PneumaticCraft: Repressurized · Automation · Intermediate

PneumaticCraft Logistics Guide: Frames, Modules, and Storage Networks

PneumaticCraft: Repressurized features a versatile logistics system that moves items and fluids through standard Pressure Tubes or across the air via Logistics Drones. By mastering Logistics Frames and Logistics Modules, you can build an automated, prioritized sorting and machine-feeding network early in your progression. This guide will walk you through setting up a pressure-powered logistics network that keeps your storage organized and your machines constantly supplied.

What you need

  • Air Compressor (or Liquid Compressor) with a steady fuel source
  • Pressure Tubes (enough to connect your inventories and compressor)
  • Safety Tube Module (to prevent tube explosions)
  • Logistics Configurator (charged with compressed air at a Charging Station)
  • Logistics Modules (1 per connected inventory)
  • Logistics Frames: Passive Provider, Active Provider, Storage, Default Storage, and Requester
  • Chests, Fluid Tanks, or machines to connect to your network

Step by step

  1. 1Build and Pressurize the Tube Backbone

    Place your Air Compressor and run a continuous line of Pressure Tubes alongside the chests, tanks, and machines you want to connect. Install a Safety Tube Module somewhere on the line to vent excess pressure and prevent explosions. logistics operations require a moderate amount of pressure to function (check your in-game PneumaticCraft manual via Patchouli or JEI for exact bar thresholds) and consume a small amount of air each time items or fluids are transported.

    Tip: Always seal open tube ends by placing a block against them or disconnecting them with a Pneumatic Wrench so your network does not leak air into the world.

  2. 2Attach Logistics Modules to the Tubes

    Craft one Logistics Module for every inventory block you plan to include in the network. Right-click the side of a Pressure Tube facing directly toward an adjacent chest, tank, or machine to mount the module. When the tube line reaches sufficient operating pressure, the module's visual indicator will light up to show it is online and ready to route items.

    Tip: All Logistics Modules on the same continuous line of Pressure Tubes automatically talk to each other, even if the tubes branch off into different rooms.

  3. 3Configure Your Logistics Frames

    Before attaching a frame to a block, hold it in your hand and right-click in the air to open its configuration GUI. Here, you can define item or fluid filters by placing ghost items into the grid, or use whitelist and blacklist toggles. For Requester Frames, you must specify the exact stock quantity (or fluid millibuckets) you want the target block to maintain at all times.

    Tip: If you need to adjust a frame after placing it on an inventory, sneak-right-click the frame using your charged Logistics Configurator to reopen its settings GUI.

  4. 4Set Up Your Supply (Provider Frames)

    Attach Passive Provider Frames (red) or Active Provider Frames (purple) to the inventories that supply resources by right-clicking the target block directly in the world. Make sure a Logistics Module on a pressurized tube is pointing right at that framed block. Use a Passive Provider on buffer chests where items should wait until specifically requested, and use an Active Provider on drop-off chests (like a quarry dump chest) that you want emptied immediately into your storage system.

    Tip: Active Providers will aggressively push their contents into any valid Storage or Requester frame, so avoid putting them on main storage chests or you will create endless item loops.

  5. 5Establish Main Storage (Storage Frames)

    Attach yellow Storage Frames to your main bank of sorted chests or fluid tanks, and configure their filters to only accept specific items (such as ores or plastic sheets). Next, place green Default Storage Frames on a few unfiltered overflow chests. Because regular Storage Frames have a higher priority than Default Storage Frames, incoming items from Active Providers will always try to sort into your filtered chests first before falling back to the overflow chests.

    Tip: Storage Frames act as both receivers and providers: they accept pushed items from Active Providers and also supply items whenever a Requester Frame asks for them.

