RFTools · Setup guide · Intermediate

How to Set Up an RFTools Teleportation Network (Transmitters, Receivers, and Charged Porter)

Setting up an RFTools teleportation network allows you to instantly travel across infinite distances and even between different dimensions. By combining stationary Matter Transmitters and Receivers with a handheld Advanced Charged Porter, you will build a fast, reliable transit hub that connects all your bases and mining outposts.

What you need

  • RFTools (for Minecraft 1.12.2 and older) or RFTools Base + RFTools Utility (for 1.14+)
  • Matter Transmitter (at least 1 for your main hub)
  • Matter Receiver (at least 2: one for your hub, one for your destination)
  • Dialing Device (1 for your main hub)
  • Charged Porter or Advanced Charged Porter
  • Steady RF/FE power generation and energy cables at all teleport locations
  • Dimensional Shards (optional, for Machine Infuser upgrades)

Step by step

  1. 1Place and Power Your Destination Receiver

    Travel to your remote outpost or destination and place a Matter Receiver on the ground. Connect it to a reliable RF or FE power source and wait for its internal energy buffer to fill up. Make sure there are at least two blocks of empty air directly above the Receiver so you do not suffocate upon arrival.

    Tip: Your destination Receiver does not need to be chunk-loaded to accept incoming teleports; the mod will automatically load the chunk when you arrive.

  2. 2Name Your Matter Receiver

    Right-click the Matter Receiver to open its graphical interface. Type a clear, recognizable name into the text field (such as 'Nether Fortress' or 'Mining Outpost'). By default, the Receiver is public, meaning anyone can dial into it, though you can toggle it to private and add specific player names if you are on a multiplayer server.

    Tip: Always name your Receivers immediately after placing them; an unnamed Receiver is very difficult to identify in a crowded network list.

  3. 3Build the Main Teleportation Hub

    Return to your main base and place a Matter Transmitter, a Dialing Device, and a second Matter Receiver within a few blocks of each other. Connect all three machines to your base's main power grid. Name this base Receiver 'Home Base' so you have a way to return after you teleport away.

    Tip: The Dialing Device does not need to touch the Matter Transmitter directly, as long as it is placed within its local scanning radius (about 5 blocks).

  4. 4Dial and Lock a Connection

    Right-click the Dialing Device to open the network control panel. In the upper section, click to select your nearby Matter Transmitter; in the lower section, scroll through the global list of Receivers and select your remote destination. Click 'Dial' to establish a continuous, open teleportation beam, or 'Dial Once' for a single-use connection that closes after you step through.

    Tip: Use the 'Check' button in the Dialing Device to verify if the destination Receiver has enough power and clear space before you jump.

  5. 5Step Into the Teleport Beam

    Once dialed, a glowing vertical beam will appear above your Matter Transmitter. Simply walk into the beam and stand still for a fraction of a second. The Transmitter will drain a burst of energy and instantly transport you to the top of your target Matter Receiver.

    Tip: If the beam looks red or broken, stop immediately! That visual warning means the destination is obstructed or out of power.

  6. 6Link an Advanced Charged Porter

    To teleport home from the wilderness without building a Transmitter, craft a Charged Porter or an Advanced Charged Porter and charge it in an energetic charger. Walk up to your 'Home Base' Matter Receiver, hold Sneak (Shift), and right-click the Receiver block with the Porter in hand. You will receive a chat message confirming the target has been set.

    Tip: The basic Charged Porter holds only one destination, while the Advanced Charged Porter can store up to eight different Receivers and teleports you much faster.

  7. 7Switch Targets and Teleport Handheld

    If you are using the Advanced Charged Porter, Sneak and right-click in the air (away from any blocks) to open its internal radial or list GUI, where you can select which of your saved Receivers is currently active. When you are ready to go home, simply hold right-click with the Porter in your hand, wait for the brief channeling cycle, and you will be whisked away.

    Tip: Infusing your Porters, Transmitters, and Receivers with Dimensional Shards inside a Machine Infuser reduces their energy consumption and speeds up teleportation.

How it works

RFTools teleportation operates on a three-part logic: Transmitters send entities, Receivers accept entities, and the Dialing Device acts as the switchboard. A Matter Transmitter cannot pick a destination on its own. Instead, the Dialing Device scans the world save data for all registered Matter Receivers, checks your local area for available Transmitters, and writes the destination coordinates into the Transmitter's memory.

Energy consumption is dynamic and split between both ends of the trip. The Matter Transmitter pays the heavy energy cost required to initiate the jump—which scales based on the distance traveled and whether you are crossing dimensions ( check JEI or the in-game RFTools manual for exact RF/FE figures in your modpack). Meanwhile, the destination Matter Receiver must also spend a flat amount of energy from its internal buffer to materialize you safely.

The Charged Porter bypasses the need for a Matter Transmitter and Dialing Device by combining both functions into a battery-powered handheld item. Because its internal coordinates are bound directly to specific Receivers via sneaking and right-clicking, it drains its own internal RF/FE battery to send you, while still requiring the target Receiver to have power on the receiving end.

