XNet · Late game
Mekanism 5x Ore Processing Factory with XNet Gases
This setup streamlines Mekanism's notoriously messy 5x ore processing chain into a single-cable network using XNet and the XNet Gases addon. By routing items, fluids, gases, slurries, and Forge Energy through Advanced Connectors, you completely eliminate the lag and visual clutter of overlapping Pressurized Tubes and Logistical Transporters. It provides a compact, modular late-game factory that processes raw ores into quintuple ingots with surgical precision.
- Footprint
- 7x3x3 blocks (excluding external acid production)
- Power
- ~15-30 kFE/t depending on Speed Upgrades (check JEI)
- Throughput
- High, scales directly with Tier Installers and Upgrades
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Controller (XNet) | 1 |
| Advanced Connector (Blue) | 16 |
| Network Cable (Blue) | 20 |
| Chemical Dissolution Chamber | 1 |
| Chemical Washer | 1 |
| Chemical Crystallizer | 1 |
| Chemical Injection Chamber | 1 |
| Purification Chamber | 1 |
| Crusher | 1 |
| Enrichment Chamber | 1 |
| Energized Smelter | 1 |
| Basic / Advanced / Elite Tier Installer | 15 |
| Ultimate Chemical Tank | 3 |
| Ultimate Energy Cube | 1 |
| Chest (or Storage Drawer/Crate) | 2 |
| Water Source (Sink or Pump) | 1 |
| Speed Upgrade (Mekanism) | 64 |
| Energy Upgrade (Mekanism) | 64 |
| Gas Upgrade (Mekanism) | 16 |
Build it step by step
1Place the Processing Line
Arrange the 8 Mekanism processing machines in a tight 8x1 row or a compact 4x2 back-to-back grid: Chemical Dissolution Chamber, Chemical Washer, Chemical Crystallizer, Injection Chamber, Purification Chamber, Crusher, Enrichment Chamber, and Energized Smelter. Apply your Tier Installers to turn the last five machines into Factories.
2Connect the XNet Backbone
Place an XNet Advanced Connector on the back of every machine, as well as on your Input Chest, Output Chest, Water Source, Energy Cube, and the three Chemical Tanks holding Sulfuric Acid, Hydrogen Chloride, and Oxygen. Link all connectors together using Blue Network Cables and attach the XNet Controller to the line.
3Configure Mekanism Machine Sides
Open each Mekanism machine's GUI and clear all strict side configurations, or specifically set the side facing the Advanced Connector to Input/Output for all relevant types. Remember that because we are using Advanced Connectors, XNet can bypass sidedness and access the Top, Bottom, or Front virtual sides of a Mekanism block directly from the back.
4Setup Channel 1: Energy & Water
In the XNet Controller, set Channel 1 to 'xnet.energy'. Set the Energy Cube to Extract and all 8 Mekanism machines to Insert. Set Channel 2 to 'xnet.fluid', set your Water Source to Extract, and set the Chemical Washer to Insert.
5Setup Channel 3: Chemical Reagents
Set Channel 3 to the Mekanism Gas channel type (added by XNet Gases). Set the three Chemical Tanks to Extract. Configure the Dissolution Chamber to Insert filtered to Sulfuric Acid, the Injecting Factory to Insert filtered to Hydrogen Chloride, and the Purifying Factory to Insert filtered to Oxygen (remember to specify the 'Extra' input face in the XNet connector settings if your Mekanism machine requires a specific face for gas input).
6Setup Channel 4: Slurry Routing
Set Channel 4 to the Mekanism Slurry channel type (or shared Gas channel depending on your modpack version). Set the Dissolution Chamber to Extract Dirty Slurry and the Chemical Washer to Insert it. On the same channel, set the Chemical Washer to Extract Clean Slurry and the Chemical Crystallizer to Insert it.
7Setup Channel 5: Item Progression
Set Channel 5 to 'xnet.item' in Round Robin or Priority mode. Set the Input Chest to Extract (using a stack size of 3 for raw ores to prevent partial slurry locking) and the Dissolution Chamber to Insert. Next, set every machine from the Crystallizer down to the Smelter to both Extract and Insert, using item filters (Crystals, Shards, Clumps, Dirty Dusts, Clean Dusts) so items move strictly down the chain and finally into the Output Chest.
