LaserIO · Mid game

Channel-Based Multi-Step Ore Processing Line

This setup uses LaserIO to route raw ores through an entire multi-step processing line—crushing, washing, and smelting—using a single, unified wireless laser network. By utilizing colored channels and item filters inside Laser Nodes, you completely eliminate the messy pipe spaghetti usually associated with mid-game ore processing. It is compact, infinitely expandable, and handles items, fluids, and energy simultaneously through the exact same block faces.

Footprint
5x3x3 blocks
Power
0 FE/t for LaserIO itself; machine draw varies by mod (check JEI)
Throughput
Up to 64 items per tick with full Overclockers
Difficulty
intermediate

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

Raw Ores (White ChanneForge Energy (Red ChanWater (Blue Channel)Laser Network LinkRaw Ores & EnergyCrushed Ores (Orange CLaser Network LinkCrushed Ores, Water & Purified Ores & ByprodLaser Network LinkPurified Ores & EnergyIngots (Green Channel)Ingots & Stone Dust ByInput ChestINPUTLaser Node(Input/Power/Water)LOGISTICSFlux Point / EnergySourcePOWERWater Source / SinkINPUTCrusher / PulverizerMACHINELaser Node (Crusher)LOGISTICSOre WasherMACHINELaser Node (Washer)LOGISTICSPowered Furnace /SmelterMACHINELaser Node(Smelter/Output)LOGISTICSOutput ChestOUTPUT
InputMachinePowerLogisticsOutputItemFluidEnergySignal

Materials

ItemCount
Laser Node4
Laser Wrench1
Card Holder1
Item Card8
Energy Card4
Fluid Card2
Filter (Basic)2
Card Overclocker8
Node Overclocker4
Chest2

Build it step by step

  1. 1Place Machines and Storage

    Set down your Input Chest, Crusher, Ore Washer, Powered Furnace, and Output Chest in a neat row with a one-block gap or directly adjacent to one another. Ensure your machines have their auto-input and auto-output settings enabled if required by the specific tech mod you are using. Place your Infinite Water Source and main power line right next to the Input Chest.

  2. 2Install and Link Laser Nodes

    Place four Laser Nodes down so that every machine, chest, water block, and power source is touching at least one face of a Node. Hold your Laser Wrench, sneak-right-click the first Node, and then right-click the next Node in line to create a red laser connection. Repeat this until all four Nodes are linked together in a continuous chain.

  3. 3Configure Utility Inputs (Power and Water)

    Open the first Laser Node touching your utilities. Insert an Energy Card into the face touching your power source, right-click it to open its GUI, set its mode to Extract, and set the channel to Red. Insert a Fluid Card on the face touching the water source, set it to Extract, and change its channel to Blue.

  4. 4Distribute Power and Water to Machines

    Place an Energy Card into the Laser Node faces touching the Crusher, Washer, and Furnace. Set all three of these Energy Cards to Insert mode on the Red channel. Next, place a Fluid Card into the Node face touching the Ore Washer, set it to Insert mode, and set its channel to Blue to supply the washing water.

  5. 5Route Raw Ores to Crusher (White Channel)

    Insert an Item Card on the Node face touching the Input Chest, set it to Extract on the White channel. On the Node face touching the Crusher, insert an Item Card set to Insert on the White channel. Raw ores will now immediately jump from the chest directly into the Crusher.

  6. 6Route Crushed Ores to Washer (Orange Channel)

    In the exact same Node face touching the Crusher, add a second Item Card. Set this card to Extract mode and change its color to the Orange channel (ensure your Crusher is configured to allow output from this side). On the Node face touching the Ore Washer, insert an Item Card set to Insert on the Orange channel.

  7. 7Filter Washed Ores and Byproducts (Magenta Channel)

    Washing ores typically produces both purified ore and secondary stone dust or nuggets. On the Washer's Node face, add a second Item Card set to Extract on the Magenta channel. Place an Item Card on the Furnace Node face (Insert, Magenta) with a Basic Filter allowing only Purified Ores, and place another Item Card on the Output Chest face (Insert, Magenta) with a Basic Filter set to Deny Purified Ores to catch all the stone dust and nuggets.

  8. 8Route Finished Ingots to Output (Green Channel)

    On the Node face touching the Furnace, add a second Item Card set to Extract on the Green channel. Finally, on the Node face touching the Output Chest, add a second Item Card set to Insert on the Green channel. All smelted ingots will now flow cleanly into your final storage.

How it works

LaserIO operates heavily on a color-coded broadcast system. Every Laser Node connected by a red laser beam shares the same inventory of 16 colored channels per card type (Item, Fluid, Energy, Redstone). Because item channels, fluid channels, and energy channels are evaluated completely independently, using the Red channel for Energy does not interfere if you also decide to use the Red channel for Items later.

