PneumaticCraft: Repressurized · Getting started · Beginner
PneumaticCraft: Repressurized Getting Started & Progression Guide
This guide walks you through the foundational stages of PneumaticCraft: Repressurized, taking you from explosive raw materials to your first pressurized machines and plastic production. Mastering these early steps is essential because compressed air, heat management, and plastic form the backbone of all advanced automation, programmable drones, and high-tier armor in the mod.
What you need
- Plenty of Iron Ingots or Blocks of Iron
- TNT or Creeper spawn access (plus Flint and Steel or a Redstone signal)
- Cobblestone, Furnaces, Glass, and Redstone
- Buckets for fluid handling
- Coal, Charcoal, or other standard solid furnace fuels
- Gold, Lapis Lazuli, and Diamonds (for mid-game progression)
- Patchouli in-game guide book (PNC:R Manual) and JEI installed for exact recipes
Step by step
1Perform Explosion Crafting for Compressed Iron
To begin, you need Ingots of Compressed Iron, which are created by exposing regular Iron Ingots or Blocks of Iron to an explosion. Throw your iron on the ground, place a block of TNT right next to it, and ignite the TNT from a safe distance. The blast will convert a large percentage of the iron into Compressed Iron, though a small, configurable portion will be lost to the explosion.
Tip: Surround your blast zone with Obsidian or waterlogged walls to prevent terrain damage, and compress whole Blocks of Iron at once to process bulk quantities safely.
2Craft the Pneumatic Wrench and Pressure Tubes
Use your new Ingots of Compressed Iron to craft Pressure Tubes, which serve as the power cables of this mod. You should also immediately craft a Pneumatic Wrench and a Manometer (check JEI for the exact layout). The wrench allows you to rotate machines and dismantle pneumatic components instantly without breaking them, while the Manometer lets you inspect exact pressure levels inside any tube or block.
Tip: Keep your leftover Compressed Iron safe; once you build a Pressure Chamber, you can compress iron with zero loss Rate.
3Build a 3x3x3 Pressure Chamber
The Pressure Chamber is a hollow multiblock structure required for loss-free compression and crafting advanced components like Turbine Blades and Etching Acid ingredients. Craft Pressure Chamber Walls (or Windows to see inside), one Pressure Chamber Valve, and two Pressure Chamber Interfaces. Build a hollow 3x3x3 cube with a 1x1x1 empty space in the middle: place the Valve on one face to accept air, and place the two Interfaces on opposite sides so one faces inward (input) and the other faces outward (output).
Tip: You can set item filters on the Interfaces—for instance, put a finished product in the output filter so the chamber doesn't accidentally eject raw materials before they finish compressing.
4Power the Chamber with an Air Compressor
Craft a basic Air Compressor and connect its output port to your Pressure Chamber Valve using Pressure Tubes. Make sure there are no open, unconnected ends on your tubes, or the air will simply hiss out into the atmosphere. Place solid fuel like Coal into the Air Compressor to begin pumping air into the chamber, and install a Security Upgrade inside both the Compressor and the Valve to prevent catastrophic overpressure explosions.
Tip: Hook a Redstone Comparator or a Gauge Tube Module up to your tube line to automatically shut off the Air Compressor with a Redstone signal when pressure nears the 5 bar threshold.
5Locate Oil and Set Up a Refinery
Explore the world to find natural Oil lakes generating on the surface or underground, and collect several buckets of Crude Oil (or use a Gas Lift to pump it up). Craft a Refinery Controller and at least two to four Refinery Outputs, stacking the Outputs directly on top of the Controller. Pump or bucket Crude Oil into the Refinery Controller, then place a heat source—such as a Vortex Tube (powered by compressed air) or a simple Magma Block/Torch early on—directly adjacent to the controller to heat it above 100°C.
Tip: Insulate your heated machines by surrounding exposed faces with solid blocks or Thermal Lagging; exposed faces leak heat into the air and waste energy.
6Refine Oil into LPG and Craft Molten Plastic
As the Refinery heats up, it splits Crude Oil into Diesel, Kerosene, Gasoline, and finally LPG (Liquefied Petroleum Gas) in the topmost output block. Route the LPG into a Thermopneumatic Processing Plant alongside Coal, then apply both heat and a small amount of air pressure (check JEI for the exact temperature requirement). This chemical reaction produces Molten Plastic. Pipe the Molten Plastic into a Liquid Hopper aimed at an empty 1x1 space in the world (or use a Heat Frame on an inventory) to cool and solidify it into Plastic Sheets.