Common mistakes

  • Leaving the destination Matter Receiver unpowered: Even if your Transmitter or Charged Porter is 100% full, the teleport will fail or fatally harm you if the receiving pad runs out of power. Always give remote Receivers a dedicated solar panel, generator, or wireless power link.
  • Teleporting into an unverified beam: If a destination Receiver is destroyed or loses power while a Transmitter is permanently dialed to it, entering the beam can kill your character in space. Always look at the beam color or click 'Check' in the Dialing Device if you haven't used a route recently.
  • Placing the Dialing Device too far from the Transmitter: If the top list in your Dialing Device is completely blank, your Matter Transmitter is outside its local scanning range. Move the Dialing Device directly adjacent to the Transmitter.
  • Forgetting to set up a return Receiver before jumping: A Matter Transmitter is strictly one-way. If you dial a remote Receiver and step through without bringing a linked Charged Porter or materials to build a return Transmitter, you will be stranded at your destination.

FAQ

Can I teleport between different dimensions, like from the Overworld to the Nether or The End?

Yes, RFTools teleporters work across all dimensions natively. However, cross-dimensional jumps require significantly more RF/FE per teleport than traveling within the same dimension.

Why does my Dialing Device say 'Interrupted' or refuse to dial?

This usually means either the Matter Transmitter does not have enough power to sustain the connection, or the destination chunk was unloaded while you were trying to query its status. Ensure your Transmitter has a full energy buffer.

How do I stop other players on my server from teleporting into my base?

Open your Matter Receiver's GUI, click the access toggle button to switch it from 'Public' to 'Private', and type the exact usernames of yourself and any trusted friends into the allowed players list.

What is the difference between 'Dial' and 'Dial Once'?

'Dial' locks the beam open permanently (consuming a tiny amount of continuous idle power) so you can walk through as many times as you want. 'Dial Once' opens the beam for a single entity transport and automatically shuts down the beam the moment you arrive at your destination.

By pairing powered Matter Receivers with a central Dialing Device and an Advanced Charged Porter, you now have an instant, cross-dimensional travel network accessible from anywhere in your Minecraft world.

More RFTools guides

RFTools · Getting startedRFTools Getting Started Guide: Dimensional Shards, Machine Frames, and InfusingEvery powerful device in the RFTools mod family—from automated quarry Builders to wireless power cells and custom Dimension Builders—relies on a shared foundation of core components. In this guide, you will learn how to craft your essential configuration tool, mass-produce Machine Frames, locate rare Dimensional Shards, and use the Machine Infuser to permanently upgrade your machines so they run faster and consume less energy.Beginner6 steps
RFTools · Setup guideHow to Build an Early-Game Storage Network with RFTools StorageTired of digging through dozens of unsorted chests in your starter base? By combining RFTools Modular Storage blocks with the Storage Scanner, you can build a powerful, searchable, and craft-ready inventory network long before you can afford high-end digital storage mods. This guide walks you through setting up a unified, cable-free storage hub using basic resources and minimal power.Beginner7 steps
RFTools · AutomationHow to Automate Multi-Step Recipes with the RFTools CrafterIn this guide, you will learn how to master the RFTools Crafter to automate complex, multi-step crafting chains within a single block. Unlike basic single-recipe auto-crafters, the RFTools Crafter can store up to eight sequential recipes and handle catalysts seamlessly, saving you massive amounts of factory space and piping.Beginner8 steps
RFTools · Setup guideHow to Set Up an RFTools Builder Quarry (Silk Touch, Voiding, and Pump)In this guide, you will learn how to set up the RFTools Builder as a high-speed automated quarry to harvest resources across entire chunks. Mastering the Builder and its various Shape Cards allows you to effortlessly mine ores with Silk Touch, automatically destroy junk blocks like dirt and cobblestone, and even drain massive fluid lakes without creating server lag.Intermediate8 steps
RFTools · PowerRFTools Power Endergenic Generator Setup: High-RF Ender Pearl Power PlantThe Endergenic Generator is one of the most rewarding and complex power sources in the RFTools family, capable of generating tens of thousands of RF per tick from a single Ender Pearl. Because it relies on precise tick-based timing rather than simple fuel burning, building one requires an understanding of redstone logic and pearl travel times. This guide walks you through the exact mechanics and provides a foolproof, self-sustaining 4-generator loop to power your late-game base and custom dimensions.Advanced7 steps
RFTools · ProgressionRFTools Power Progression Guide: Coal Generators, Blazing Power, and Wireless PowercellsMastering energy infrastructure is essential for running hungry RFTools machines like the Builder and Dimension Builder. This guide walks you through scaling your energy production from a basic Coal Generator to an automated Blazing Generator setup, while tying everything together with a cross-dimensional wireless Powercell network. By the end, you will have a reliable, wire-free RF grid capable of powering remote quarries and custom dimensions.Intermediate7 steps