How it works
Normally, a 5x Mekanism setup is a spaghetti nightmare because Mekanism blocks often have strict side requirements for gases, slurries, items, and fluids. By utilizing XNet's Advanced Connectors alongside the XNet Gases addon, a single cable block touching the back of each machine can simulate interactions with all six sides of that machine. If a Purification Chamber insists on receiving Oxygen from the bottom and items from the top, you simply select 'Down' and 'Up' inside the XNet Controller GUI while only physically connecting to the back.
The item channel acts as a unified conveyor belt. Instead of needing seven separate item channels for each step of the ore chain, a single item channel handles the entire factory by leveraging item filters or NBT tags (such as the forge:crystals or forge:shards tags). Because a Crystal can only enter the Injecting Factory, and a Shard can only enter the Purifying Factory, every machine can safely be set to both Extract and Insert on the exact same channel without cross-contaminating the line.
Crucially, the first three machines (Dissolution, Washer, Crystallizer) cannot be turned into multi-slot Factories and only process one ore type at a time. XNet prevents the notorious 'leftover slurry deadlock' by restricting the Input Chest's extraction rule to only pull in exact multiples (like 3 Raw Ores at a time, check JEI for your pack's exact ratio) and using the 'Count' limit on the Dissolution Chamber's insert rule so a new ore type never enters until the previous batch has completely dissolved.
Upgrades and scaling
- Parallel Head Units: Because the Dissolution, Washer, and Crystallizer cannot accept Tier Installers, they will bottleneck your Elite or Ultimate Factories. Add 2 or 3 extra sets of these three chemical machines onto the same XNet cable and use color-coded routing or filtered input chests to process Iron, Gold, and Copper simultaneously.
- Integrated Acid Sub-Network: Use an XNet Router and a second XNet Controller to bring the Sulfuric Acid, Hydrogen Chloride, and Oxygen production machines (Electrolytic Separators, Chemical Oxidizers, Chemical Infusers) directly into the build, keeping the 8-channel limit clean.
- Ultimate Tier & Gas Upgrades: Upgrade all five solid-processing machines to Ultimate Factories, and install 8x Gas Upgrades into the Dissolution, Injecting, and Purifying machines to dramatically cut down your Sulfuric Acid and Hydrogen Chloride consumption.
Common mistakes
- Using Standard Connectors instead of Advanced Connectors: Standard connectors cannot spoof block sides and have lower transfer rates. Mekanism machines almost always require side-spoofing to accept both items and gases from a single cable connection.
- Slurry Deadlocking: Feeding non-multiple quantities of Raw Ore into the Dissolution Chamber leaves 100-200mB of Clean Slurry stuck in the Crystallizer, blocking all other ore types. Always set XNet's extraction mode on the Raw Ore chest to 'Exact' stack sizes that result in full multiples of 200mB slurry.
- Forgetting Mekanism Auto-Eject: Always turn OFF 'Auto-Eject' inside every Mekanism machine GUI. Let XNet pull the items and gases out; if Mekanism tries to push into an XNet connector, it can cause weird voiding or ticking lag.
- Mismatched Virtual Sides: If a gas refuses to insert via XNet, open the Mekanism machine's Side Config tab (for Gases/Infuse/Slurry) and check which color corresponds to which face, then ensure the XNet Controller has that exact face selected in the connector dropdown.
FAQ
Why don't I see Gas or Slurry channels in my XNet Controller?
Base XNet only supports Items, Fluids, Energy, and Logic. You must have the 'XNet Gases' addon mod installed in your modpack to expose Mekanism's Gases, Slurries, Infuse Types, and Pigments to the Controller.
How do I stop my Factories from getting clogged with 5 different ore types?
Enable 'Auto-Sort' inside the GUI of your Injecting, Purifying, Crushing, Enriching, and Smelting Factories, and limit the XNet Item Insert 'Max' count to 1 or 3 so XNet doesn't flood all 7 or 9 slots with a single ore type before auto-sort can divide them.
Can one XNet Controller handle the acid generation and the 5x processing line together?
Technically yes, by merging all items onto one channel, all fluids onto another, and all gases onto a third using strict filters. However, it is much cleaner to use two Controllers linked via an XNet Router so your acid production doesn't steal transfer ticks from the main ore line.