XNet · Automation · Advanced

How to Use XNet for Clean AE2 & Refined Storage Subnets

Automating complex machines like Applied Energistics 2 Inscribers or multi-input alloy furnaces often creates a chaotic mess of power, item, and data cables. By pairing an XNet Controller with a single Crafting Interface or Crafter, you can condense all item routing, side-specific insertion, and power delivery into one clean block line. This advanced guide will walk you through building a lag-free, single-cable XNet subnet to handle your most complicated processing chains.

What you need

  • 1x XNet Controller
  • XNet Connectors and Advanced Connectors (matching colors)
  • XNet Network Cables (matching colors)
  • 1x Buffer Inventory (Vanilla Chest, Barrel, or Crate)
  • 1x AE2 ME Pattern Provider (or ME Interface in older versions) OR 1x Refined Storage Crafter
  • Target Machines (e.g., 5x AE2 Inscribers for full processor automation)
  • 1x Facade or Cable Anchor (optional, for aesthetics)
  • RF/FE Power Source to feed the XNet Controller

Step by step

  1. 1Set Up the Buffer and Crafting Block

    Place your buffer chest down first, then point your AE2 Pattern Provider or Refined Storage Crafter directly into it. Do not connect the Pattern Provider or Crafter directly to the processing machines. Instead, place an XNet Connector onto the buffer chest and another XNet Connector directly onto your main AE2 ME Interface or RS Interface (for returning finished items).

    Tip: If using an AE2 Pattern Provider in block form, it can act as both the input and return point if you buffer through a chest and route finished goods back into the Provider.

  2. 2Wire the Processing Array with Advanced Connectors

    Place your processing machines (such as five AE2 Inscribers) in a neat row. Attach an XNet Advanced Connector to the back of each machine, then link them all back to the buffer chest and the XNet Controller using Network Cables. You must use Advanced Connectors on sided machines like Inscribers because standard Connectors can only interact with the specific block face they are touching.

    Tip: Right-click each machine or Connector inside the Controller GUI and type a custom name in the top-left box (e.g., 'Gold Inscriber', 'Final Press', 'Buffer Chest') to keep your configuration grid readable.

  3. 3Establish the Power Channel

    Open the XNet Controller GUI, click on Channel 1 at the top, and set its type to 'xnet.energy' (Create). Click on the grid box corresponding to your main power cell or energy conduit and set it to 'Extract'. Next, click the boxes for the Controller itself and every processing machine on the list, setting each to 'Insert'.

    Tip: Check JEI or your in-game guide for the exact RF/t transfer limits of standard versus Advanced Connectors, as Advanced Connectors allow a higher maximum energy throughput.

  4. 4Configure Raw Ingredient Extraction

    Create a new 'xnet.item' channel in Slot 2. Click the intersection for your Buffer Chest in this channel and create a connection, setting its direction to 'Extract'. Lower the operation tick rate to its fastest setting (check the GUI tooltip, as Advanced Connectors extract faster than normal ones) and set the stack size to 'Single' or 'Stack' depending on whether your target machines jam with overflow.

    Tip: For AE2 Inscribers, set the extraction mode to 'Single' and impose a destination stock limit in the insert settings so multiple items do not jam a single input slot.

  5. 5Route Items to Virtual Machine Sides

    Still in Channel 2, click the grid slots for your processing machines and set them to 'Insert'. Because you used Advanced Connectors, look at the side-selection drop-down in the right-hand configuration panel: for an AE2 Inscriber, set the insertion face to 'Up' (Top) for raw Gold/Silicon/Diamond, and set the item filter to accept only that specific material. If a machine needs a second input (like the final processor assembly needing Redstone in the middle), create a second Insert node on a separate Item Channel and set its virtual target side to 'North/South/East/West' for the middle slot, and 'Down' for the bottom slot.

    Tip: You only need one physical Advanced Connector on the back of an Inscriber to push items into the Top, Bottom, and Side slots simultaneously across different channels.

  6. 6Loop Intermediate Products

    For multi-stage recipes (like turning Printed Silicon and Printed Logic Circuits into a finished Logic Processor), dedicate Channel 3 to internal looping. Set the first four Inscribers (Presses) to 'Extract' from their output slots. On the same channel, set the fifth 'Assembly' Inscriber to 'Insert', using the virtual side selector and item filters to place Printed Silicon in the bottom slot ('Down') and Printed Circuits in the top slot ('Up').

    Tip: Use the Priority field or Whitelist filters rigorously on shared channels so a Printed Circuit never accidentally lands in a slot meant for Redstone.

  7. 7Return Finished Goods to Main Storage

    Create a final item channel (Channel 4) dedicated to cleanup. Set your final processing machine (or all machines, if doing parallel alloys) to 'Extract' finished products. Set your AE2 Interface, Pattern Provider, or RS Interface connector to 'Insert' with no filter, returning the completed items straight into your main digital storage network to complete the crafting request.

How it works

AE2 and Refined Storage crafting blocks simply push a batch of recipe ingredients into whatever inventory they face and wait for the final product to enter the storage network. By pushing those raw ingredients into a dummy buffer chest instead of a single machine, you hand over complete logistical control to XNet. The storage system doesn't need to know that five different machines are involved; it only sees a chest accepting raw materials and an Interface receiving finished processors.