  6. 6Automate Machine Inputs (Requester Frames)

    Place blue Requester Frames on blocks that constantly need specific materials, such as a Furnace input chest, a Thermopneumatic Processing Plant, or a Pressure Chamber Interface. Open the Requester Frame's GUI and set the exact item or fluid count you want kept inside that inventory (for example, 32 Iron Ore or 4000mB of Oil). As soon as the block's internal count drops below your set number, the network will automatically pull the difference from any Provider or Storage frame and zip it through the tubes.

    Tip: Keep requested stack sizes modest (like 8 or 16 items) when feeding multiple processing machines so a single machine does not hog your entire supply of raw materials.

  7. 7Color-Code Channels for Isolated Sub-Networks

    As your factory grows, you might want certain machines to share a single heavy-duty Pressure Tube backbone without mixing their logistics networks together. Right-click any attached Logistics Module to open its GUI and change its color channel. Only Logistics Modules set to the exact same color channel will exchange items and fluids with one another, allowing up to 16 completely independent logistics networks on one tube line.

    Tip: Upgrading a Logistics Module with an Advanced PCB in its GUI allows you to fine-tune its channel settings and significantly increases its transfer speed.

How it works

The PneumaticCraft logistics system operates on a strict priority hierarchy based on Frame types. From lowest to highest priority regarding where items are stored or pulled, the order is: Active Provider (purple) -> Default Storage (green) -> Storage (yellow) -> Passive Provider (red) -> Requester (blue). An Active Provider has no storage desire—it forces items out to any Requester, Storage, or Default Storage frame available. Conversely, a Requester Frame sits at the top of the chain; it only pulls items in and never gives them back to the network.

Understanding the difference between Storage (yellow) and Passive Provider (red) frames prevents circular routing bugs. A Passive Provider only holds items and waits for a blue Requester Frame to ask for them; it will never accept items from the network. A Storage Frame, however, both accepts surplus items pushed out by Active Providers (or excess pulled from Default Storage) and provides those items when a Requester Frame demands them. Furthermore, if a filtered Storage Frame has space for an item that is currently sitting inside a lower-priority Default Storage Frame, the network will automatically migrate that item from Default Storage into the proper filtered Storage chest.

Logistics Modules are the physical bridges between your inventories and the Pressure Tube line. A Logistics Frame attached to a chest does nothing on its own unless a Logistics Module on a pressurized tube is pointing directly at that chest (or unless a Logistics Drone is operating in the area). Whenever a valid transfer pair is found on the same tube network and color channel, the module consumes a small amount of compressed air proportional to the distance traveled and sends the item or fluid packet travelling visually through the tubes.

Common mistakes

  • Pointing the Logistics Module at the Frame instead of the Inventory: Logistics Frames are non-solid overlays that occupy the block space adjacent to a chest. Always make sure your Logistics Module is mounted on a tube that sits directly adjacent to the chest or machine block itself, pointing straight into the inventory.
  • Using Passive Providers for Main Storage: If you put red Passive Provider Frames on your main storage wall and dump items into a purple Active Provider chest, nothing will move. Active Providers can only push into Storage, Default Storage, or Requester frames—never into Passive Providers.
  • Letting Tube Pressure Drop Too Low: Logistics Modules need a minimum bar pressure to stay active, and every transfer drains air from the line. If transfers suddenly stall, check a Tube Gauge Module on the line to ensure your compressor is keeping up with demand.
  • Requesting Huge Stack Counts on Machines: Setting a Requester Frame to keep 640 cobblestone inside a single furnace will result in the system jamming or dropping excess items when the inventory fills up. Always set the requested quantity inside a Requester Frame to be well within the actual slot capacity of the target block.

FAQ

How do I remove or move a Logistics Frame once it is placed?

Use a charged Logistics Configurator: sneak-left-click (or use the dedicated wrench/configurator action depending on your version's bindings) on the frame to pop it off instantly as an item without breaking the chest behind it.

Can the logistics system transport fluids as well as items?

