Buildcraft · Progression · Intermediate
BuildCraft Silicon Guide: Lasers, Assembly Table, and Chipsets
Mastering the BuildCraft Silicon module unlocks the ability to craft Redstone Chipsets, Pipe Wires, and advanced Logic Gates. By setting up a high-powered Laser array around an Assembly Table and an Integration Table, you can transition from manual engine maintenance to fully automated pipe networks. This guide walks you through building an efficient laser processing setup for mid-to-late game automation.
What you need
- Assembly Table (1 Obsidian, 4 Redstone, 2 Diamonds, 1 Diamond Gear)
- Integration Table (used for upgrading and modifying gates)
- At least 4 to 8 Lasers (require Obsidian, Redstone, and Diamonds)
- A robust power generation setup (Stirling Engines or Combustion Engines running on Fuel)
- Kinesis Pipes (Wooden, Cobblestone/Stone, Gold, or Diamond depending on your power output)
- Raw materials for crafting: Redstone, Iron Ingots, Gold Ingots, Diamonds, Lapis Lazuli, and various Dyes
- A Chest or Hopper for collecting finished items
Step by step
1Place the Assembly and Integration Tables
Clear a spacious room, at least 9x9 blocks wide and 5 blocks high, to give yourself room for wiring and laser mounts. Place your Assembly Table and Integration Table near the center of the floor, leaving a gap of one or two blocks between them. Leave at least one side of each table accessible so you can attach an output chest or extraction pipe later.
Tip: You can place both tables adjacent to each other so they share the exact same Laser array, as Lasers will automatically switch targets based on which table currently has an active job.
2Mount the Laser Array
Place your Lasers around the tables. A Laser can target a table anywhere within an 11x11x11 cube centered on the table (up to 4 blocks away in any cardinal direction, including diagonally and vertically). When placed correctly, the emitter face of the Laser will automatically orient itself toward the table.
Tip: Mounting your Lasers on the ceiling pointing downward keeps the floor completely clear for item pipes and player movement.
3Connect the Power Grid
Lasers do not accept energy directly from standard Redstone torches; they require mechanical energy (Minecraft Joules or RF, depending on your version) supplied by BuildCraft engines. Run Kinesis Pipes from your Stirling or Combustion Engines to the flat back end of every Laser in your array. Make sure your Kinesis Pipe tier can handle the combined output of your engines without bottlenecking.
Tip: A single Laser draws a significant amount of power at full capacity, so ensure you have several Combustion Engines running on refined Fuel if you plan to run 8 or more Lasers simultaneously.
4Set Up Output Collection
The Assembly Table and Integration Table do not have internal output slots to hold finished items indefinitely. Instead, they automatically eject completed crafts into any valid adjacent inventory. Place a standard Chest directly touching the side or bottom of both tables to catch your chipsets and gates as soon as they finish.
Tip: If you place a Wooden Transport Pipe instead of a chest, the table will push items directly into the pipe without needing a Redstone Engine to extract them.
5Craft Redstone Chipsets
Right-click the Assembly Table to open its interface. Load raw Redstone along with secondary materials like Iron, Gold, or Diamond into the left inventory grid. On the right side, available recipes will illuminate; click on the Redstone Chipset, Iron Chipset, and Golden Chipset recipes to highlight them. You can select multiple recipes at once, and the table will cycle through them as long as materials remain.
Tip: Always keep a stack of plain Redstone in the table, as the basic Redstone Chipset requires nothing but a single piece of Redstone dust and laser energy.
6Produce Pipe Wires and Basic Gates
To make Pipe Wire, insert Redstone, Iron, Cobblestone, and specific Dyes (Red, Blue, Green, or Yellow) into the Assembly Table and select the corresponding wire recipe. Once you have a stockpile of Chipsets, place them back into the Assembly Table's input inventory to unlock Logic Gate recipes. Select a basic Gate (or Iron/Gold AND/OR Gate) to start assembling your first pipe controller.
Tip: Check your in-game recipe viewer (such as JEI or NEI) for exact chipset combinations, as gate recipes vary slightly between BuildCraft 7.1 and 7.99+.
7Upgrade Gates at the Integration Table
Take your newly crafted basic Gates over to the Integration Table. Place the base Gate in the center slot and surround it with expansion materials like Redstone Compasses, Pulsating Chipsets, or Quartz Chipsets depending on what functionality you want to add. As long as no jobs are queued in the Assembly Table, your Lasers will automatically pivot and fire at the Integration Table to fuse the upgrade.
Tip: Adding a Redstone Flux or Engine Control expansion to a gate allows it to directly read energy levels in Kinesis Pipes and turn engines off when machines are full.
How it works
Unlike a standard Crafting Table that produces items instantly, the Assembly Table and Integration Table operate on a cumulative energy requirement. Every recipe demands a specific pool of energy (measured in MJ or RF). The table itself cannot accept power cables; instead, it relies entirely on line-of-sight energy transfer from surrounding Lasers.
When a valid recipe is selected and materials are present in the table's internal buffer, surrounding Lasers detect the active work order and begin firing beams at the table. The color of the laser beam indicates its current power efficiency: a dark red beam means the Laser is starved for power, yellow or green indicates moderate power flow, and a bright blue beam signifies the Laser is operating at maximum capacity.
The speed of your crafting scales linearly with the number of active Lasers. Because a single Laser has a hard cap on how much energy it can transmit per tick, feeding one Laser with twenty engines will not make it craft any faster once its beam turns blue. To reduce crafting times for expensive Diamond Chipsets or Autarchic Gates, you must expand the physical number of Lasers in your array alongside your engine count.
Common mistakes
- Connecting Kinesis Pipes directly to the Assembly Table instead of the Lasers. The tables have no internal power receptors; power must always be routed into the back of the Lasers.
- Using Redstone Engines to power the Laser array. Redstone Engines produce tiny trickles of mechanical energy strictly meant for wooden extraction pipes and cannot meaningfully power a Laser.
- Forgetting to select a recipe in the Assembly Table GUI. Simply placing Redstone and Iron inside the table will not trigger the Lasers; you must manually click the desired output icon on the right panel to lock in the task.
- Failing to place an adjacent Chest or pipe on the tables. If the table finishes a craft with no adjacent inventory or pipe, it may drop the expensive chipset onto the floor where it can despawn, or halt production entirely.
FAQ
Do physical blocks block the Laser beams from reaching the table?
No, Laser beams in BuildCraft are purely visual and logical; they will pass right through solid blocks, pipes, and other Lasers as long as the table is within the 11x11x11 valid range.
Why are my Lasers firing when nothing is being crafted?
Lasers only fire when a table requests energy. If they are still firing, check both your Assembly Table and Integration Table to ensure a queued recipe isn't stuck partway through due to missing ingredients or a full output chest.
What is the difference between an AND Gate and an OR Gate?
If two conditions are configured to trigger the exact same action (like emitting a redstone signal), an OR Gate triggers the action if either condition is met, while an AND Gate requires both conditions to be true simultaneously before acting.
How do I make an Autarchic Gate to replace my Redstone Engines?
First craft a Pulsating Chipset (using Redstone and Ender Pearls) in the Assembly Table, then combine that Pulsating Chipset with an existing Gate inside the Integration Table.
By building a well-powered Laser array around an Assembly and Integration Table, you unlock the chipsets, pipe wires, and logic gates required to build self-regulating, intelligent BuildCraft factories.