Thermal Expansion · Mid game
Cinnabar & Rich Slag 4x Ore Processing Factory
This mid-game Thermal Expansion factory transforms raw ores into triples and quadruples of ingots while generating a self-sustaining loop of Cinnabar and Rich Slag. By combining a Tectonic Carrier Pulverizer to process Redstone and Gold Ore for Cinnabar, alongside an Induction Smelter processing high-value ores, you maximize the yield of rare metals like Platinum, Iridium, and Diamonds without manual crafting. It is the ideal bridge between basic 2x ore doubling and sprawling end-game processing lines.
- Footprint
- 7x5x3 blocks
- Power
- ~600-1,200 RF/t depending on upgrade kits and augments
- Throughput
- ~1 ore every 3-5 seconds (check JEI for exact recipe ticks)
- Difficulty
- intermediate
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Pulverizer | 2 |
| Induction Smelter | 2 |
| Redstone Furnace | 1 |
| Magma Crucible | 1 |
| Igneous Extruder | 1 |
| Reinforced Upgrade Kit | 6 |
| Augment: Tectonic Initiator | 1 |
| Augment: Auxiliary Sieve | 5 |
| Hardened Energy Cell | 1 |
| Cache | 2 |
| Chest | 2 |
| Impulse Itemduct | 16 |
| Hardened Fluiduct | 4 |
| Hardened Fluxduct | 12 |
| Hardened Servo | 4 |
| Reinforced Filter | 5 |
| Crescent Hammer | 1 |
Build it step by step
1Lay the Machine Row and Power Spine
Place your two Pulverizers, two Induction Smelters, one Redstone Furnace, and one Magma Crucible in a horizontal line with one block of space behind them. Run a line of Hardened Fluxducts along the back of every machine and connect them to your Hardened Energy Cell. Place the Igneous Extruder directly above the second Induction Smelter.
2Install Upgrade Kits and Augments
Apply Reinforced Upgrade Kits (or higher) to the two Pulverizers, two Induction Smelters, and the Redstone Furnace so they can hold multiple augments. Install the Tectonic Initiator augment into the second Pulverizer, and put Auxiliary Sieves into the first Pulverizer and both Induction Smelters to greatly boost secondary output chances.
3Set Up the Petrotheum Loop
Connect the Magma Crucible to the Tectonic Initiator Pulverizer using Hardened Fluiducts. Configure the Crucible's output side to Orange (Auto-Output) toward the Fluiduct, and set the Pulverizer's connected side to Blue (Input). Feed Petrotheum Dust into the Magma Crucible to melt it into Tectonic Petrotheum fluid.
4Configure the Sand and Rich Slag Line
Set the Igneous Extruder to generate Sand (check JEI for water/lava requirements depending on your modpack version; modern Thermal versions only need adjacent water and lava blocks to make cobble, which you can pulverize into sand if needed). Configure its bottom face to Orange so it drops Sand directly into the Blue top face of the second Induction Smelter below it. Place a Cache next to this Smelter to catch the Rich Slag from its Yellow (Secondary Output) face.
5Configure the Cinnabar Pulverizer
On the first Pulverizer, set the top face to Blue (Input), the right face to Red (Primary Output), and the bottom face to Yellow (Secondary Output). Place the Redstone Furnace directly to its right to automatically receive and smelt pulverized dusts, and place a Cache below the Pulverizer to store the Cinnabar generated from processing Redstone and Gold ores.
6Wire the Primary 4x Induction Smelter
On the first Induction Smelter, lock the flux input slot (using the lock icon in the GUI) so it only accepts Cinnabar or Rich Slag in the left slot, and raw ores in the right slot. Pipe Cinnabar from the Cinnabar Cache and Rich Slag from the Slag Cache into a Green (Split Input) face on this Smelter using Itemducts and Servos.
7Apply Itemduct Filters for Smart Ore Routing
Connect your Input Chest to the top of both Pulverizers and both Induction Smelters using Impulse Itemducts. Install Reinforced Filters on each machine connection: whitelist Redstone and Gold Ore into Pulverizer 1; common ores (Iron, Copper) into the Tectonic Pulverizer 2; bulk ores (Lead, Silver) into the Sand Induction Smelter; and rare ores (Nickel, Platinum/Shiny, Diamond, Gold) into the Cinnabar Induction Smelter.
