Buildcraft · Addon guide · Advanced

Logistics Pipes Addon Guide: Smart Storage and On-Demand Auto-Crafting

Transform your chaotic BuildCraft pipe spaghetti into an intelligent, self-routing inventory network using the Logistics Pipes addon. In this guide, you will build a centralized storage hub featuring polymorphic item sorting, passive machine restocking, and on-demand auto-crafting. Mastering this system eliminates manual chest hunting and bridges the gap between simple mechanical transport and full base automation.

What you need

  • BuildCraft (Core, Transport, Factory, Silicon, Energy) and the Logistics Pipes addon installed
  • A stable power source (BuildCraft Stirling/Combustion Engines or compatible RF/EU generators)
  • Logistics Power Junction
  • BuildCraft Wrench or Logistics Pipe Controller
  • Basic Logistics Pipes and standard Cobblestone/Stone/Gold Transport Pipes
  • Logistics Chassis Pipes (Mk1, Mk2, or higher)
  • ItemSink Modules, Polymorphic ItemSink Modules, and Provider Modules
  • Supplier Logistics Pipes and Crafting Logistics Pipes
  • Logistics Crafting Tables (or BuildCraft Auto Workbenches)
  • Request Logistics Pipe (or Logistics Request Table)
  • Several Chests or modded storage containers

Step by step

  1. 1Power the Network via the Logistics Power Junction

    Place your Logistics Power Junction down and connect it to your primary energy generation system using kinesis pipes or compatible power cables. Attach a single Basic Logistics Pipe directly to one face of the Junction. Check the Junction's GUI to confirm its internal energy buffer is filling; notice that the connected Basic Logistics Pipe changes its central texture from red to green, indicating the network is energized and online.

    Tip: Only one Logistics Power Junction is needed per contiguous pipe network, as power travels invisibly through all connected transport and logistics pipes.

  2. 2Lay the Routing Backbone with Basic Logistics Pipes

    Extend your network from the Power Junction to your storage and machine areas using standard BuildCraft Transport Pipes (Gold Transport Pipes are ideal for high speed). At EVERY intersection, turn, or chest connection, you must place a Basic Logistics Pipe. Standard BuildCraft pipes cannot read routing packets and will bounce items randomly at intersections, whereas Basic Logistics Pipes read the item's destination data and steer it along the shortest valid path.

    Tip: Hold a BuildCraft Wrench in your hand to visually inspect the routing connections and verify that no intersections are left unmanaged.

  3. 3Establish the Default Route (Overflow Catch-All)

    Place a large chest at the end of your main storage line to act as an overflow buffer and attach a Basic Logistics Pipe (or a Logistics Chassis Mk1 with an ItemSink Module) to it. Right-click the pipe with a BuildCraft Wrench to open its configuration GUI. Click the 'Default Route' toggle in the bottom corner so it reads 'Yes'. Any item entering the network that does not have a specific home will now safely path to this chest instead of popping out onto the floor.

    Tip: Never skip setting a Default Route; it is your primary safety net against dropped item lag during big mining runs.

  4. 4Configure Smart Storage with Chassis and Polymorphic Modules

    Attach Logistics Chassis Mk2 pipes onto your primary storage chests. Right-click a Chassis pipe with an empty hand to open its module slots, and insert a Polymorphic ItemSink Module and a Provider Module. The Polymorphic ItemSink automatically checks what items already exist inside the attached chest and tells the network to send matching incoming items there. The Provider Module broadcasts the chest's contents to the network so you can extract them later.

    Tip: Pre-fill each chest with at least one copy of the items you want stored there so the Polymorphic ItemSink knows what to attract.

  5. 5Set Up Central Ordering with a Request Pipe

    Branch off your main line to a convenient central location and place a Request Logistics Pipe (or a Logistics Request Table for a persistent crafting grid). Right-click the Request Pipe with your Wrench to open the network browser. You will now see every item sitting in chests equipped with Provider Modules; simply select an item, choose the quantity, and click 'Request' to watch it physically travel through the pipes and pop out into your inventory.

    Tip: Place a normal chest directly adjacent to a Request Logistics Pipe if you prefer requested items to be deposited into an inventory rather than dropped at your feet.