XNet handles this complexity effortlessly because its Network Cables are not even tile entities—they are simple passive block connectors that create zero tick lag. All the logic runs centrally inside the XNet Controller. Furthermore, Advanced Connectors feature a 'remote sidedness' mechanic: they allow the Controller to spoof which side of a block is being accessed. This is why a single cable attached to the back of an AE2 Inscriber can insert items into the top, bottom, and side slots while simultaneously providing power and extracting the output.

Common mistakes

  • Using standard Connectors on sided machines: Standard Connectors can only insert or extract through the physical face they are attached to. You must upgrade to Advanced Connectors to select different target faces (Up, Down, North, etc.) inside the Controller GUI.
  • Pointing the Crafter/Pattern Provider directly at the XNet Controller: The Controller does not have an internal item inventory for crafting dumps. Always push ingredients into a buffer chest or barrel with an XNet Connector attached to it.
  • Jamming AE2 Inscribers with full stacks: Many older versions of AE2 Inscribers only hold a single item per slot. If you do not set the XNet Insert settings to hold a maximum of '1' item in the destination inventory, the system can deadlock during large bulk crafts.
  • Forgetting to power the Controller itself: The XNet Controller consumes a small base amount of RF/FE plus additional power per active channel and connector. If the Controller loses power, all item routing halts immediately.
  • Mixing cable colors accidentally: XNet cables of different colors will not connect to each other. Keep your subnet on one color so your channels stay unified, or use different colors deliberately to isolate parallel networks without cables merging.

FAQ

Why not just use an AE2 Subnet instead of XNet?

An AE2 subnet for five Inscribers requires up to 20 Import/Export/Storage Buses, power cables, and careful channel management, wrapping the machines in visual clutter. XNet accomplishes the exact same task plus power delivery using just one block face per machine.

Can one XNet Controller handle more than 8 channels?

A single Controller is limited to 8 channels, which is plenty for an Inscriber setup plus several alloy machines. If you somehow run out of channels, you can add a second Controller via an XNet Router, or simply run multiple Insert/Extract tasks on a single Item Channel by using strict item filters.

How do I copy filters and settings across 5 identical machines quickly?

Inside the XNet Controller GUI, you can use the 'Copy' and 'Paste' buttons in the right-hand connector configuration panel to duplicate complex filter and side settings from one machine to the next in seconds.

Does this setup work with Blocking Mode in AE2 or Refined Storage?

Only if the machine itself connects directly to the Pattern Provider/Crafter, because a buffer chest will only report to the crafting block when the chest itself has an item in it. To prevent machine jamming without Blocking Mode, just use XNet's built-in 'Max' stock limiter on the Insert node so excess items wait safely inside the buffer chest.

By combining a simple buffer chest with XNet's virtual-side routing inside Advanced Connectors, you can automate the most complex multi-machine AE2 and Refined Storage recipes using a single, lag-free cable line.

More XNet guides

XNet · Getting startedXNet Getting Started Guide: First Controller & Cable NetworkXNet allows you to condense complex tangles of item, fluid, and energy pipes into a single, lag-free network line. In this guide, you will craft your first XNet Controller, wire up a basic cable network, and configure a channel to automatically transfer items between two chests. Mastering this fundamental setup is the key to building clean, super-efficient factory automation.Beginner7 steps
XNet · ExplainedXNet Channels, Colors, and Connectors ExplainedMastering XNet allows you to build completely lag-free, single-cable networks that move items, fluids, power, and logic simultaneously across your entire base. In this guide, you will learn the core logic behind the 8 controller channels, how to physically isolate networks using the 4 cable colors, and when to upgrade from Standard to Advanced Connectors. Understanding these fundamentals will help you replace bulky, chaotic pipe setups with clean and efficient automation.Beginner7 steps
XNet · PowerHow to Build a Lag-Free Power Grid with XNetIn this guide, you will learn how to build an ultra-efficient, centralized power distribution grid using XNet to send Forge Energy (FE) or Redstone Flux (RF) from your generators to all of your machines. Unlike traditional energy conduits that constantly calculate paths and cause server lag, XNet uses a single Controller and lightweight cables to move power instantly across huge distances. By the end, you will have a self-sustaining network that powers your entire base and keeps its own brain running smoothly.Beginner7 steps
XNet · Setup guideHow to Set Up Item and Fluid Routing in XNetIn this guide, you will learn how to build a lag-free, automated item and fluid sorting network using XNet. Mastering XNet routing allows you to organize massive storage rooms and processing lines through a single cable line, replacing messy spaghetti pipes with clean, intelligent distribution logic.Intermediate7 steps
XNet · AutomationHow to Automate Ore Processing with a Single XNet CableLearn how to automate a complete ore-doubling and smelting production line using a single row of XNet cables. Instead of running separate pipes for energy, input items, and output items, you will use one Advanced Connector per machine to handle power, ore insertion, and ingot extraction simultaneously. This approach eliminates cable spaghetti, saves space, and drastically reduces server lag.Intermediate7 steps
XNet · ExplainedXNet Logic Channels & Redstone Control ExplainedMastering XNet's Logic channels allows you to automate complex factory processes without running a single piece of external Redstone dust. In this guide, you will learn how to use internal sensors to monitor item counts, fluid levels, and RF storage, and then use colored internal signals to dynamically toggle other XNet operations on and off. This keeps your builds compact, lag-free, and capable of smart self-regulation.Advanced7 steps