Tip: Don't waste the heavier fuels like Diesel and Kerosene! Burn them in a Liquid Compressor for massively improved air generation compared to coal, or upgrade them into lighter fuels using a Thermopneumatic Processing Plant.
7Advance to Electronics and Assembly Lines
With Plastic Sheets unlocked, you have reached the mid-game tech tree. Put Plastic into your Pressure Chamber alongside Gold, Redstone, and other materials to create Empty PCBs, then etch them in Etching Acid and assemble them into Printed Circuit Boards. These PCBs allow you to build the Assembly Line—a set of robotic arms and lasers that craft Tier 2 Advanced Pressure Tubes (capable of handling 20 bar), Flux Compressors, and Programmable Drones.
Tip: Build a UV Light Box powered by compressed air to expose your Empty PCBs to 100% before putting them in Etching Acid; this dramatically speeds up etching and saves acid.
How it works
Unlike mods that use linear energy units like Forge Energy (FE), PneumaticCraft operates on the physics of Boyles Law: Pressure equals Air Volume divided by Machine Volume. Generating air increases the total air quantity (measured in mL) inside a closed system. Because different machines and multiblocks have different internal volumes, a tiny tube fills up to high pressure (measured in bar) in seconds, while a large 3x3x3 Pressure Chamber takes much longer to reach the exact same pressure.
Safety and pressure tiers dictate your entire base layout. Tier 1 components (standard Pressure Tubes, Air Compressors, and basic machines) have a maximum safe threshold of 5 bar and will violently explode near 7 bar. Furthermore, any open tube end acts as a hole in the system, rapidly venting all stored air back to 0 bar. To run machines continuously without baby-sitting them, you must either use Security Upgrades (which safely vent excess air like a relief valve) or automate your compressors to turn off via Redstone when the system reaches target pressure.
The second core pillar is the Heat system. Compressors beyond the basic tier generate waste heat that slows down their efficiency unless you cool them with Heat Sinks or Water. Conversely, processing machines like the Refinery and Thermopneumatic Processing Plant require high heat to function. Heat naturally flows from hotter blocks to colder adjacent blocks, and leaks into open air blocks. Mastering how to generate heat with a Vortex Tube—which splits compressed air into a hot side and a freezing cold side—is the key to automating plastic and fuel refining.
Common mistakes
- Leaving an open end on a Pressure Tube network. If your Pressure Chamber isn't building pressure, follow your tube line and listen for a hissing sound; every exposed connection must be capped or connected to a sealed machine.
- Running an Air Compressor with solid blocks like Coal Blocks without a Security Upgrade or Redstone shutoff. A compressor will keep burning fuel even when a machine is idle, easily pushing Tier 1 tubes past 5 bar and blowing up your workshop.
- Throwing single Iron Ingots at TNT instead of Blocks of Iron. Explosion crafting applies its loss rate calculation per item entity, and loose ingots can easily be destroyed by secondary blasts if your TNT chain-reacts.
- Breaking a pressurized Pressure Chamber wall or interface without venting it first. Always make sure your chamber is at a safe pressure or use the Pneumatic Wrench properly, and never break the multiblock while items are actively mid-recipe inside.
- Leaving heated machines like the Refinery exposed to open air on all sides. Air blocks drain thermal energy constantly; cover unused machine faces with non-conductive blocks to reach target temperatures faster and save fuel.
FAQ
Why isn't my Pressure Chamber Interface accepting or ejecting items?
Interfaces require sufficient air pressure inside the chamber to open and close their airlock doors. Additionally, check that the input Interface has its 'I' side facing into the chamber and that you haven't accidentally placed an item in the Interface's GUI filter slot that blocks your ingredients.
Where did the Plastic Plants and seeds go from older versions of PneumaticCraft?
In PneumaticCraft: Repressurized for modern Minecraft versions, Plastic Plants were completely removed and replaced by the Crude Oil refining and Thermopneumatic Processing chain.
Can I power my pneumatic machines using Forge Energy (RF/FE) from other mods?
Yes, once you progress into mid-game and unlock Plastic and PCBs, you can craft a Flux Compressor, which converts standard Forge Energy directly into compressed air (while generating heat that you must dissipate).
How do I stop my Vortex Tube from wasting air while heating my Refinery?
Put a Heat Sink on the cold side of the Vortex Tube! Because the hot and cold sides are thermally linked inside the block, letting the cold side freeze down to extreme sub-zero temperatures actually throttles the hot side's ability to generate heat.
By progressing from explosive Compressed Iron to a regulated Pressure Chamber and an oil-to-plastic refinery, you unlock the entire suite of high-pressure automation, programmable drones, and advanced machinery in PneumaticCraft: Repressurized.