  6. 6Automate Machine Inputs with Supplier Pipes

    To keep a machine like a Furnace or Combustion Engine permanently stocked, attach a Supplier Logistics Pipe directly to its appropriate input face. Open the Supplier Pipe's GUI with your Wrench and place phantom copies of the required item (e.g., Coal in the bottom face of a Furnace) in the grid. Whenever the machine's internal inventory drops below the specified amount, the Supplier Pipe will automatically pull replacements from your Provider chests.

    Tip: Change the Supplier mode in the GUI from 'Partial' to 'Full' if you want the pipe to wait until a complete stack is available before requesting a delivery.

  7. 7Build On-Demand Auto-Crafting Stations

    Place a Logistics Crafting Table and open its GUI to arrange a single crafting recipe using real items in the left grid (this creates a phantom template without consuming the items). Attach a Crafting Logistics Pipe directly to the table. Open the Crafting Pipe's GUI with your Wrench and click the 'Import' button; this automatically pulls the recipe ingredients and output into the pipe's memory, registering the craftable output with the rest of your network.

    Tip: Unlike classic BuildCraft Auto Workbenches, Logistics Crafting Tables craft instantly and keep ingredients stored safely in your main chests until the exact moment they are needed.

  8. 8Chain Multi-Step Recipes and Smelting

    For complex items like BuildCraft Gears, set up separate Logistics Crafting Tables for each step (Wood Gear, Stone Gear, Iron Gear). For smelting recipes like Iron Ingots or Glass, attach a Crafting Logistics Pipe to the input of a Furnace, manually set the input (Iron Ore) and output (Iron Ingot) inside the Crafting Pipe GUI, and use a Basic Logistics Pipe with an extractor or hopper on the furnace output to return the finished product to the network.

    Tip: Attach a Logistics Chassis pipe with Crafting Modules Mk1/Mk2/Mk3 to a single table if you want to compact multiple simple recipes onto one block face depending on mod version availability.

How it works

Standard BuildCraft transport pipes are completely passive: items travel straight until they hit an intersection, where the pipe rolls a virtual dice to pick a random direction. Logistics Pipes overlays a virtual routing protocol on top of these physical pipes. Every Logistics Pipe acts as a network node that communicates with all other nodes to calculate the shortest physical distance between A and B.

The system operates entirely on a Pull/Push demand logic rather than blind extraction. Passive destinations (ItemSinks and the Default Route) advertise their priority levels to the network. When an unrouted item enters ANY Basic Logistics Pipe, that pipe queries the network for the highest-priority valid destination, wraps the item in a routing packet, and sends it along. Basic Logistics Pipes at intersections read this packet and dynamically switch track directions so the item never gets lost.

Active nodes (Request, Supplier, and Crafting pipes) broadcast pull requests across the network. When you request an Iron Gear via a Request Pipe, the pipe asks all Provider Modules if one exists. If none are found, it checks all Crafting Pipes. The Iron Gear Crafting Pipe then recursively requests Iron Ingots and a Stone Gear, which in turn requests Cobblestone and a Wood Gear. Ingredients are only pulled from Provider chests in the exact quantities needed, preventing jammed crafting grids and wasted resources.

Common mistakes

  • Using standard BuildCraft pipes at intersections: If a T-junction or crossroad is made with a Cobblestone or Gold Transport Pipe instead of a Basic Logistics Pipe, routed items will lose their pathing instructions and bounce back or take wrong turns.
  • Using Wooden Extraction Pipes instead of Provider Modules: Constantly pumping items out of storage chests with Wooden Transport Pipes floods the network and wastes energy. Always let items sit passively in chests and use Provider Pipes or Provider Modules to extract them only when requested.
  • Forgetting the Default Route: If a Crafting Pipe pulls too many ingredients or a machine outputs a byproduct that has no assigned ItemSink, the network will panick and eject the items onto the ground if no chest is designated as the Default Route.
  • Leaving chunks unloaded across the pipe network: If your Logistics Power Junction or distant Provider chests are in unloaded chunks, the network will instantly sever or forget those inventories exist. Keep your entire logistics backbone chunk-loaded.

