Storage Drawers · Mid game
AE2 & Refined Storage External Drawer Controller Bridge
This setup integrates a Storage Drawers network directly into an Applied Energistics 2 or Refined Storage digital network using a single Drawer Controller. By setting the external storage connection to high priority, all bulk materials and auto-compacting ingots are automatically routed into drawers rather than clogging up expensive digital storage disks. It provides a massive, lag-friendly storage buffer during the mid-game transition to full automation.
- Footprint
- 9x5x5 blocks
- Power
- Minimal (only consumes AE2/RS passive channel power, check JEI)
- Throughput
- Instantaneous (limited only by import bus or interface transfer speed)
- Difficulty
- beginner
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Drawer Controller | 1 |
| Controller Slave | 1 |
| Compacting Drawers | 12 |
| Oak Drawers 1x1 | 24 |
| Oak Drawers 2x2 | 12 |
| Oak Trim | 10 |
| Drawer Key | 1 |
| Quantify Key | 1 |
| Concealment Key | 1 |
| Emerald Upgrade (or highest tier, check JEI) | 36 |
| Void Upgrade | 36 |
| ME Storage Bus (or RS External Storage) | 1 |
| ME Fluix Glass Cable (or RS Cable) | 8 |
Build it step by step
1Place the Drawer Controller
Choose a central location for your storage wall and place the Drawer Controller at the bottom-center. Remember that the Drawer Controller can only link to drawers within a 12-block radius in any direction. Ensure the rear of the controller is accessible for wiring.
2Assemble the Drawer Walls
Build outward and upward from the Drawer Controller using 1x1, 1x2, and 2x2 Oak Drawers. Use 1x1 drawers for massive bulk items like Cobblestone and Dirt, and 2x2 drawers for moderate resources like mob drops and farming outputs. Every drawer must physically touch another drawer or trim block to maintain connectivity.
3Integrate Compacting Drawers
Add a dedicated section of Compacting Drawers touching the main wall. These will automatically convert metals and gems between their block, ingot, and nugget forms without requiring crafting recipes. Place them near eye level for easy manual grabbing if needed.
4Bridge Gaps with Trim
If your room design includes corners, pillars, or walkways, use Oak Trim blocks to connect separate walls of drawers back to the main Drawer Controller. Trim blocks carry the controller's network signal without offering inventory slots of their own. You can also place a Controller Slave at the back to create extra piping attachment points.
5Lock and Assign Drawers
Hold your Drawer Key in your main hand and right-click the front of the Drawer Controller to lock every connected drawer at once. Once locked, insert one of each desired item into its designated drawer slot. Locking prevents the digital network from dumping random unstackable armor or tools into empty drawers.
6Install Storage and Void Upgrades
Shift-right-click your drawers with Emerald Upgrades to vastly multiply their base stack limits (check JEI for exact multiplier values in your modpack). Follow up by adding a Void Upgrade to all bulk resource drawers so excess materials from quarries are destroyed rather than backing up into your digital drives.
7Attach the Digital Storage Bus
Attach a single ME Storage Bus or Refined Storage External Storage directly to the back of the Drawer Controller. Run your ME Glass Cable or RS Cable from this bus back to your main digital network controller. Only one bus is needed to read the entire connected wall of drawers.
8Configure High Priority
Open the GUI of the ME Storage Bus or External Storage and change its Priority setting to a high positive number, such as 1000. Leave your standard ME Drives or Disk Drives at priority 0. This forces the digital system to always deposit and withdraw matching items from the drawers first.
How it works
The core strength of this design lies in how the Drawer Controller aggregates inventories. To an ME Storage Bus or RS External Storage, the Drawer Controller appears as one massive chest containing hundreds of slots. Because the drawers are locked with a Drawer Key, the controller only accepts items that already have an assigned slot in the wall, rejecting everything else.
When new items enter your digital network via an ME Interface or Importer, the system checks storage locations in order of highest to lowest priority. Because the bus on the Drawer Controller is set to priority 1000, the network attempts to push all incoming items into the drawers first. Bulk items like cobblestone, ores, and ingots are immediately absorbed by their matching drawers, while uncategorized items are rejected by the locked controller and fall back to your priority 0 digital disks.
Compacting Drawers add another layer of utility to this bridge. When you insert iron ingots into the system, the Compacting Drawer exposes simultaneously available pools of Iron Blocks, Iron Ingots, and Iron Nuggets to the digital terminal. This eliminates the need to teach your autocrafting system how to compress or decompress metals, saving crafting CPUs and patterns.
Upgrades and scaling
- Apply a Concealment Key (Shroud Key) to the Drawer Controller to hide item rendering on the front of the drawers, which drastically improves client FPS in large bases.
- Use a Quantify Key on the Drawer Controller to display exact numerical item counts on the drawer faces.
- Install Redstone Upgrades in specific drawers to emit a signal when particular resources drop below a safe threshold, triggering automated production lines.
- Expand the array up to the full 25x25x25 bounding box centered on the Drawer Controller as your mid-game resource collection grows.
Common mistakes
- Forgetting to lock the drawers with a Drawer Key before attaching the Storage Bus, which immediately fills every empty drawer with random non-stackable loot from your drives.
- Placing drawers outside the 12-block directional range of the Drawer Controller, resulting in dead drawers that do not show up in the digital terminal.
- Leaving the ME Storage Bus or External Storage at priority 0, causing new items to split randomly between your digital disks and your drawers.
- Omitting Void Upgrades on automated farm or quarry outputs, which causes overflow to spill onto your digital drives once a drawer hits full capacity.
FAQ
Why does my digital crafting terminal show three times as many ingots as I actually have?
This is normal behavior when connecting Compacting Drawers to a digital network. The bus reads the block slot, ingot slot, and nugget slot simultaneously as potential draws from the same shared pool, inflating the displayed numbers.
How do I move items already on my digital disks into the newly built drawers?
In AE2, pass your storage cells through an ME IO Port set to transfer to network. In Refined Storage, run your disks through a Disk Manipulator. With the drawer priority set higher, the items will automatically flow into their locked drawers.
Can I connect multiple Drawer Controllers together to bypass the 12-block range limit?
No, Drawer Controllers cannot link to one another. If you need a storage room larger than a 12-block radius, you must build a separate drawer cluster with its own Drawer Controller and attach a second Storage Bus.