Buildcraft · Setup guide · Intermediate

How to Set Up and Maximize the BuildCraft Quarry

The BuildCraft Quarry is the ultimate mid-to-late-game automated mining machine, capable of excavating massive areas down to bedrock without player intervention. In this guide, you will learn how to expand the Quarry to its maximum custom size using Land Marks, power it safely with an efficient engine array, handle underground fluids, and automatically sort the massive influx of resources.

What you need

  • 1 Quarry (requires a Diamond Pickaxe and various gears; check JEI for your version's exact recipe)
  • 3 Land Marks and 1 Redstone Torch (optional, for maximizing the mining area)
  • Multiple Stirling Engines or Combustion Engines
  • Kinesis Pipes (Wooden, Stone or Cobblestone, and Gold)
  • Transport Pipes (Cobblestone, Stone, Gold, Diamond, and Void Transport Pipes)
  • Water source, Pump, and Fluid Pipes (if using Combustion Engines)
  • Multiple Chests or high-capacity storage blocks
  • 1 BuildCraft Wrench

Step by step

  1. 1Define Custom Boundaries with Land Marks

    By default, a Quarry mines a modest 9x9 area, but you can expand this up to 64x64 blocks. Place your first Land Mark on the ground to act as your origin corner. Place a second Land Mark up to 64 blocks away along the X-axis, and a third Land Mark up to 64 blocks away from the origin along the Z-axis to form an 'L' shape. Right-click the origin Land Mark to connect them into a red laser boundary box.

    Tip: Place a Redstone Torch next to a Land Mark before connecting them to project helper lasers that show the maximum alignment limits.

  2. 2Place the Quarry

    Walk up to any of the three connected Land Marks and place the Quarry block directly adjacent to it on the outside of the marked box. The red lasers will turn into yellow-and-black striped boundary lines, and the Land Marks will pop off the ground as collectible items. Retrieve your Land Marks for future use.

    Tip: Never place the Quarry inside the red laser box, or it will fail to bind to the custom area.

  3. 3Set Up the Output Pipe Network

    The Quarry does not need a Wooden Transport Pipe to extract items; it automatically ejects mined blocks out of any attached pipe or directly into an adjacent inventory. Attach a Cobblestone or Stone Transport Pipe to the top of the Quarry and route it toward your storage area. Do not place a single chest next to the Quarry, as a 64x64 excavation will overflow it in minutes.

    Tip: Use Gold Transport Pipes every few blocks along long pipeline stretches to keep items moving at maximum speed.

  4. 4Build the Auto-Sorting and Voiding System

    Before connecting to your chests, insert a Diamond Transport Pipe into your item pipeline. Right-click the Diamond Transport Pipe to open its colour-coded filtering GUI, corresponding to the coloured sides of the pipe. Place Cobblestone, Dirt, and Gravel into the filter slot matching a side connected to a Void Transport Pipe to automatically destroy junk blocks. Route valuable ores and gems through a different coloured side leading directly into your storage chests.

    Tip: Keep a small chest branch for a few stacks of Cobblestone before the Void Pipe in case you need building materials later.

  5. 5Construct the Power Array

    A Quarry converts energy directly into mining speed and frame construction. Set up an array of Stirling Engines (burning Coal or Charcoal) or Combustion Engines (burning refined Fuel or Oil) a short distance from the Quarry. Attach Wooden Kinesis Pipes directly to the engines to extract the power, then connect those into a main line of Gold Kinesis Pipes leading into any available face of the Quarry.

    Tip: Check your in-game guide or JEI for exact power capacities of Kinesis Pipes in your version, as overloading lower-tier pipes can cause energy bottlenecks or pipe explosions.

  6. 6Cool Your Engines and Start Mining

    If you are using Combustion Engines, you must supply them with continuous water via a BuildCraft Pump and Fluid Pipes, or they will overheat and explode violently. Once fuel and coolant are verified, place Redstone Torches or Levers next to your engines and flick them on. The engines will begin pumping energy into the Quarry, which will first deploy builder bots to construct its orange frame before lowering the drill head.

    Tip: Use a BuildCraft Wrench to right-click and rotate any Engine that is accidentally pointing into another Engine instead of its Wooden Kinesis Pipe.

  7. 7Neutralize Lava Hazards with Water

    As the drill descends, it will inevitably hit underground water and lava springs. While the drill mines straight through water, lava completely blocks the drill arm from mining any blocks underneath it. Once the Quarry has dug a few layers down, dump a single bucket of water inside the top corner of the quarry pit. The flowing water will cascade down across the pit, instantly converting any exposed lava source blocks into Obsidian, which the Quarry can easily mine.

    Tip: Remove the water source once the Quarry reaches bedrock so you can safely walk down to collect any stray experience orbs or inspect the pit.

How it works

The Quarry operates in two distinct mechanical phases: Frame Construction and Excavation. During the first phase, internal energy is spent clearing blocks that obstruct the yellow-and-black boundary lines and building the physical orange frame. Once the frame is complete, the robotic gantry and drill arm spawn. In the second phase, power is consumed continuously to move the gantry horizontally along the X and Z axes while lowering the drill down the Y axis.

