XNet · End game

Multi-Network Fission Reactor & Waste Facility

This end-game setup utilizes XNet Routers and Wireless Routers to bridge multiple independent sub-networks into one unified nuclear facility. It cleanly separates high-volume reactor coolant loops, hazardous waste extraction, and automated fuel synthesis while enforcing a hardware-level logic shutoff if the reactor core destabilizes. Building this ensures zero cable clutter and guarantees your base won't become a radioactive crater due to a single clogged pipe or overloaded controller.

Footprint
21x15x8 blocks (split across two safety zones)
Power
~500 FE/t for XNet infrastructure (check JEI for modpack settings)
Throughput
Max integer limit fluid/gas transfer via Advanced Connectors; continuous fuel and waste processing
Difficulty
advanced

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

Forge Energy (FE)Uranium / Fluorite / SFissile Fuel (PublisheRouting Network DataRF TransmissionWireless Channel BridgRF ReceptionRouting Network DataBridged Fuel & SCRAM LFissile Fuel & Water CSuperheated SteamRecycled WaterNuclear WasteHigh Temp / Damage SenEnergy Source (Flux Plug/ Battery)POWERController (FuelSynthesis Net)CONTROLRaw Ore Storage (Chest /Drawer)INPUTFuel Processing ArrayMACHINERouter (Synthesis Side)LOGISTICSWireless Router(Transmitter)LOGISTICSAntenna Dish(Transmitter)LOGISTICSAntenna Dish (Receiver)LOGISTICSWireless Router(Receiver)LOGISTICSRouter (Reactor Side)LOGISTICSController (Reactor &Coolant Net)CONTROLFission Reactor PortsMACHINESteam Turbine &Condenser LoopMACHINERadioactive WasteBarrelsOUTPUT
InputMachinePowerLogisticsOutputControlItemFluidGasEnergySignal

Materials

ItemCount
Controller2
Router2
Wireless Router2
Antenna Base2
Antenna4
Antenna Dish2
Advanced Connector (Blue)18
Advanced Connector (Yellow)6
Advanced Connector (Red)4
Network Cable (Blue)64
Network Cable (Yellow)32
Routing Network Cable12
Connector UpgradeKit8
Facade32

Build it step by step

  1. 1Establish the Fuel Synthesis Sub-Network

    Place your first XNet Controller near your chemical and ore processing machines. Run Blue Network Cables and attach Blue Advanced Connectors to your raw ore storage, enrichment chambers, and final fuel output tanks. Power the Controller using a dedicated energy connector on Channel 1.

  2. 2Configure Fuel Production Channels

    Inside the first Controller GUI, set up an Item Channel to distribute Uranium, Fluorite, and Sulfur from your input chests to their respective machines. Create Fluid and Gas Channels (if using an integration addon like XNet Gases) to move intermediate chemicals into the final Fissile Fuel tank.

  3. 3Build the Reactor & Coolant Sub-Network

    At a safe distance from your main base, construct your Fission Reactor, Turbine, and Waste Processing array. Place the second XNet Controller and wire up all reactor input/output ports, turbine vents, and waste barrels using Yellow Network Cables and Yellow Advanced Connectors.

  4. 4Program the High-Rate Coolant Loop

    In the Reactor Controller, dedicate a Fluid Channel to extract condensed water from your Turbine vents and insert it directly into the Reactor Coolant Port at the fastest tick rate (10t or 1t depending on connector tier). Dedicate a separate channel to pull Superheated Steam from the reactor directly into the Turbine input.

  5. 5Set Up the Emergency Logic SCRAM

    Create a Logic Channel (xnet.logic) in the Reactor Controller. Attach an Advanced Connector to the Reactor Logic Adapter (set to output redstone on High Temperature or Excess Waste) and add a sensor measuring redstone > 0, outputting Color 'Red'. Attach another connector to the Reactor Activation Port, set it to only emit a continuous Redstone active signal when Color 'Red' is FALSE (using a NOT gate filter or inverse redstone mode).

  6. 6Install the Local Routers

    Place one XNet Router adjacent to the Synthesis Controller and another Router adjacent to the Reactor Controller. Connect each Controller to its respective Router using Routing Connectors and Routing Network Cables (the white/gray cables). Do not let the colored cables from the sub-networks touch the Routing Cables directly.

  7. 7Erect the Wireless Antenna Towers

    Next to each Router, place a Wireless Router and connect it into the local Routing Network Cable line. On top of each Wireless Router, place an Antenna Base, stack two Antenna blocks vertically, and cap the top with an Antenna Dish. Ensure both Wireless Routers receive ample Forge Energy via your local power channels, as wireless transmission consumes ongoing FE/t.

  8. 8Publish and Bridge the Remote Channels

    Open the Synthesis Controller, select the Fissile Fuel output channel, and type 'fuel_feed' into the Publish box at the top right. Open the Synthesis Router, verify 'fuel_feed' appears, and ensure the Wireless Router is broadcasting it on a public or private frequency. Finally, open the Reactor Controller, create a new Remote Channel (xnet.remote), select 'fuel_feed' from the Router list, and set it to insert directly into the Reactor Fuel Port.

How it works

A single XNet Controller is strictly limited to 8 internal channels. When managing a complex end-game Fission Reactor alongside multi-step chemical fuel production, 8 channels are quickly exhausted by item inputs, energy distribution, chemical gases, water coolant, steam return, waste tapping, and logic monitoring. By splitting the build into two separate Controllers—one for Synthesis and one for the Reactor Core—you double your capacity to 16 local channels while keeping hazardous nuclear operations physically isolated from your main factory.

