Storage Drawers · End game
Endgame Netherite-Upgraded Deep Storage & Fluid Vault
This Endgame Netherite-Upgraded Deep Storage & Fluid Vault provides a centralized, lag-free bulk storage infrastructure capable of holding millions of resources inside a single chunk. By combining maximum-tier Emerald and Netherite storage upgrades with a network of Controller Slaves and Compaction Drawers, it seamlessly interfaces with your automation lines to handle massive endgame crafting demands without overflowing. Redstone upgrades and Void modules ensure continuous operation and provide automated shutoff signals to your resource quarries when reserves reach maximum capacity.
- Footprint
- 16x16x8 blocks (1 Chunk aligned)
- Power
- 0 FE/t (Passive Redstone & Mechanical Logistics)
- Throughput
- Instantaneous via Drawer Controller (limited only by external pipe extraction speed)
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Drawer Controller | 1 |
| Controller Slave | 8 |
| Compacting Drawers | 64 |
| Oak Drawers 1x1 | 128 |
| Oak Drawers 2x2 | 128 |
| Oak Trim | 64 |
| Framing Table | 1 |
| Upgrade Template | 1600 |
| Emerald Storage Upgrade (or Netherite if addon present) | 1280 |
| Void Upgrade | 320 |
| Redstone Upgrade | 32 |
| Illumination Upgrade | 320 |
| Drawer Key | 1 |
| Quantify Key | 1 |
| Concealment Key | 1 |
| Redstone Comparator | 16 |
Build it step by step
1Chunk Alignment and Foundation
Press F3+G to view chunk boundaries and mark out a 16x16 area for your vault. Building the entire drawer network inside a single chunk prevents partial-loading bugs where the Drawer Controller loses connection to distant drawers in unloaded chunks. Lay down a floor of high-blast-resistance blocks and leave a 2-block maintenance trench underneath for wiring and logistics pipes.
2Core Controller Placement
Place your primary Drawer Controller in the exact center of the room's back wall at eye level. Because the Drawer Controller only scans a contiguous network within a 12-block radius (check JEI or your modpack config for exact range), centering it ensures maximum coverage across the entire 16x16x8 room. Surround the rear and underside of the Controller with four Controller Slaves to provide extra faces for high-speed item extraction.
3Constructing the Trim Backbone
Run lines of Oak Trim (or Framed Trim customized at the Framing Table) along the floor trench from the Drawer Controller out to the four walls and central pillars. Trim blocks carry the controller's network connection without adding unnecessary inventory slots, which helps maintain optimal server tick performance. Ensure every aisle pillar has a direct, unbroken physical connection to the Trim backbone.
4Installing the Compacting Drawer Array
Dedicate the two front-most pillars entirely to Compacting Drawers, stacking them 6 blocks high. These will automatically convert between blocks, ingots, and nuggets (such as Iron, Gold, Diamond, Emerald, and Netherite) without requiring crafting power or external crafters. Connect the bases of these pillars directly to the Trim backbone.
5Assembling the Deep Storage Walls
Line the left and right perimeter walls with 1x1 Drawers for ultra-high-volume staples like Cobblestone, Netherrack, Dirt, Sand, and Glass. Place 2x2 Drawers along the inner aisles for secondary mob drops, dyes, and agricultural products. Leave a 1-block gap behind the walls for redstone wiring and Controller Slaves embedded mid-wall.
6Locking and Formatting the Vault
Craft your Drawer Key, Quantify Key, and Concealment Key. Hold the Drawer Key in your off-hand and right-click the Drawer Controller to simultaneously lock every connected drawer in the vault, ensuring slots stay reserved even when empty. Repeat the process with the Quantify Key to display exact numerical item counts on the drawer fronts, and apply the Concealment Key (Shroud Key) to hide item rendering if you experience framerate drops.
7Inserting Endgame Storage and Void Upgrades
Into every critical 1x1 and Compacting Drawer, insert up to five maximum-tier Storage Upgrades (Emerald Storage Upgrades in base Storage Drawers, or Netherite Upgrades if your modpack includes an endgame tier extension; check JEI for exact stack multipliers) along with one Void Upgrade in the final slot. The Void Upgrade is vital: it destroys excess incoming items once the drawer reaches millions of items, preventing your quarries from backing up and crashing the logistics pipes.