Mined blocks are not pulled up physically by the drill; instead, they are instantly teleported into the Quarry's internal buffer the moment the drill breaks them. The Quarry then attempts to push these items out of any valid side containing an inventory or a Transport Pipe. If no valid output exists, the Quarry will literally spit the items into the open air, causing massive entity lag.

BuildCraft power (historically Minecraft Joules or MJ) scales the Quarry's speed dynamically. Rather than requiring a fixed voltage to turn on, the Quarry will operate slowly on even a tiny trickle of energy from a couple of Stirling Engines, and will accelerate its gantry movement and block-breaking speed linearly as you supply higher energy throughput from Combustion Engines.

Common mistakes

  • Forgetting to use Void Transport Pipes: A max-size 64x64 Quarry mines tens of thousands of Cobblestone and Dirt blocks. Without a Diamond Pipe filtering junk into a Void Pipe, your chests will overflow, and thousands of dropped item entities will crash or severely lag your game.
  • Running Combustion Engines dry: Combustion Engines generate massive power for Quarries, but if their water supply cuts out for even a brief period while running hot, they will detonate and destroy your entire power grid.
  • Leaving lava unchecked: If you do not flood the quarry pit with a layer of water, a single underground lava lake will shelter all the Diamond and Redstone ores beneath it, leaving giant unmined pillars in your pit.
  • Mining across unloaded chunks: A 64x64 Quarry spans multiple chunks. If you walk too far away and part of the Quarry unloads while the rest stays loaded, the frame and drill mechanics can glitch or stall. Always chunk-load the entire boundary.

FAQ

Can Redstone Engines power a Quarry?

No. Redstone Engines only produce a microscopic trickle of mechanical power designed for wooden extraction pipes and pumps. Even in older versions where it was theoretically possible, it is far too slow; you must use at least Stirling or Combustion Engines.

What happens when the Quarry hits Bedrock?

The drill will scan across the uneven Bedrock layers, mining every valid ore and stone block nestled between the Bedrock crevices. Once no mineable blocks remain in the entire area, the drill retracts and the Quarry enters an idle state.

How do I stop items from flying out of my Transport Pipes?

BuildCraft Transport Pipes do not have internal inventory buffers; if a chest is full, the pipe simply drops the item on the ground. You can prevent this by ensuring your storage is large enough, using Void Transport Pipes for overflow, or setting up BuildCraft Gates to turn off the engines when inventories are full.

Can I pick up and move the orange Quarry frame?

You do not need to pick up the orange frame blocks; they drop nothing if broken by hand. Simply break the main Quarry controller block with a pickaxe, and the entire orange frame will automatically decay and vanish over a short period.

By combining Land Marks for maximum coverage, a well-cooled Combustion Engine array for top speed, and a Diamond-to-Void Pipe sorting line, your BuildCraft Quarry will effortlessly strip-mine entire chunks down to bedrock while keeping only the resources you actually need.

More Buildcraft guides

Buildcraft · Getting startedBuildCraft Getting Started Guide: Gears, Pipes, and Early PowerThis guide walks you through your very first steps in BuildCraft, from crafting the core mechanical gears to building an automated item extraction system. Mastering these basics is essential because every advanced machine, quarry, and fluid factory in the mod relies on this foundational transport and power logic.Beginner7 steps
Buildcraft · ExplainedBuildCraft Transport Pipes Explained: Item, Fluid, and Kinesis RoutingMastering BuildCraft transport pipes is the foundation of automating your base, allowing you to seamlessly move items, pump liquids, and distribute engine power. By understanding the unique behaviors of each pipe material, you can prevent catastrophic item spills, avoid power bottlenecks, and construct an automated early-game sorting system using Diamond Transport Pipes.Beginner7 steps
Buildcraft · PowerBuildCraft Engines & MJ Power Guide: From Stirling to CombustionMastering BuildCraft power generation allows you to automate large-scale mining, refining, and building operations using Minecraft Joules (MJ). This guide covers the progression from basic Redstone Engines to liquid-fueled Combustion Engines, explaining how to manage heat stages, set up reliable water cooling, and prevent catastrophic base explosions.Intermediate7 steps
Buildcraft · PowerHow to Build an Oil Refinery and Fuel Power PlantMastering oil extraction and refinement is the ultimate milestone in BuildCraft, transitioning your base from slow coal-burning engines to massive industrial power generation. This guide covers how to locate and pump crude oil, process it using either the classic Refinery or the newer Distiller system, and construct a failsafe, water-cooled Combustion Engine power plant.Intermediate7 steps
Buildcraft · ProgressionBuildCraft Silicon Guide: Lasers, Assembly Table, and ChipsetsMastering the BuildCraft Silicon module unlocks the ability to craft Redstone Chipsets, Pipe Wires, and advanced Logic Gates. By setting up a high-powered Laser array around an Assembly Table and an Integration Table, you can transition from manual engine maintenance to fully automated pipe networks. This guide walks you through building an efficient laser processing setup for mid-to-late game automation.Intermediate7 steps
Buildcraft · AutomationBuildCraft Logic Gates & Pipe Wires Explained: Smart AutomationMaster BuildCraft's Silicon module by integrating Logic Gates and colored Pipe Wires directly onto your transport network. This advanced guide will teach you how to build self-regulating factories that automatically prevent item spills, stop engines from overheating, and manage fluid routing without massive vanilla redstone circuits.Advanced7 steps