Oritech · End game

Endgame Particle Accelerator & Petrochemical Power Plant

This endgame build merges a high-capacity Petrochemical Power Plant with a massive Oritech Particle Accelerator ring to automate high-energy matter synthesis. By refining raw Crude Oil into high-density Turbofuel to drive a bank of Fuel Generators, the system sustains the colossal power demands required to accelerate particles to collision velocities. It serves as the ultimate backbone for producing endgame Oritech materials like Plutonium and Prometheum, as well as any custom high-Joule KubeJS collision recipes.

Footprint
35x35x8 blocks (scalable with ring size)
Power
Generates and consumes ~50-150 kRF/t at peak collision load (check JEI for recipe Joule demands)
Throughput
1-4 high-energy collisions per minute depending on ring diameter
Difficulty
advanced

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

Crude OilFluxite / Refining CatRefined Diesel / NaphtHigh-Energy AdditiveTurbofuelTurbofuelHigh-Voltage RF/FERF/FE PowerRF/FE PowerRF/FE PowerPayload Particle APayload Particle BKinetic AccelerationKinetic AccelerationVelocity Redstone InteSynthesized Endgame MaPumpblock (Crude OilWell)INPUTCentrifuge (FluidModule)MACHINEAtomic Forge / ChemicalReactorMACHINESmall Fluid Tank(Turbofuel Buffer)STORAGEFuel Generator ArrayPOWERLarge Energy StorageSTORAGESupply Chest (Catalysts& Fluxite)INPUTAccelerator Controller(Ring A - CW)MACHINEAccelerator Controller(Ring B - CCW)MACHINEAccelerator Motor ArrayMACHINEAccelerator SensorCONTROLOutput Storage ChestOUTPUT
InputMachinePowerStorageOutputControlItemFluidEnergySignal

Materials

ItemCount
Accelerator Controller2
Accelerator Ring120
Accelerator Motor16
Accelerator Sensor2
Fuel Generator6
Centrifuge4
Machine Core Tier 6 (or highest tier)14
Fluid Addon6
Speed Addon12
Efficiency Addon8
Large Energy Storage4
Small Fluid Tank4
Superconductor Cable64
Fluid Pipe48
Item Pipe32
Machine Extender12
Pumpblock1

Build it step by step

  1. 1Establish Crude Oil Extraction

    Locate an underground Oritech Crude Oil spring and place a Pumpblock above the reservoir. Extend the pump pipe down into the liquid and supply it with initial baseline power. Run Fluid Pipes from the Pumpblock back to your main facility's petrochemical processing bay.

  2. 2Construct the Petrochemical Refinery

    Place four Centrifuges equipped with Machine Extenders and Fluid Addons to process the incoming Crude Oil. Connect Item Pipes to feed Fluxite and catalysts into the refining chain as required by your specific fuel upgrade path (check JEI for exact fluid ratios). Route the refined fuel output into a bank of Small Fluid Tanks to serve as a buffer.

  3. 3Assemble the Fuel Generator Power Plant

    Build an array of six Fuel Generators adjacent to your fuel buffer tanks. Attach high-tier Machine Cores, Speed Addons, and Efficiency Addons to each generator to maximize RF/t extraction per bucket of Turbofuel. Connect the fluid output of the tanks directly into the generators using Fluid Pipes.

  4. 4Install the Superconductor Power Grid

    Place four Large Energy Storage multiblocks between the power plant and the accelerator construction zone. Connect the Fuel Generators to the inputs of the Large Energy Storage blocks using Superconductor Cables. This massive buffer prevents brownouts during the massive energy spike of a high-speed particle acceleration cycle.

  5. 5Draft the Particle Accelerator Ring Geometry

    Lay out a large octagonal or circular track using Accelerator Ring blocks with a minimum straight-line gap of 15 to 25 blocks per side. Ensure the turns are gentle (angled at 45 degrees rather than sharp 90-degree corners), because tight corners limit maximum particle velocity and cause premature ring collisions. Leave an intersection point where two opposing paths or a dual-controller loop can collide items head-on.