The magic bridging these two facilities is the XNet Routing Network. Standard colored Network Cables carry local signals, whereas Routing Network Cables connect Controllers to Routers. By typing a unique name into the 'Publish' field inside a Controller, that specific channel becomes visible to the attached Router. Because our two facilities are far apart, the Routers pass this published data into Wireless Routers topped with Antenna Dishes, beaming the fuel channel across dimensions or hundreds of blocks without laying a single connecting pipe.

Safety is enforced locally on the Reactor Controller using an XNet Logic Channel. Because the coolant loop and logic sensors live on the same dedicated controller at the reactor site, wireless power loss or chunk-unloading at your synthesis base will never interrupt the reactor's emergency shutoff. The Logic Channel constantly polls the reactor's internal temperature and waste capacity; the microsecond a threshold is breached, it toggles an internal color variable (Red), immediately dropping the redstone activation signal and halting fission before a meltdown occurs.

Upgrades and scaling

  • Upgrade standard Connectors to Advanced Connectors using Connector Upgrade Kits right-clicked in-world; this unlocks faster operation intervals (down to every single tick), boosts maximum transfer capacities, and allows access to any block face remotely.
  • Add a second Logic Sensor checking an Energy Storage cell (e.g., Induction Matrix) to automatically throttle or shut off the reactor when your base's energy buffer reaches 95% capacity, conserving nuclear fuel.
  • Deploy Red Network Cables and Facades around the reactor perimeter to wire up alarm sirens and RFTools Screens that display live fuel and waste levels pulled from published logic channels.

Common mistakes

  • Exceeding the 32-channel Router limit: While connecting multiple controllers to a Router is powerful, a single Routing Network can only hold 32 published channels total across all connected controllers.
  • Forgetting to power the Wireless Routers: Unlike standard XNet Routers which require no power, Wireless Routers require a constant FE/t supply to keep the antenna link active, scaling with distance.
  • Crossing cable colors with Routing Cables: Never use standard colored connectors to attach a Controller to a Router; you must connect the Controller to the Router using a Routing Network Cable and Routing Connectors.
  • Forgetting to name the Published Channel: A Router will completely ignore a Controller's channel unless you explicitly type an identifier string into the 'Publish' text box inside the Controller's channel settings.
  • Using standard Connectors for Reactor Coolant: Standard connectors have lower fluid transfer caps and slower tick rates; always use Advanced Connectors for reactor water/steam loops to prevent instant overheating.

FAQ

Why isn't my published channel showing up in the second Controller?

Ensure both Controllers are connected to their respective Routers using Routing Network Cables (not colored cables), confirm you typed an exact name into the 'Publish' box on the first Controller, and verify you created a 'Remote' channel type in the receiving Controller.

What is the difference between a single Antenna and an Antenna Dish on the Wireless Router?

A single Antenna (1 high) provides a short wireless range, a double Antenna (2 high) reaches medium distances, and capping a two-high column with an Antenna Dish enables unlimited range, including cross-dimensional transmission, at the cost of higher FE/t consumption (check JEI/config for exact values).

Can XNet transport Mekanism Radioactive Waste and Fissile Fuel directly?

Yes, provided your modpack includes the 'XNet Gases' addon mod, which adds a dedicated Gas channel type. However, note that in modern Mekanism versions, Spent Nuclear Waste typically cannot be teleported across dimensions or held in internal buffers, so keep your Waste Barrels wired locally on the Reactor Controller rather than sending waste over the Wireless Router.

More XNet designs

XNet · Late gameApplied Energistics 2 Inscriber & Furnace MatrixThis setup pairs XNet's advanced connectors with a single Applied Energistics 2 ME Interface to drive a high-speed processing array of Inscribers and powered furnaces. By offloading item routing and sided insertion to XNet, you can operate dozens of machines while consuming only a single AE2 channel. It is the ultimate late-game solution for eliminating processor crafting bottlenecks without sprawling ME cable networks.Advanced8 steps
XNet · Mid gameYNot Botania Mana Generation & Runic Altar HubThis setup leverages XNet alongside the YNot addon to fully automate Botania's Runic Altar and Mana distribution through a single, compact cable network. By replacing bulky Mana Spreaders and complex vanilla redstone with XNet channels, you can effortlessly craft runes on demand without the usual spaghetti of floating flowers and droppers. It is an essential mid-game hub for keeping your botanical resources stocked while saving massive amounts of base space.Intermediate7 steps
XNet · Late gameMekanism 5x Ore Processing Factory with XNet GasesThis setup streamlines Mekanism's notoriously messy 5x ore processing chain into a single-cable network using XNet and the XNet Gases addon. By routing items, fluids, gases, slurries, and Forge Energy through Advanced Connectors, you completely eliminate the lag and visual clutter of overlapping Pressurized Tubes and Logistical Transporters. It provides a compact, modular late-game factory that processes raw ores into quintuple ingots with surgical precision.Advanced7 steps
XNet · Mid gameSelf-Sustaining Bio-Fuel Power PlantThis setup leverages an XNet Controller to fully automate a closed-loop ethylene bio-fuel power plant using a single cable line. By separating item, fluid, gas, and energy routing onto dedicated XNet channels, you eliminate messy pipe spaghetti while generating massive amounts of mid-game RF. Once primed with a small kick of power and water, the system feeds itself indefinitely and exports the substantial surplus energy to your main base.Intermediate7 steps
XNet · Early gameSingle-Cable 3x Ore Processing LineEliminate early-game cable spaghetti by routing energy, fluids, gases, and items through a single network line using XNet. This setup achieves full 3x ore processing with Mekanism machines in a flat, wall-friendly footprint. By using a single Controller and hidden connectors, you save valuable early resources and keep your base looking completely clean.Beginner7 steps