8Connect the Final Output Collection
Run a separate line of Impulse Itemducts from the primary and secondary output faces of the Redstone Furnace and both Induction Smelters into your Output Chest. Ensure the primary 4x Induction Smelter has both its Red and Yellow outputs merged (set face to Orange) so both the main 3x ingots and the guaranteed 1x secondary ingots enter the Output Chest.
How it works
Thermal Expansion does not rely on a single linear multiblock line for 4x ore multiplication; instead, it uses a clever symbiotic loop of specialized Catalysts. When you smelt an ore with Sand in an Induction Smelter, you get 2x ingots and a small chance at Rich Slag. Meanwhile, pulverizing Redstone Ore or Gold Ore inside a Pulverizer fitted with Auxiliary Sieves gives a generous chance to yield Cinnabar as a secondary byproduct.
Both Rich Slag and Cinnabar act as high-tier fluxes when fed into the primary Induction Smelter. Smelting an ore with Rich Slag yields 3x primary ingots and a chance at a secondary metal dust/ingot. Even better, smelting an ore with Cinnabar yields 3x primary ingots AND guarantees (100% chance) a secondary metal output—effectively giving you 4x total metal ingots per raw ore (for instance, 1 Nickel Ore + 1 Cinnabar = 3 Nickel Ingots + 1 Platinum Ingot).
For standard ores where secondary outputs are less critical, the second Pulverizer uses the Tectonic Initiator augment fed by liquid Tectonic Petrotheum. This specialty augment boosts the Pulverizer's base yield from 2x dust straight to 3x pulverized dust per ore at the cost of extra RF and a small trickle of Petrotheum fluid, feeding directly into the Redstone Furnace for effortless 3x ingot production.
Upgrades and scaling
- Upgrade all machines to Signalum or Resonant tier with Resonant Upgrade Kits to open up four augment slots per machine.
- Fill remaining augment slots with Auxiliary Reception Coils to drastically increase processing speed, combined with additional Auxiliary Sieves to push Rich Slag and Cinnabar byproduct rates near their maximum cap.
- Add a Compactor with a Gearworking Die or Coin Minting setup on the output chest to automatically compress excess metals.
- Automate Petrotheum Dust production using a Fluid Transposer, Pulverizer (for Obsidian and Basalz Rods), and a Sequential Fabricator so the Magma Crucible never runs dry.
Common mistakes
- Forgetting to click the 'Lock Flux Slot' button inside the Induction Smelter GUI, which causes ores to clog both input slots and halts production.
- Using the Tectonic Initiator augment alongside Auxiliary Sieves on the same Pulverizer without realizing that Tectonic Initiator disables secondary outputs in some modpack configurations (always check JEI and augment tooltips).
- Leaving Auto-Input and Auto-Output sides mismatched when placing machines directly adjacent to each other, causing items to backstuff into the wrong slots.
- Running all ores through Cinnabar indiscriminately—Cinnabar is best saved for ores with rare secondary byproducts like Nickel (for Platinum/Shiny) or Gold (for Copper/Cinnabar loops), while Rich Slag or Petrotheum handles basic Iron and Tin.
FAQ
How do I get my first batch of Cinnabar to start the system?
Feed Redstone Ore, Gold Ore, or Nether Quartz Ore through a Pulverizer equipped with Auxiliary Sieve augments, or freeze Destabilized Redstone and Gelid Cryotheum depending on your modpack's recipes (check JEI for Cinnabar uses and sources).
Why isn't my Tectonic Initiator Pulverizer producing 3x dust?
The Tectonic Initiator augment requires both a steady supply of Tectonic Petrotheum fluid inside the Pulverizer's internal tank and significantly more RF/t per operation; if the fluid tank runs empty, the machine stops or reverts to normal operation.
Can I get 4x of the exact same ingot from one ore?
In standard Thermal Expansion, Cinnabar gives 3x of the primary ingot plus 1x of the associated secondary ingot (4x total metal). However, for non-metal ores like Diamond or Emerald, smelting the ore with Cinnabar can yield higher direct gem counts—check JEI for exact output numbers in your version.