern Validation into both Sequential Fabricators so their internal inventory slots remain locked to specific recipe items. Set the first Fabricator's recipe to craft empty Redstone Energy Fluxducts (or lower-tier frames depending on your modpack's exact recipe; check JEI), and the second Fabricator to craft empty Cryo-Stabilized Fluxducts surrounding the filled Redstone conduits.
6Wire the Itemduct Logistics
Run a line of Impulse Itemducts along the front or bottom of the machines connecting the Input Strongbox to the Magma Crucibles, Induction Smelter, and Sequential Fabricators. Attach Retrievers on the machine connections to pull the exact dusts, ingots, and nuggets from the Input Strongbox, ensuring you whitelist the items in each Retriever to prevent clogging.
7Upgrade and Augment the Line
Apply Resonant Upgrade Kits to all seven machines to unlock four augment slots per block. Fill the remaining slots in the Magma Crucibles, Fluid Transposers, and Induction Smelter with Auxiliary Reception Coils to drastically speed up the melting and infusing processes, which are normally the slowest steps in the chain.
How it works
The core philosophy of this build is vertical fluid pairing combined with horizontal item progression. In Thermal Expansion, machines feature built-in auto-input and auto-output capabilities via their Configuration tab. By placing each Magma Crucible directly atop its corresponding Fluid Transposer, molten Destabilized Redstone and Gelid Cryotheum are pushed straight down into the infusion chambers the tick they are melted, completely bypassing fluid pipe transfer limits and keeping the footprint remarkably compact.
Meanwhile, items travel strictly left-to-right from raw components to finished endgame conduits. The Induction Smelter feeds Hardened Glass directly into the first Sequential Fabricator, which combines it with metals to produce empty conduit shells and immediately pushes them right into the first Fluid Transposer. Once filled with Destabilized Redstone, the conduit moves right again into the second Sequential Fabricator to be jacketed in Enderium, before sliding into the final Fluid Transposer for its Gelid Cryotheum bath and ejecting into the Output Strongbox.
Using the Pattern Validation augment inside the Sequential Fabricators is critical for preventing resource starvation and slot overflow. Without it, a high-tierServo on the Input Strongbox would flood the Fabricator's internal buffer with a single type of ingot, leaving no room for the Hardened Glass or nuggets required to complete the crafting pattern.
Upgrades and scaling
- Replace the Input Strongbox with a Applied Energistics 2 ME Interface or Refined Storage Interface to supply raw metals, redstone, and cryotheum dust automatically on-demand.
- Add a third Magma Crucible and Fluid Transposer pair dedicated to Energized Glowstone and Enderium to expand the hub into an automated Resonance and Signalum Machine Frame factory.
- Install Flux Linkage Concentrators alongside Auxiliary Reception Coils in the Magma Crucibles if power generation is no longer an issue and you want maximum melting speed.
Common mistakes
- Forgetting to install the Pattern Validation augment in the Sequential Fabricators, which inevitably leads to one ingredient filling every internal slot and jamming the line.
- Leaving the Fluid Transposers in 'Empty' mode instead of 'Fill' mode; check the fluid droplet toggle button in the center of the Transposer GUI.
- Using standard Opaque Fluiducts for Gelid Cryotheum or Destabilized Redstone if you choose not to stack the machines vertically—these extreme-temperature fluids will shatter basic lead/copper pipes unless you use Hardened or Super-Laminar Fluiducts.
- Failing to lock the input slots on the Induction Smelter, which allows two stacks of Lead Ingots to enter both slots and halts Hardened Glass production.
FAQ
Why are my items not transferring directly from one machine to the next?
Open the Configuration tab (gear icon) on both machines. Ensure the sending machine has its adjacent side set to Orange (Output) and the Auto-Output toggle button enabled, while the receiving machine has its touching side set to Blue (Input).
How much Redstone and Cryotheum dust do I need per Fluxduct?
Standard Thermal Dynamics recipes usually require 200 mB of Destabilized Redstone (2 Redstone Dust) and 500 mB of Gelid Cryotheum (2 Cryotheum Dust) per conduit craft, though yields normally come in batches of 6. Always check JEI in your specific modpack to verify exact fluid ratios.
Can I use this same setup to craft Signalum or Resonant Cell Frames?
Yes, the principle is identical. You simply swap the Sequential Fabricator recipes to craft the empty Cell Frames and keep the Magma Crucibles stocked with Redstone, Glowstone, or Ender Pearls depending on the tier required.