Buildcraft · Setup guide · Intermediate
Automated Construction Guide: Using the Filler, Builder, and Architect Table
Manually terraforming large areas or reconstructing identical buildings across your base takes hours of tedious block placement. By mastering BuildCraft's Builders module, you will learn how to instantly flatten terrain with the Filler, digitize your favorite structures with the Architect Table, and automatically print them anywhere using the Builder.
What you need
- 1x Filler
- 1x Architect Table
- 1x Builder
- 4x Land Marks
- 4x Redstone Torches or Levers (optional, depending on version)
- Blank Blueprints or Templates
- BuildCraft Engines (Stirling Engine or Combustion Engine recommended; Wooden Engines are too weak)
- Kinesis Pipes (if placing engines away from the machines)
- Building blocks (Cobblestone, Dirt, or specific materials matching your structure)
Step by step
1Define a 3D Zone with Land Marks
Place your first Land Mark at one corner of the area you want to modify or scan. Place two more Land Marks along the X and Z axes to define the footprint, and a fourth vertically on the Y axis to define the height, ensuring all markers line up directly along the same axes. Right-click the origin Land Mark (in older versions, apply a Redstone signal using a Redstone Torch first) to project red laser beams that connect into a 3D bounding box.
Tip: If a blue laser beam appears when you activate a Land Mark, it shows the maximum range and alignment axes to help you place the remaining markers accurately.
2Position and Configure the Filler
Place the Filler directly adjacent to any of the activated Land Marks. Upon placement, the red laser box will turn into a black-and-yellow striped construction frame, and the Land Marks will pop off the ground for you to collect. Open the Filler's GUI to select your desired operational mode, such as Clear, Flatten, Box, or Fill.
Tip: In older versions of BuildCraft, you select the mode by arranging Bricks and Glass in a specific 3x3 pattern inside the Filler's GUI—check JEI or the in-game guide book if your interface shows a crafting grid instead of mode buttons.
3Supply Materials and Power to the Filler
If you chose a building mode like Box, Horizon, or Fill, load the Filler's internal inventory with the blocks you want to place. Attach one or more Stirling Engines or Combustion Engines directly to the Filler (or connect them via Kinesis Pipes), load them with fuel, and apply a Redstone signal to start them. The Filler will rapidly consume power to break existing blocks or place new ones until the defined zone is complete.
Tip: Blocks destroyed by the Filler's Clear mode are permanently deleted or dropped as loose items depending on your mod version, so remove valuable chests and machines beforehand.
4Frame an Existing Structure for Scanning
To copy a building you have already constructed, set up a new 3D bounding box using four Land Marks that completely encloses the entire structure. Make sure the red laser box includes the roof, walls, and floor if you want them copied. Place an Architect Table directly adjacent to one of the active Land Marks to lock the scanning frame onto the building.
5Record the Structure onto a Blueprint
Open the Architect Table GUI and type a recognizable name for your structure into the text field. Insert a blank Blueprint or Template into the left input slot. The table will instantly read the blocks inside the boundary frame and output a written Blueprint or Template in the right slot.
Tip: Use a Blueprint when you need an exact replica with specific block types and orientations, or use a Template if you only want to copy the physical shape and build it out of a single material like Cobblestone.
6Deploy the Builder and Load the Plan
Go to the new location where you want the replica built and place the Builder on the ground. Keep in mind that the structure will generate relative to the Builder's facing direction, mimicking where the Architect Table stood during the scan. Open the Builder GUI and place your written Blueprint into the designated plan slot to project a boundary frame showing where the new building will appear.
Tip: Verify the preview frame carefully before powering the machine; if it faces the wrong way, break the Builder with a pickaxe and place it from a different angle.
7Feed Materials and Power the Builder
When a Blueprint is loaded, the Builder GUI displays a required materials list on the side. Load the Builder's inventory slots with the exact blocks requested (or pump them in using Transport Pipes from adjacent chests). Connect your Stirling or Combustion Engines, turn them on, and watch as the Builder shoots construction lasers to assemble your building block by block.
Tip: Place a large Chest directly next to the Builder or pipe items in continuously for massive builds that require more blocks than the Builder's internal inventory can hold.
How it works
BuildCraft's automated construction relies on a spatial coordinate system established by Land Marks. When you align Land Marks along the orthogonal X, Y, and Z axes, they calculate a 3D bounding matrix. Placing a Filler or Architect Table adjacent to a marker transfers those spatial coordinates into the machine's memory and converts the visual red lasers into a persistent striped work zone.
The Architect Table acts as a data serializer. It iterates through every coordinate inside the 3D matrix and records either a binary state (block present vs. air) for Templates, or full block ID and metadata (such as stair direction, glass color, and wood variant) for Blueprints.
When the Builder or Filler receives Minecraft Joules (MJ) from BuildCraft engines, it converts energy into work ticks. Every operation—whether vaporizing a Dirt block or placing a Stone Brick—requires a specific packet of power. The machine scans its target matrix sequentially, pulls the corresponding item from its internal buffer, and places it in the world at the matching relative coordinate.
Common mistakes
- Using Redstone Engines to power construction machines: Redstone Engines only produce a tiny trickle of power designed for Wooden Transport Pipes and will either fail to run the Builder/Filler or run painfully slow. Always use Stirling or Combustion Engines.
- Misaligning Land Marks: Land Marks must be placed in exact straight lines along the X, Y, and Z grid. If a marker is off by even one block diagonally, the red laser beams will not connect.
- Confusing Blueprints with Templates: Putting a Template in the Builder when you expect a detailed house will result in a solid, monochrome shell made out of whatever random block you put into the inventory first. Always use Blueprints for multi-material builds.
- Placing the Builder inside the construction zone: Always stand outside the desired footprint when placing the Builder so the machine does not accidentally wall itself inside the structure.
FAQ
Why isn't my Builder placing blocks even though it has power and a Blueprint?
Check the required materials list inside the Builder's GUI. If it is waiting on a specific block (or a specific orientation/variant of a block) that is missing from its inventory, the construction process will pause until you supply that item.
Can the Architect Table and Builder copy inventories inside chests or complex machines from other mods?
Standard Blueprints copy basic blocks and their orientations well, but they cannot duplicate items inside chests, and certain complex tile entities from other mods may not be supported for safety and balance reasons.
How do I reuse a Blueprint multiple times without scanning the building again?
You can keep the written Blueprint and place it into a Builder as many times as you like, or store it inside an Electronic Library to make backup copies onto new blank Blueprints.
What is the maximum area a Filler or Architect Table can cover?
The maximum size is determined by the maximum range of the Land Marks ( typically up to 64x64x64 blocks in most versions). Activate a single Land Mark to view its blue guide lasers, which stretch to the exact maximum allowed distance.
By combining Land Marks with the Filler, Architect Table, and Builder, you can automate massive terrain clearing projects and stamp out complex architectural builds anywhere in your world using only raw materials and engine power.