RFTools · Explained · Intermediate
RFTools Builder Shield Projector Explained: Base Defense, Mob Traps, and Wither Cages
Mastering the RFTools Shield Projector allows you to generate impenetrable, customizable forcefields capable of filtering entities, dealing lethal damage, and withstanding the strongest explosions in Minecraft. In this guide, you will learn how to construct custom barriers using Shield Templates and Shape Cards, configure selective entity filters for automated mob traps, and build a 100% foolproof Wither killing chamber.
What you need
- Shield Projector (Tier 1, 2, 3, or 4 depending on your desired shield size and available blocks in your mod version)
- Shield Template blocks (Blue, Red, Green, or Yellow; used to trace your shield's physical shape)
- Shape Card (optional, allows projecting geometric shields without placing template blocks)
- Smart Wrench (for adjusting or troubleshooting blocks)
- Dimensional Shards (optional, required in the projector if you want the shield to deal player-kill drops and extra damage)
- A strong, continuous RF/FE power supply and power cables
- Camouflage block (optional, any solid block like Glass or Stone to disguise the shield)
Step by step
1Choose and Place Your Shield Projector
Craft a Shield Projector that fits the scale of your project. Higher-tier projectors support larger maximum block counts for a single shield—check JEI or the in-game RFTools manual to see the exact block limits for each tier in your version. Place the Shield Projector adjacent to where you want your barrier to start, and hook it up to a dedicated, high-capacity RF/FE power line.
Tip: Always connect the projector to an energy cell buffer rather than directly to a small generator, as shields draw sudden spikes of power when absorbing blast damage or damaging mobs.
2Method A: Trace Custom Barriers with Shield Templates
Craft Shield Template blocks of a single color (such as Blue). Place these template blocks directly touching one face of the Shield Projector, then build outward to form the exact wall, floor, or cage shape you want. When you open the Shield Projector GUI and click 'Compose', the machine scans every connected template block of that matching color and converts them into active shield blocks.
Tip: If you want two different shields to touch without merging into one massive power-draining grid, build the second shield using a different color of Shield Template.
3Method B: Project Geometric Shields with a Shape Card
If you want a large dome, box, or cylinder around your base without placing hundreds of template blocks by hand, craft a regular Shape Card. Right-click with the Shape Card in the air to open its configuration GUI, select a shape like 'Hollow Box' or 'Hollow Dome', and set your dimensions and offset coordinates relative to the projector. Insert the configured Shape Card into the specific card slot inside the Shield Projector GUI and hit 'Compose'.
Tip: Always select a 'Hollow' shape setting in the Shape Card GUI; solid shapes will fill the interior with shield blocks, trapping you and draining massive amounts of power.
4Configure Shield Appearance and Camouflage
Once composed, your shield defaults to a translucent colored energy barrier. Within the Shield Projector GUI, you can switch the visual mode between Invisible, Shield (translucent energy), or Mimic (Camouflage). To use Mimic mode, place any standard block—like Tinted Glass or Cobblestone—into the block slot at the top left of the GUI, and the entire active shield will visually copy that block's texture.
Tip: You can also adjust the RGB color sliders in the GUI to tint your translucent energy shield to match your base's aesthetic.
5Set Up Entity Filtering Rules
The real power of the Shield Projector lies in its filtering list on the right side of the GUI. Select an entity category—All, Passive, Hostile, Item, or Player—and choose actions: 'Sol' (makes the shield solid to them) and 'Dmg' (deals damage when they touch or pass through it). After selecting your entity type and checkmarks, click 'Add' to push that rule into the active filter box.
Tip: For a seamless base doorway, add two rules: set 'Player' with nothing checked (allowing you to walk right through) and set 'Hostile' to 'Sol' and 'Dmg' (blocking and killing monsters at the threshold).
6Upgrade to Player-Type Damage for Mob Farms
At the bottom of the projector GUI, notice the damage type toggle between 'Generic' and 'Player', alongside a slot for Dimensional Shards. Standard 'Generic' damage kills mobs with purely RF, whereas 'Player' damage simulates a player kill, forcing mobs to drop rare loot, experience orbs, and Blaze Rods. To enable 'Player' damage, switch the toggle and keep the shard slot stocked with Dimensional Shards, which are consumed slowly as mobs take damage.
Tip: In mob traps, leave 'Sol' unchecked for Hostile mobs and only check 'Dmg' so enemies walk straight inside the shield volume and take continuous damage across their entire hitbox.