One of the strongest features utilized in this setup is single-face multi-card capability. Each face of a Laser Node has 9 card slots. For the Ore Washer, a single Node touches only the back face of the machine, yet it simultaneously inserts power (Energy Card), inserts water (Fluid Card), inserts crushed ore (Item Card on Orange), and extracts purified ore (Item Card on Magenta). This prevents you from having to wrap pipes around all six sides of your machines.

The Magenta channel demonstrates split-routing via filters. Because the Ore Washer outputs two distinct item types, the extracting card dumps everything onto the Magenta channel. Both the Furnace and the Output Chest listen to the Magenta channel, but by applying opposite Basic Filters (Allow vs. Deny) or adjusting the Priority number inside the card GUI, you ensure smeltables go to the furnace while byproducts bypass it directly to storage.

Upgrades and scaling

  • Install up to 4 Card Overclockers inside your Extract cards to increase stack size transfer up to 64 items at once and lower the tick operation delay down to 1 tick.
  • Install Node Overclockers into the right-side slots of the Laser Nodes themselves to allow the node to process more cards simultaneously per tick.
  • Replace Basic Filters with Tag Filters using tags like 'forge:raw_materials' or 'forge:dusts' so the system automatically handles new mod ores without needing manual item filter updates.
  • Expand into parallel processing by placing three more Crushers around the Crusher Laser Node and simply copying your card configurations using the Laser Wrench or Card Cloner.

Common mistakes

  • Forgetting to configure the internal sidedness of your tech mod machines; many modded machines require you to set a face to a dual Input/Output mode in their own GUI before LaserIO can both insert and extract from that single face.
  • Leaving the newly placed cards on their default 'Do Nothing' mode instead of left-clicking the mode button to switch them to Insert or Extract.
  • Confusing the channel colors on the Item Cards—remember that an Extract card on the White channel will only ever talk to an Insert card on the White channel.
  • Trying to insert a Filter into an Insert card when you haven't unlocked the slot; ensure you craft a Basic Filter and place it in the designated filter slot inside the Item Card's GUI, not the Overclocker slot.

FAQ

Why are my items not moving even though the channels and modes are set correctly?

Check the machine's internal side configuration. Many machines block extraction from the same face used for insertion unless you open the machine's settings and set that specific face to Combined I/O.

How far apart can I place the Laser Nodes?

By default, the Laser Wrench can link two Laser Nodes up to 8 blocks apart, and the laser beam can pass straight through solid blocks and machines without obstruction.

Do Laser Nodes require power to move items and fluids?

No, LaserIO networks operate completely free of energy costs; Energy Cards are only used to transport FE from your generators to your machines.

More LaserIO designs

LaserIO · Late gameHigh-Speed AE2 Inscriber & Charger ArrayThis setup leverages LaserIO's exact-count filtering and single-block face routing to build an ultra-compact, jam-proof Applied Energistics 2 processor and Certus Quartz array. By combining Overclocked Item Cards with Counting Filters, you can push raw materials through multiple Inscribers and Chargers from a single ME Pattern Provider without ever clogging an input slot.Advanced7 steps
LaserIO · Mid gameZero-Cable Botania Runic Altar & Livingrock SetupThis setup uses LaserIO to fully automate Botania's Runic Altar and Pure Daisy without sprawling redstone wiring or clunky physical pipes. By utilizing Counting Filters, Sensor Cards, and Redstone Cards, it precisely injects crafting ingredients, drops Livingrock only when the ritual is ready, and triggers a Autonomous Activator or Dispenser for the final wand strike. It is the ultimate mid-game magic-tech crossover for clean, zero-cable Botania rune and living block production.Intermediate7 steps
LaserIO · End gameMekanism Fission Reactor Coolant & Waste LogisticsThis endgame logistics network uses LaserIO to manage the massive fluid, chemical, and Redstone signal requirements of a Mekanism Fission Reactor. By routing high-throughput coolant, heated coolant, nuclear waste, and emergency scram signals through a single wireless laser relay, it eliminates spaghetti piping around your hazardous reactor containment zone. Building this setup ensures tick-perfect coolant delivery and fail-safe automation to prevent catastrophic meltdowns.Advanced6 steps
LaserIO · Mid gameWireless Mystical Agriculture Farm & HarvesterThis setup automates a multi-plot Mystical Agriculture farm using LaserIO to eliminate sprawling pipe networks. By bridging gaps with wireless laser beams, you can seamlessly distribute power, water, and seeds while collecting harvested essence into a central sorting system. It utilizes Round-Robin logic to keep multiple Harvesters balanced without clogging a single inventory.Intermediate6 steps
LaserIO · Early gameSingle-Block Machine Array AutomationThis setup utilizes LaserIO to route items, fluids, and energy through the exact same block face of your processing machines. By eliminating bulky cable spaghetti, you can build ultra-compact, flush-to-the-wall machine arrays even in the early game. Each Laser Node acts as a multi-purpose conduit, handling inputs and outputs simultaneously without needing access to multiple sides of your machines.Beginner7 steps