  6. 6Install Controllers, Motors, and Sensors

    Place two Accelerator Controllers facing opposite directions along the ring structure so their fired particles will eventually intersect inside a shared Accelerator Ring segment. Replace straight segments of the ring with clusters of Accelerator Motors, and install Accelerator Sensors just before the collision zone. Wire all Motors and Controllers directly to the Large Energy Storage output using Superconductor Cables.

  7. 7Configure Logistics and Collision Automation

    Attach Item Pipes with extraction filters to both Accelerator Controllers to pull synthesized matter into your Output Storage Chest. Connect your Supply Chest to the inputs of the two Controllers to feed the base ingredients (such as Uranium, Enderic Compound, or custom KubeJS items) only when the Accelerator Sensor detects the previous cycle has cleared. Power up the Fuel Generators, let the Large Energy Storage fill to 100%, and insert your first collision pair to initiate synthesis.

How it works

The entire facility is built around solving the massive instantaneous power draw of the Oritech Particle Accelerator. Standard early-game Bio-Generators or Lava Generators struggle to supply the continuous megawatts required by multiple Accelerator Motors running simultaneously. By cracking Crude Oil in fluid-upgraded Centrifuges and blending it with Fluxite, the petrochemical wing produces high-grade Turbofuel. Fed into heavily upgraded Fuel Generators, this liquid fuel yields an immense, steady stream of RF that continuously recharges the Large Energy Storage bank.

When a recipe is triggered, the two Accelerator Controllers inject their respective item payloads into the ring in opposing directions. As each particle travels through the hollow Accelerator Ring blocks, every powered Accelerator Motor it passes boosts its velocity (measured in m/s) while draining power from the Superconductor Cable grid. Because high-tier Oritech and custom KubeJS recipes require thresholds ranging from hundreds to thousands of Joules, the wide ring radius allows the particles to make multiple passes through the motor banks without flying off the track at the corners.

Once the combined kinetic energy of the two opposing particles exceeds the Joule threshold shown in JEI, they slam into each other within the shared intersection segment. The kinetic energy is converted into matter, consuming the two input items and depositing the synthesized endgame material (such as Plutonium Dust, Prometheum, or Overcharged Crystal) directly into the controller's output buffer for pipe extraction.

Upgrades and scaling

  • Expand the perimeter of the Accelerator Ring to increase the turning radius, allowing particles to reach even higher velocities for extreme KubeJS recipes exceeding 10,000 Joules.
  • Add more Accelerator Motors along the straightaways of the ring to drastically reduce the time it takes for particles to reach collision velocity.
  • Upgrade the Machine Cores inside the Fuel Generators and Centrifuges to the absolute highest tier available, and pack every open slot with Speed and Efficiency Addons.
  • Integrate an Oritech Laser Arm array pointed at the petrochemical machines to further overclock their refining processing speed during peak collision runs.

Common mistakes

  • Building sharp 90-degree corners in the Accelerator Ring at high speeds: particles moving too fast for a tight turn radius will crash into the ring wall and be destroyed before colliding.
  • Using standard Energy Pipes instead of Superconductor Cables to feed the Accelerator Motors, which bottlenecks RF transfer and causes the motors to stall mid-acceleration.
  • Forgetting to install a Fluid Addon on the Centrifuge via a Machine Extender before trying to pump Crude Oil into it.
  • Inserting a stack of items into the Accelerator Controller at once without redstone control, causing premature low-speed collisions before the particles can build up enough Joules.

FAQ

Why are my particles crashing into the ring instead of colliding with each other?

Your ring's corners are too sharp for the speed the particle has reached. Widen the diagonal turns of the Accelerator Ring or reduce the number of Accelerator Motors right before a corner.

How do I know how fast the particles need to go for a specific item?

Check the Particle Accelerator tab in JEI for your target recipe. It displays the exact collision energy required in Joules (J); larger rings and more Accelerator Motors allow particles to reach higher Joule thresholds.

Why aren't my Centrifuges accepting Crude Oil from the Fluid Pipes?

Oritech machines require a Fluid Addon attached directly to the machine or to a connected Machine Extender before their internal fluid tanks become accessible to pipes.

More Oritech designs