7Construct the Wither Cage Framework
To build an inescapable Wither chamber, lay out a hollow 5x5x5 cube using Shield Templates (leaving a 3x3x3 empty space inside) directly touching your Shield Projector. Leave a small 1-block gap or use a redstone-controlled block placer system if you want to automate spawning, or simply leave one template block unplaced on the wall so you can build the Wither inside manually before sealing it.
Tip: Make sure the Shield Projector itself is tucked behind at least one layer of the Shield Template wall so the Wither cannot shoot a skull directly at the machine block.
8Seal and Execute the Wither Safely
Compose the cage, set its filter to 'All' -> 'Sol' so nothing can escape, and verify that the projector has a massive power buffer. Step inside, place the four Soul Sand and two Wither Skeleton Skulls, step out, and place the final skull. Immediately place the last Shield Template block in the doorway and click 'Compose' (and 'Decompose' first if required to refresh the scan) to lock the chamber before the Wither finishes charging up.
Tip: To let the shield kill the Wither automatically without your help, place a column of 2 or 3 extra Shield Template blocks directly inside the hollow 3x3x3 center, compose the shield, and set a 'Hostile' -> 'Dmg' rule so the boss suffocates in lethal forcefield blocks.
How it works
When you click 'Compose', the Shield Projector runs a flood-fill algorithm starting from its six adjacent block faces (or reads the mathematical coordinates from a Shape Card). It converts matching Shield Template blocks into tile-entity shield blocks that exist only as long as the projector remains powered and enabled. When you click 'Decompose', the shield blocks revert to your physical Shield Template blocks (or air, if using a Shape Card).
Unlike standard blocks that have a fixed blast resistance, active RFTools shield blocks convert incoming physical and explosive interactions into an RF/FE energy cost. Because the shield block itself cannot be broken by explosions—including the Wither's initial creation blast or charged blue skulls—it acts as indestructible bedrock as long as your battery never hits zero during the impact.
The filtering engine evaluates collision boxes dynamically per entity tick. Rather than acting as a static solid wall, the shield checks every touching entity against its prioritized rule list. This allows a single block space to act simultaneously as solid air to a player, a solid wall to a Creeper, and a damaging hazard zone, with each active check drawing an incremental amount of RF per tick.
Common mistakes
- Leaving the Shield Projector exposed to the Wither: While the shield blocks themselves are blast-proof, the Shield Projector machine is not. If the Wither has line-of-sight to the projector, a stray skull will destroy the machine and drop the entire shield instantly.
- Underestimating power spikes during Wither explosions: A passive shield draws very little idle power, leading players to use weak generators. When the Wither detonates or takes continuous tick damage, power draw spikes massively. If power runs out for even one tick, the shield collapses.
- Forgetting to re-compose after adding templates: Placing new Shield Template blocks onto an already active shield does nothing until you open the GUI, click 'Decompose' to reset the shape, and click 'Compose' again to scan the updated layout.
- Exceeding the projector's block limit: If part of your template cage stays as normal template blocks after hitting Compose, you have exceeded the maximum block capacity of that Shield Projector tier. Upgrade to a higher tier projector or shrink your build.
FAQ
Why are mobs getting blocked by my shield instead of walking inside my trap to take damage?
You likely enabled both 'Sol' (Solid) and 'Dmg' (Damage) on your Hostile filter rule. Remove the rule and re-add it with only 'Dmg' checked so mobs can walk right into the shield blocks and fry from the inside.
Can the Wither glitch through the corners of a Shield Template cage?
If a Wither spawns touching the edge of a 1-block-thick wall, it can occasionally clip outward if there are air pockets. Ensure your interior space is at least 3x3x3 so the Wither has room to expand, and keep corners fully filled in.
How do I turn the shield on and off remotely?
Every Shield Projector has a Redstone Mode button in its GUI. Change it from 'Ignored' to 'On to activate' or 'Off to activate', then attach a Lever, Wireless Redstone Receiver, or RFTools Logic Gate directly to the projector.
How do I collect the Nether Star inside a sealed Wither cage?
Add an 'Item' filter rule with 'Sol' unchecked so items can pass through the shield, or place an item collector block (such as an Absorption Hopper or RFTools Item Filter modular storage system) just outside the 1-block thick shield wall.
With the RFTools Shield Projector properly powered and filtered, you can turn simple template blocks or Shape Cards into selective one-way forcefields, lethal mob grinders, and indestructible Wither farming cages.