8Configuring Redstone Level Emitters and I/O
Install Redstone Upgrades (or Min/Max Redstone Upgrades) into drawers holding volatile or bottleneck resources, and place Redstone Comparators or dust behind those specific blocks in the maintenance corridor. Connect these redstone lines to your incoming Ender Chest hoppers or farm activation relays to halt production when a drawer hits 100% capacity. Finally, attach your external digital storage system (or high-speed item conduits) directly to the Controller Slaves in the floor trench.
How it works
At the heart of this setup is the Drawer Controller's contiguous block-scanning mechanic. Rather than routing pipes to hundreds of individual inventories—which causes severe server tick lag—all item insertion and extraction happens exclusively through the Drawer Controller and its linked Controller Slaves. When items enter the Controller from your input Ender Chest, the Controller instantly checks every connected drawer within its spherical radius, prioritizes locked drawers matching the item type, and deposits the entire stack in a single tick.
The Compacting Drawers act as a passive, zero-energy compression engine. When an ingot is inserted, the drawer internally calculates the equivalent value in blocks, ingots, and nuggets simultaneously. An external crafting system hooked up to a Controller Slave can pull Iron Blocks, Iron Ingots, or Iron Nuggets on demand without ever running a single crafting operation, drastically speeding up endgame recursive crafting recipes.
Overflow protection and factory regulation are handled hardware-side at the individual drawer level. Each drawer utilizes five high-tier Storage Upgrades to boost capacity exponentially, paired with a Void Upgrade or Redstone Upgrade. For infinite trash resources like Cobblestone, the Void Upgrade simply deletes overflow at full capacity so input lines never stall. For valuable processed materials, the Redstone Upgrade emits a proportional redstone signal out the back of the drawer block, shutting off upstream machines the moment your reserve quota is met.
Upgrades and scaling
- Framing Table Customization: Use the Framing Table to skin Framed Drawers, Framed Compacting Drawers, and Framed Trim with Netherite Blocks, Quartz, or Glowing Glass to match your endgame base aesthetic.
- Digital Storage Integration: Attach an external storage bus (from mods like Applied Energistics 2 or Refined Storage, if installed) onto a Controller Slave with high priority, turning the entire vault into a massive bulk drive.
- Illumination Upgrades: Slot Illumination Upgrades into every drawer face so the item labels and counts glow in the dark without needing torches on the vault floor.
- Fluid Drawer Expansion: If your modpack includes fluid drawer integration or addons, swap one aisle of 1x1 Drawers for Fluid Drawers connected to the same Controller Slave infrastructure to store thousands of buckets of Lava, Experience, and industrial acids.
Common mistakes
- Exceeding the 12-Block Radius: Placing drawers further than 12 blocks away from the central Drawer Controller will cause them to silently fail to connect, even if bridged by Trim.
- Connecting Digital Storage to the Main Controller: Hooking external storage buses directly to the Drawer Controller instead of a Controller Slave can cause slot-scanning lag or directional face conflicts during heavy I/O.
- Forgetting to Lock Drawers Before Automation: If a drawer is not locked with a Drawer Key and gets completely emptied during a massive crafting job, random unallocated items from your quarry input will flood into the empty slot and break your sorting.
- Omitting Void Upgrades on Farm Outputs: Without a Void Upgrade, a single full drawer will reject incoming items at the Controller, causing your input Ender Chest to clog and halting all other item types waiting in the same pipe.
- Building Across Chunk Borders: Spanning the drawer network across two chunks risks corrupting the Controller cache or spilling items when one half of the room unloads while the input chunk stays chunk-loaded.
FAQ
Why use Controller Slaves instead of piping directly into the Drawer Controller?
The Drawer Controller only has six faces, and at least one is needed to touch your Trim or drawer network. Controller Slaves can be placed anywhere within the 12-block network range to expose dozens of extra connection faces for pipes, hoppers, and storage buses while acting as the exact same inventory.
How do I stop massive FPS lag when looking at hundreds of drawers?
Craft a Concealment Key (also called a Shroud Key) and right-click the Drawer Controller with it. This hides the 3D rendered item icons on every drawer face in the vault while still allowing the network to function normally, restoring your framerate immediately.
Can I move a full endgame drawer without losing millions of items?
Yes, apply Packing Tape to the drawer before breaking it. When broken, it drops as a taped block that retains all of its millions of stored items and installed upgrades inside your inventory until you place it back down.