FAQ

Why are the lights on my Basic Logistics Pipes flashing red?

Red lights mean the pipe has no connection to a powered Logistics Power Junction. Check for breaks in your pipe line, ensure you did not use cobblestone pipes next to structure pipes that break continuity, and verify your Power Junction is receiving sufficient engine power.

How do I insert newly mined items from my Ender Chest or Quarry into the storage network?

Attach a Logistics Chassis Mk1 containing a QuickSort Module to your input chest, or pump items out of the input chest using a standard Wooden Transport Pipe and Redstone Engine directly into a Basic Logistics Pipe. As soon as the items hit the Basic Logistics Pipe, they will be scanned and routed to your ItemSinks.

Why does my Request Pipe say 'Missing Items' when I can clearly see them inside my storage chest?

The network can only 'see' inside inventories that have a Provider Logistics Pipe or a Chassis Pipe with a Provider Module attached. Adding an ItemSink or Polymorphic ItemSink only allows items to go IN; it does not allow the network to pull them back OUT.

Can I speed up item travel times across large bases?

Yes. Replace the straight connecting segments between your Basic Logistics Pipes with BuildCraft Gold Transport Pipes (which naturally accelerate items), and insert Item Speed Upgrade modules into your Chassis and Crafting pipes to boost extraction velocity.

By combining a powered Logistics Power Junction, intersection routing nodes, Polymorphic ItemSinks, and Crafting Pipes, you can transform basic BuildCraft transport pipes into a smart, lag-free, on-demand automation network.

More Buildcraft guides

Buildcraft · Getting startedBuildCraft Getting Started Guide: Gears, Pipes, and Early PowerThis guide walks you through your very first steps in BuildCraft, from crafting the core mechanical gears to building an automated item extraction system. Mastering these basics is essential because every advanced machine, quarry, and fluid factory in the mod relies on this foundational transport and power logic.Beginner7 steps
Buildcraft · ExplainedBuildCraft Transport Pipes Explained: Item, Fluid, and Kinesis RoutingMastering BuildCraft transport pipes is the foundation of automating your base, allowing you to seamlessly move items, pump liquids, and distribute engine power. By understanding the unique behaviors of each pipe material, you can prevent catastrophic item spills, avoid power bottlenecks, and construct an automated early-game sorting system using Diamond Transport Pipes.Beginner7 steps
Buildcraft · PowerBuildCraft Engines & MJ Power Guide: From Stirling to CombustionMastering BuildCraft power generation allows you to automate large-scale mining, refining, and building operations using Minecraft Joules (MJ). This guide covers the progression from basic Redstone Engines to liquid-fueled Combustion Engines, explaining how to manage heat stages, set up reliable water cooling, and prevent catastrophic base explosions.Intermediate7 steps
Buildcraft · Setup guideHow to Set Up and Maximize the BuildCraft QuarryThe BuildCraft Quarry is the ultimate mid-to-late-game automated mining machine, capable of excavating massive areas down to bedrock without player intervention. In this guide, you will learn how to expand the Quarry to its maximum custom size using Land Marks, power it safely with an efficient engine array, handle underground fluids, and automatically sort the massive influx of resources.Intermediate7 steps
Buildcraft · PowerHow to Build an Oil Refinery and Fuel Power PlantMastering oil extraction and refinement is the ultimate milestone in BuildCraft, transitioning your base from slow coal-burning engines to massive industrial power generation. This guide covers how to locate and pump crude oil, process it using either the classic Refinery or the newer Distiller system, and construct a failsafe, water-cooled Combustion Engine power plant.Intermediate7 steps
Buildcraft · ProgressionBuildCraft Silicon Guide: Lasers, Assembly Table, and ChipsetsMastering the BuildCraft Silicon module unlocks the ability to craft Redstone Chipsets, Pipe Wires, and advanced Logic Gates. By setting up a high-powered Laser array around an Assembly Table and an Integration Table, you can transition from manual engine maintenance to fully automated pipe networks. This guide walks you through building an efficient laser processing setup for mid-to-late game automation.Intermediate7 steps