Yes! Most Logistics Frames have a fluid filter tab in their GUI. Attach a frame to any fluid tank or fluid-accepting machine (like a Refinery or Thermopneumatic Processing Plant), place a fluid container (like a bucket of Oil) into the filter slot to set the ghost fluid, and specify the millibucket amount.

What is the difference between using Pressure Tubes with Logistics Modules vs. Logistics Drones?

Logistics Modules on Pressure Tubes only route between inventories physically wired together on the same tube line, which is cheap, fast, and reliable for indoor bases. A Logistics Drone is a free-flying entity that automatically services any framed block within its programmed area without needing tubes connected to the chests, ideal for farms or spread-out builds.

Why are my frames invisible when I walk away from my chests?

To reduce visual clutter, Logistics Frames can be toggled into a semi-invisible state in their GUI. When hidden, they will only render clearly when you hold a Logistics Configurator or another Logistics Frame in your hand.

By combining pressurized Logistics Modules with the five priority-based Logistics Frames, you can build a smart, self-sorting item and fluid distribution network that carries you easily through PneumaticCraft: Repressurized's mid-game.

More PneumaticCraft: Repressurized guides

PneumaticCraft: Repressurized · Getting startedPneumaticCraft: Repressurized Getting Started & Progression GuideThis guide walks you through the foundational stages of PneumaticCraft: Repressurized, taking you from explosive raw materials to your first pressurized machines and plastic production. Mastering these early steps is essential because compressed air, heat management, and plastic form the backbone of all advanced automation, programmable drones, and high-tier armor in the mod.Beginner7 steps
PneumaticCraft: Repressurized · ExplainedAir Pressure, Volume, and Danger Limits ExplainedMastering the relationship between air volume, pressure, and danger limits is the single most important skill in PneumaticCraft: Repressurized. This guide will teach you the core math behind compressed air, how to safely scale your storage with Volume Upgrades, and how to prevent your machines from violently exploding.Beginner7 steps
PneumaticCraft: Repressurized · TroubleshootingHow to Prevent Pipe and Machine Explosions (Troubleshooting Guide)In PneumaticCraft: Repressurized, leaving an Air Compressor running unchecked will inevitably cause your Pressure Tubes and machines to explode violently. This beginner's troubleshooting guide will teach you how to build a completely explosion-proof pneumatic network using Safety Tube Modules, Pressure Gauge Tube Modules, and Regulator Tube Modules. Mastering pressure control protects your hard-earned base and prevents costly fuel waste.Beginner8 steps
PneumaticCraft: Repressurized · Setup guideHow to Build and Automate the Pressure ChamberIn this guide, you will learn how to construct and fully automate the Pressure Chamber in PneumaticCraft: Repressurized. Mastering this core multiblock machine is essential because it unlocks the automated production of Compressed Iron, Transistors, Capacitors, and Empty PCBs required for all advanced pneumatic technology.Beginner7 steps
PneumaticCraft: Repressurized · ExplainedPneumaticCraft Heat Mechanics and Thermal Management ExplainedMastering the heat mechanics in PneumaticCraft: Repressurized is essential for advancing beyond basic pressure generation into oil refining, plastic production, and high-tier automation. This guide explains the underlying physics of thermal resistance and heat capacity, showing you how to manipulate temperatures using Vortex Tubes, Heat Sinks, and thermal conductors. By the end, you will be able to efficiently heat industrial processors and keep advanced compressors running at peak efficiency.Intermediate7 steps
PneumaticCraft: Repressurized · Setup guideComplete Oil Refining and Plastic Production Line SetupIn this guide, you will learn how to build a complete oil extraction and refining setup in PneumaticCraft: Repressurized to automate the production of Plastic Sheets. Mastering this thermal and pneumatic production line is essential for mid-to-late game progression, as plastic unlocks advanced circuit boards, Programmable Drones, and high-tier pneumatic machinery. Along the way, you will also generate high-efficiency liquid fuels to power your base's compressors.Intermediate7 steps