Oritech · Late game

Automated Laser Gantry & Circuit Assembly Hub

This late-game setup automates the production of high-tier Oritech components, including Advanced Microchips, Flux Gates, and high-level Machine Cores. By combining a multi-block Assembler structure with an array of Enderic Lasers and Drone Ports, it eliminates the tedious manual crafting bottlenecks required for endgame machinery and Particle Accelerators.

Footprint
13x11x6 blocks
Power
High RF/t demand (check JEI for exact laser and core modifiers)
Throughput
Continuous batch processing of circuits and cores
Difficulty
advanced

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

RF Energy via SuperconHigh-Voltage RF EnergyRF Energy via Energy PSilicon, Nickel, PlatiRaw Metals & SiliconElectrum, Adamant, andFluxite & Silicon WafeFocused Enderic Laser Advanced Microchips & Structural Alloys & PlSpeed and Efficiency MFinished Machine CoresSuperconductor PowerBankPOWERDrone Port (Raw MaterialIntake)INPUTItem Filter & BufferChestsLOGISTICSFoundry (Multi-block)MACHINEAtomic ForgeMACHINEEnderic Laser ArrayMACHINEAssembler (Multi-block)MACHINEMachine Core Socket &AddonsCONTROLStorage Hub (FinalOutput)OUTPUT
InputMachinePowerLogisticsOutputControlItemEnergySignal

Materials

ItemCount
Assembler2
Atomic Forge1
Foundry2
Enderic Laser4
Machine Core (Tier 4 or higher)18
Drone Port1
Superconductor Cable32
Item Pipe40
Item Filter4
Speed Addon6
Efficiency Addon4
Acceptor Addon2
Large Energy Storage1
Chest or Storage Barrel6

Build it step by step

  1. 1Lay the Power Foundation

    Place your Large Energy Storage at the rear edge of the 13x11 footprint. Run a central spine of Superconductor Cables down the middle of the floor, as the Atomic Forge and Enderic Lasers require massive energy throughput that basic Energy Pipes cannot sustain.

  2. 2Construct the Multi-block Foundries

    On the left side of the power spine, place two Foundry controllers with enough clearance for their full multi-block structures. Right-click the controllers to project the holographic guides and fill in the required Machine Cores to form the structures.

  3. 3Set Up the Atomic Forge and Laser Gantry

    Position the Atomic Forge near the center of the hub and complete its multi-block requirements. Build a raised frame three blocks away using standard building blocks and mount the four Enderic Lasers facing directly toward the Atomic Forge's receptor.

  4. 4Build the Assembler Line

    On the right side of the power spine, place two Assembler controllers and complete their multi-block Gantry structures using high-tier Machine Cores. Ensure their input and output hatches are accessible from the central logistics aisle.

  5. 5Install Machine Addons

    Attach Speed Addons and Efficiency Addons directly to the exposed addon ports on the Foundry, Atomic Forge, and Assembler multi-blocks. Place Acceptor Addons on the Atomic Forge if needed to manage the laser energy transfer properly.

  6. 6Establish the Drone Intake and Filtering

    Place the Drone Port at the front corner of the setup to receive raw Silicon, Fluxite, Platinum, and base metals from your mining outposts. Connect the Drone Port to a row of buffer chests using Item Pipes and Item Filters to separate raw metals from circuit substrates.

  7. 7Connect Inter-Machine Logistics

    Run Item Pipes from the filtered metal chests into the Foundries to produce alloys like Adamant, Biosteel, and Electrum. Route the Foundry outputs so that half of the alloys go to the Atomic Forge for microchip etching and the other half go directly to the Assemblers.

  8. 8Finalize Output Routing

    Connect the output slot of the Atomic Forge directly into the input hatches of the two Assemblers. Finally, run an Item Pipe line from the Assembler outputs to your final storage barrels at the front of the hub.

How it works

Oritech's late-game progression relies heavily on multi-step components that require both heavy metallurgy and precision laser crafting. In this setup, the Drone Port acts as a wireless bridge from your processing plant, dumping raw materials into a localized sorting manifold. The Item Filters prevent machine lockups by ensuring only valid alloy pairings enter the Foundries, while Silicon and Fluxite bypass smelting to wait at the Atomic Forge.

The Atomic Forge cannot operate on standard cable power alone for high-tier recipes; it requires direct energy injection from the Enderic Laser Array. When materials enter the Atomic Forge, the four Enderic Lasers draw power from the Superconductor spine and fire continuous beams into the forge, rapidly fabricating Advanced Microchips and high-density circuits.

Once the Atomic Forge finishes etching the microchips, Item Pipes immediately pull them into the multi-block Assemblers alongside structural alloys from the Foundries. By splitting the workload across two Assemblers equipped with Speed Addons, one unit can be dedicated to crafting intermediate parts like Flux Gates and Motors, while the second unit combines them into finalized Machine Cores.

Upgrades and scaling

  • Upgrade all structural Machine Cores inside the Assemblers and Foundries to the highest tier available in JEI to unlock additional addon slots and base speed multipliers.
  • Expand the Enderic Laser Array from 4 to 8 lasers around the Atomic Forge to dramatically reduce the crafting time of endgame processors.
  • Add Inventory Proxy Addons to the multi-blocks to give yourself extra sides for inserting and extracting items if pipe congestion occurs.
  • Integrate an Oritech Things logic or redstone control loop to shut off the Enderic Lasers when the output storage chests are full, saving standby power.

Common mistakes

  • Using standard Energy Pipes instead of Superconductor Cables for the Enderic Lasers, which starves the lasers of RF and stalls the Atomic Forge.
  • Forgetting to leave an unobstructed line of sight between the Enderic Lasers and the target machine, which blocks the beam and halts production.
  • Feeding unfiltered items into the 2-slot Foundry without an Item Filter, causing both input slots to fill with the same metal and preventing alloy creation.
  • Placing multi-block controllers too close together before checking their holographic footprint, resulting in overlapping Machine Core requirements.

FAQ

Why isn't my Assembler or Foundry forming after I place the controller?

Oritech machines are multi-blocks that require specific tiers of Machine Cores placed in adjacent spots. Right-click the unformed controller to view the holographic guide and place the cores accordingly.

How do I aim the Enderic Lasers at the Atomic Forge?

Ensure the laser faces the target generally, then use the mod's wrench or linking tool to bind the Enderic Laser directly to the Atomic Forge block.

Can I add more Speed Addons to a single machine?

The number of addons a machine can support depends on the tier of the Machine Cores used to build it and whether you have attached Extender Addons to increase its capacity.

More Oritech designs